(c) 2007,2008 Dream Multimedia GmbH. All rights reserved.

Dreambox D M800

FIRST STAGE 1.01(0x133/high) {BO23456}


2ND STAGE OK, build #82 (2011-02-25)

0.000  - BCM board setup
0.002  - fp init
0.003  - ca init
0.889  - load config
0.916  - config loaded.
 * press [S] to enter setup
OLED found!
lcd: BOOT #82
 - read config file: /boot/secondstage.conf
detected jffs2 blocksize: 16kb
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++
dreamupd initialized
Scanning JFFS2 FS:   .  | / - \ | / - \ | / - \ | /  done.

find_inode failed for name=secondstage.conf

load: Failed to find inode

 - failed to open /boot/secondstage.conf
 - failed to open /cf/autorun.bat
lcd: /flash/bootlogo.elf
bootlogo size: 35911
***  BCHP: Invalid RTS setting detected. Forcing MEMC_0_CLIENT_INFO_7 (AVD_CAB_0) RR to true. Please see latest 7401 RTS documentation.
no HDMI device detected
no HDMI mode available, reverting to 720p
using 1280x720p (60.00 Hz)
create surface 1280 720
Using the Small jpeg decoder library, Copyright (c) 2006, Luc Saillard <luc@saillard.org>
parsing JPEG header..
Virtual FB Size: 1280x720
lcd: /flash/vmlinux.gz
<5>Linux version 2.6.18-7.4-dm800 (newnigma2@vs35) (gcc version 4.4.3 (GCC) ) #1 Mon May 2 10:40:55 UTC 2011
Fetching vars from bootloader... none present, using defaults.
board_init_once: regval=44ac6502, ddr_strap=3, 4 chips, pci_size=2
Detected 256 MB on board
<4>WARNING: read invalid MAC address ff:ff:ff:ff:ff:ff from flash @ 0xbffff824
Default command line = 
root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
2 831ffeb8 83029368
g_board_RAM_size=256MB
Options: sata=1 enet=1 emac_1=0 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=0
CPU revision is: 00020000
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
---> memsize from bootloader: 148
User-defined physical RAM map:
node [00000000, 09400000: RAM]
node [09400000, 06c00000: RSVD]
<5>Reserving 108 MB upper memory starting at 09400000
<7>On node 0 totalpages: 65536
<7>  DMA zone: 65536 pages, LIFO batch:15
Built 1 zonelists.  Total pages: 65536
<5>Kernel command line: console=ttyS0,115200 root=/dev/mtdblock3 rootfstype=jffs2 rw
before init RAC 0x02a00000	0x00000000
after init RAC 0x02a0000f	0x0fff0000
[4294667.296000] Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes.

[4294667.296000] Primary data cache 32kB, 2-way, linesize 16 bytes.

[4294667.296000] Synthesized TLB refill handler (20 instructions).

[4294667.296000] Synthesized TLB load handler fastpath (32 instructions).

[4294667.296000] Synthesized TLB store handler fastpath (32 instructions).

[4294667.296000] Synthesized TLB modify handler fastpath (31 instructions).

[4294667.296000] timer irq 67 end 57

[4294667.296000] PID hash table entries: 2048 (order: 11, 8192 bytes)

[4294667.296000] Found MIPS counter frequency: 149 Mhz

[4294667.296000] Using 148.501 MHz high precision timer.

[4294667.296000] Console: colour dummy device 80x25

[4294667.296000] ################## brcm_serial_console_init, sercon=80301a80

[4294667.369000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

[4294667.378000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

[4294667.412000] Memory: 145664k/262144k available (2687k kernel code, 116412k reserved, 593k data, 128k init, 0k highmem)

[4294667.446000] Mount-cache hash table entries: 512

[4294667.452000] Checking for 'wait' instruction...  available.

[4294667.461000] NET: Registered protocol family 16

[4294667.467000] registering PCI controller with io_map_base unset

[4294667.473000] registering PCI controller with io_map_base unset

[4294667.481000] SCSI subsystem initialized

[4294667.486000] usbcore: registered new driver usbfs

[4294667.491000] usbcore: registered new driver hub

[4294667.497000] SATA: Primary Bus Master Status Register offset = b0520000 + 00000300 = b0520300

[4294667.506000] SATA: before init Primary Bus Master Status reg = 0x00000000.

[4294667.513000] SATA: after init Primary Bus Master Status reg = 0x00000020.

[4294667.521000] NET: Registered protocol family 2

[4294667.535000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)

[4294667.543000] TCP established hash table entries: 8192 (order: 3, 32768 bytes)

[4294667.551000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)

[4294667.558000] TCP: Hash tables configured (established 8192 bind 4096)

[4294667.565000] TCP reno registered

[4294667.573000] JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.

[4294667.580000] Initializing Cryptographic API

[4294667.585000] io scheduler noop registered

[4294667.589000] io scheduler anticipatory registered (default)

[4294667.595000] io scheduler deadline registered

[4294667.599000] io scheduler cfq registered

[4294667.612000] Broadcom serial driver version 1.00 (2000-11-09) with SERIAL_PCI enabled

[4294667.634000] Broadcom BCM7401 P31 Ethernet Network Device v2.0 May  2 2011 10:38:17

[4294667.642000] SUNDRY revision = 74010021, have IP Hdr Opt=1

[4294667.655000] Config Internal PHY Through MDIO: 100 MB Full-Duplex (auto-neg)

[4294669.332000] ata1: SATA max UDMA/133 cmd 0xB0510000 ctl 0xB0510020 bmdma 0xB0510030 irq 42

[4294669.341000] scsi0 : sata_svw

[4294669.651000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl F0000)

[4294669.657000] ATA: ata_busy_wait 0xD0 timeout spinup?!? 4960 msecs left

[4294669.706000] ata1.00: ATA-7, max UDMA/100, 156301488 sectors: LBA48 

[4294669.713000] ata1.00: ata1: dev 0 multi count 0

[4294669.719000] ata1.00: configured for UDMA/100

[4294669.725000]   Vendor: ATA       Model: HTS541080G9SA00   Rev: MB4I

[4294669.731000]   Type:   Direct-Access                      ANSI SCSI revision: 05

[4294669.740000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)

[4294669.747000] sda: Write Protect is off

[4294669.751000] SCSI device sda: drive cache: write back

[4294669.757000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)

[4294669.764000] sda: Write Protect is off

[4294669.768000] SCSI device sda: drive cache: write back

[4294669.774000]  sda: sda1

[4294670.135000] sd 0:0:0:0: Attached scsi disk sda

[4294670.140000] sd 0:0:0:0: Attached scsi generic sg0 type 0

[4294670.146000] Broadcom STB NAND controller (BrcmNand Controller)

[4294670.153000] B4: NandSelect=40000002, nandConfig=04042300, chipSelect=1

[4294670.160000] brcmnand_probe: CS1: dev_id=ad76ad76

[4294670.165000] After: NandSelect=40000002, nandConfig=04042300

[4294670.171000] NAND Config: Reg=04042300, chipSize=64 MB, blockSize=16K, erase_shift=e

[4294670.179000] busWidth=1, pageSize=512B, page_shift=9, page_mask=000001ff

[4294670.186000] timing1 not adjusted: 5363444f

[4294670.190000] timing2 not adjusted: 00000fc6

[4294670.194000] BrcmNAND mfg ad 76 Hynix HY27US08121A (dream) 64MB

[4294670.200000] 

[4294670.200000] Found NAND: ACC=00000000, cfg=04042300, flashId=ad76ad76, tim1=5363444f, tim2=00000fc6

[4294670.212000] BrcmNAND version = 0x0001 64MB @00000000

[4294670.217000] Found NAND chip on Chip Select 1, chipSize=64MB, usable size=64MB, base=14000000

[4294670.226000] ACC_CONTROL B4: 00000000

[4294670.229000] ACC_CONTROL after: 20000000

[4294670.233000] page_shift=9, bbt_erase_shift=14, chip_shift=26, phys_erase_shift=14

[4294670.241000] Brcm NAND controller version = 0.1 NAND flash size 64MB @14000000

[4294670.249000] mtd->oobsize=16, mtd->eccOobSize=16

[4294670.253000] brcmnand_scan:  mtd->oobsize=16

[4294670.258000] brcmnand_scan: oobavail=12, eccsize=512, writesize=512

[4294670.264000] brcmnand_scan, eccsize=512, writesize=512, eccsteps=1, ecclevel=15, eccbytes=3

[4294670.273000] brcmnand_default_bbt: bbt_td = bbt_main_descr

[4294670.280000] brcmnandCET: Status -> Deferred

[4294670.285000] 	numchips=1, size=4000000

[4294670.289000] Creating 4 MTD partitions on "bcm7xxx-nand.0":

[4294670.295000] 0x0000000000000000-0x0000000004000000 : "complete"

[4294670.305000] 0x0000000000000000-0x0000000000040000 : "loader"

[4294670.311000] 0x0000000000040000-0x0000000000400000 : "boot partition"

[4294670.318000] 0x0000000000400000-0x0000000004000000 : "root partition"

[4294670.329000] ehci_hcd_brcm_init: Initializing 1 EHCI controller(s)

[4294670.335000] 10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm-0)

[4294670.344000] drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller

[4294670.351000]  - USB h/w setup mode <B>

[4294670.351000]  - USB power enable set for active LOW mode

[4294670.360000] brcm-ehci brcm-ehci.0: BRCM EHCI

[4294670.365000] brcm-ehci brcm-ehci.0: new USB bus registered, assigned bus number 1

[4294670.373000] brcm-ehci brcm-ehci.0: irq 62, io mem 0x10480300

[4294670.379000] brcm-ehci brcm-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004

[4294670.388000] usb usb1: configuration #1 chosen from 1 choice

[4294670.394000] hub 1-0:1.0: USB hub found

[4294670.398000] hub 1-0:1.0: 2 ports detected

[4294670.504000] ohci_hcd_brcm_init: Initializing 2 OHCI controller(s)

[4294670.511000] 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-0)

[4294670.519000] drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller

[4294670.526000]  - Resetting at b0480408

[4294670.530000] <-- brcm_start_hc

[4294670.533000] brcm-ohci-0 brcm-ohci-0.0: BRCM OHCI

[4294670.538000] brcm-ohci-0 brcm-ohci-0.0: new USB bus registered, assigned bus number 2

[4294670.547000] brcm-ohci-0 brcm-ohci-0.0: irq 63, io mem 0x10480400

[4294670.608000] usb usb2: configuration #1 chosen from 1 choice

[4294670.614000] hub 2-0:1.0: USB hub found

[4294670.619000] hub 2-0:1.0: 2 ports detected

[4294670.724000] 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-1)

[4294670.733000] drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller

[4294670.740000]  - Resetting at b0480508

[4294670.744000] <-- brcm_start_hc

[4294670.747000] brcm-ohci-1 brcm-ohci-1.1: BRCM OHCI

[4294670.752000] brcm-ohci-1 brcm-ohci-1.1: new USB bus registered, assigned bus number 3

[4294670.760000] brcm-ohci-1 brcm-ohci-1.1: irq 64, io mem 0x10480500

[4294670.822000] usb usb3: configuration #1 chosen from 1 choice

[4294670.828000] hub 3-0:1.0: USB hub found

[4294670.832000] hub 3-0:1.0: 2 ports detected

[4294670.938000] Initializing USB Mass Storage driver...

[4294670.944000] usbcore: registered new driver usb-storage

[4294670.949000] USB Mass Storage support registered.

[4294670.954000] i2c /dev entries driver

[4294670.958000] Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).

[4294670.968000] ALSA device list:

[4294670.971000]   No soundcards found.

[4294670.975000] TCP bic registered

[4294670.979000] NET: Registered protocol family 1

[4294670.983000] NET: Registered protocol family 17

[4294671.526000] Empty flash at 0x0043d1ec ends at 0x0043d200

[4294673.853000] Empty flash at 0x014b5620 ends at 0x014b5800

[4294679.440000] VFS: Mounted root (jffs2 filesystem).

[4294679.447000] Freeing unused kernel memory: 128k freed


INIT: version 2.86 booting

[4294680.761000] stb_core: module license 'Proprietary' taints kernel.

[4294680.912000] 4008583 ms: 

[4294680.972000] 57 ms: 27 Starting /etc/rcS.d/S02sysfs...

[4294680.994000] 17 ms: =s

Start UDEV
[4294684.361000] 3364 ms: 29 Starting /etc/rcS.d/S03udev...

[4294684.383000] 16 ms: =s

[4294684.403000] 17 ms: 31 Starting /etc/rcS.d/S04bootup...

[4294684.410000] 2 ms: 10

[4294684.723000] Empty flash at 0x0020a634 ends at 0x0020a800

[4294685.216000] kjournald starting.  Commit interval 5 seconds

[4294685.222000] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended

[4294685.231000] EXT3 FS on sda1, internal journal

[4294685.236000] EXT3-fs: mounted filesystem with ordered data mode.

[4294685.253000] 840 ms: 11

[4294685.287000] 31 ms: 12

modprobe: module nfsd not found in modules.dep
[4294685.582000] cdfs 2.6.27 loaded.

[4294685.720000] fuse init (API version 7.8)

[4294685.724000] fuse distribution version: 2.7.6

modprobe: module tun not found in modules.dep
modprobe: module ipv6 not found in modules.dep
modprobe: module nls_cp437 not found in modules.dep
[4294686.180000] usbcore: registered new driver usbserial

[4294686.185000] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic

[4294686.194000] usbcore: registered new driver usbserial_generic

[4294686.200000] drivers/usb/serial/usb-serial.c: USB Serial Driver core

[4294686.243000] drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device

[4294686.253000] usbcore: registered new driver ftdi_sio

[4294686.258000] drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver

[4294686.360000] drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303

[4294686.369000] usbcore: registered new driver pl2303

[4294686.374000] drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver

modprobe: module hfs not found in modules.dep
modprobe: module hfsplus[4294686.511000] 1221 ms: 13

 not found in module[4294686.515000] 1 ms: 14

s.dep

/dev/sda:
 setting acoustic management to 128
 acoustic      = 128 (128[4294686.655000] 137 ms: 15

=quiet ... 254=fast)
[4294686.693000] input: dreambox remote control (native) as /class/input/input0

[4294686.701000] input: dreambox advanced remote control (native) as /class/input/input1

[4294686.876000] input: dreambox ir keyboard as /class/input/input2

[4294686.883000] input: dreambox ir mouse as /class/input/input3

[4294689.337000] enter base init, xvd 20090807, vdc 20080313, rap 20090430, xpt 20080313

[4294689.345000] kernMemSize : 148 MB

[4294689.360000] 22:64020000 SMCA: controller reset timed out

[4294691.873000] register adapter

[4294691.877000] register adapter

[4294691.880000] register adapter

[4294691.883000] register adapter

[4294691.887000] register adapter

[4294691.891000] input: dreambox front panel as /class/input/input4

[4294691.924000] HDMI: no device attached

[4294691.928000] set sb to 3(2)

[4294691.931000] set fb to 2(-1)

[4294691.934000] set input to 0

[4294691.937000] set fb to 2(-1)

[4294691.942000] bcm_video_analog_port_setup (fmt=6)

[4294691.947000] SET FORMAT: display[1], format=6

[4294691.952000] display 0 uses vbi path 1

[4294691.956000] display 1 uses vbi path 0

[4294691.960000] HDMI: hotplug handler!

[4294691.964000] HDMI: no device attached

[4294691.968000] using 50.00Hz as MonitorRefreshRate

[4294691.972000] SET FORMAT: display[0], format=24

[4294691.977000] set fb to 2(0)

[4294691.980000] bcm_video_analog_port_setup (fmt=6)

[4294691.985000] SET FORMAT: display[1], format=6

[4294692.030000] disable wss on display 0

[4294692.034000] disable wss on display 1

[4294692.038000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)

[4294692.242000] enable mad

[4294692.311000] VIDEO0: set fallback framerate to 60000

[4294692.316000] VIDEO0: set progressive override mode to 1

[4294692.321000] VIDEO0: set streamtype!

[4294692.325000] set MPEG2

[4294692.328000] sw rave disabled!

[4294692.337000] sync is off so we enable it

[4294692.341000] playback!

[4294692.344000] total video delay: 0 (0 ms)

[4294692.355000] VIDEO0: start decode

[4294692.359000] flush video decoder

[4294692.362000] VIDEO0 got pts failed !!!! (ret 0)

[4294692.823000] set ac3 to downmix

[4294692.826000] set aac to downmix

[4294692.870000] VIDEO0: first pts 0x0

[4294692.886000] init ALSA!

[4294692.893000] DVB: registering new adapter (BCM7401)

[4294693.043000] autodetecting NIMs...

[4294693.048000] ret: 2, feid: 06

[4294693.052000] Found: Slot A, ID: 06 (by CA)

[4294693.056000] Initializing adapter 0 (Alps BSBE2-DVB-S2)

[4294693.062000] special BSBE2 treatment:

[4294693.891000] enable tsm0

[4294693.893000] cx24116: invalid id: 7d

[4294693.897000] (failed)

[4294694.928000] special BSBE2 treatment:

[4294699.500000] DVB: registering adapter 0 frontend 0 (cx24116)...

[4294699.507000] registered vtuner vtuner0, minor 60

[4294699.513000] registered vtuner vtuner1, minor 59

[4294701.544000] VIDEO0: stop decode

[4294701.547000] no decoder left in sync handling so disable xpt_sync

[4294701.568000] 14910 ms: 16

[4294701.573000] 1 ms: 17

[4294701.580000] 4 ms: 18

[4294701.603000] 20 ms: 19

[4294701.627000] 21 ms: 20

[4294701.632000] 1 ms: 21

[4294701.657000] 22 ms: 22

[4294701.661000] 2 ms: 23

[4294701.666000] 3 ms: 24

[4294701.805000] using 50.00Hz as MonitorRefreshRate

[4294701.953000] SET FORMAT: display[0], format=18

[4294701.958000] bcm_video_analog_port_setup (fmt=6)

[4294702.112000] SET FORMAT: display[1], format=6

[4294702.131000] set current avs auto aspect to 16:9

[4294702.136000] disable wss on display 0

[4294702.140000] disable wss on display 1

[4294702.144000] set sb to 3(1)

[4294702.211000] VIDEO0: set blank to 0

[4294702.216000] sync is off so we enable it

[4294702.220000] playback!

[4294702.222000] total video delay: 0 (0 ms)

[4294702.296000] VIDEO0: start decode

[4294702.333000] flush video decoder

[4294702.970000] VIDEO0: first pts 0x0

[4294702.974000] VIDEO0: framerate changed 3

[4294702.978000] VIDEO0: resolution changed (1280 720)

[4294702.983000] VIDEO0: aspect changed 3

[4294702.988000] set current avs auto aspect to 16:9

[4294702.994000] disable wss on display 0

[4294702.998000] disable wss on display 1

[4294703.002000] set current avs auto aspect to 16:9

[4294703.007000] disable wss on display 0

[4294703.011000] disable wss on display 1

[4294703.015000] set sb to 3(1)

[4294703.075000] VIDEO0: set blank to 0

[4294703.099000] VIDEO0: stop decode

[4294703.103000] VIDEO0: set blank to 0

[4294703.106000] no decoder left in sync handling so disable xpt_sync

[4294707.748000] 6079 ms: 25

[4294709.342000] 1590 ms: 26

[4294711.122000] 1778 ms: 27

[4294711.146000] 21 ms: =s

[4294711.275000] 126 ms: 33 Starting /etc/rcS.d/S10tpmd...

[4294711.301000] 21 ms: =s

de[4294711.714000] usbcore: registered new driver rt73

[4294711.963000] 

[4294711.965000]  _____     ____    _    ____

[4294711.969000] |__  /   _|  _ \  / \  / ___|

[4294711.974000]   / / | | | | | |/ _ \ \___ \

[4294711.978000]  / /| |_| | |_| / ___ \ ___) |

[4294711.982000] /____\__, |____/_/   \_\____/

[4294711.987000]      |___/

[4294711.989000] ZD1211B - version 2.22.0.0-development

[4294711.995000] usbcore: registered new driver zd1211b

[4294712.097000] 793 ms: 35 Starting /etc/rcS.d/S20modutils.sh...

[4294712.123000] 20 ms: =s

[4294712.201000] 76 ms: 37 Starting /etc/rcS.d/S38devpts.sh...

[4294712.228000] 21 ms: =s

[4294713.423000] 1191 ms: 39 Starting /etc/rcS.d/S40networking...

[4294713.450000] 21 ms: =s

[4294713.814000] 361 ms: 41 Starting /etc/rcS.d/S41rdate...

[4294713.841000] 21 ms: =s

[4294713.956000] 112 ms: 43 Starting /etc/rcS.d/S43portmap...


INIT: Entering runlevel: 3

Starting system message bus: dbus.
Starting Dropbear SSH server: dropbear.
Starting internet superserver: inetd.
Starting syslogd/klogd: done
* starting FTP Server: vsftpd... chown: unknown user ftp
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[ ok ]
 * Starting Avahi Unicast DNS Configuration Daemon: avahi-dnsconfd
[ ok ]
* starting eDaemon: eDaemon... done.
[SCRIPT] start: CCcam 2.2.1
[4294717.831000] VIDEO0: set blank to 0

[4294717.884000] sync is off so we enable it

[4294717.888000] playback!

[4294717.892000] total video delay: 0 (0 ms)

[4294718.003000] VIDEO0: start decode

[4294718.017000] flush video decoder

[4294718.070000] VIDEO0: first pts 0x0

[4294718.186000] VIDEO0: set blank to 0

[4294718.193000] VIDEO0: stop decode

[4294718.198000] VIDEO0: set blank to 0

[4294718.201000] no decoder left in sync handling so disable xpt_sync

setenv('prefix', '/usr', 0)
setenv('exec_prefix', '/usr', 0)
setenv('bindir', '/usr/bin', 0)
setenv('sbindir', '/usr/sbin', 0)
setenv('libexecdir', '/usr/libexec', 0)
setenv('datarootdir', '${prefix}/share', 0)
setenv('datadir', '/usr/share', 0)
setenv('sysconfdir', '/etc', 0)
setenv('sharedstatedir', '/com', 0)
setenv('localstatedir', '/var', 0)
setenv('libdir', '/usr/lib', 0)
setenv('localedir', '${datarootdir}/locale', 0)
setenv('prefix', '/usr', 1)
setenv('exec_prefix', '/usr', 1)
setenv('bindir', '/usr/bin', 1)
setenv('sbindir', '/usr/sbin', 1)
setenv('libexecdir', '/usr/libexec', 1)
setenv('datarootdir', '/usr/share', 1)
setenv('datadir', '/usr/share', 1)
setenv('sysconfdir', '/etc', 1)
setenv('sharedstatedir', '/com', 1)
setenv('localstatedir', '/var', 1)
setenv('libdir', '/usr/lib', 1)
setenv('localedir', '/usr/share/locale', 1)
resolve: resolve ${datadir}/enigma2/encoding.conf
resolve: -> /usr/share/enigma2/encoding.conf
resolve: resolve ${libdir}/enigma2/python
resolve: -> /usr/lib/enigma2/python
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (8) graphics acceleration manager
+ (9) GFBDC
16384k video mem
[4294722.187000] bcmfb: enable manual blit

[4294722.215000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)

 - double buffering available!
13144kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
+ (9) gLCDDC
lcd buffer 0x6b22f8 8448 bytes, stride 132
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox remote control (native)" is not a keyboard.
Input device "dreambox advanced remote control (native)" is not a keyboard.
Input device "dreambox ir keyboard" is a keyboard.
Input device "dreambox ir mouse" is not a keyboard.
Input device "dreambox front panel" is not a keyboard.
Found 5 input devices!
+ (21) Console RC Driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
cannot open /proc/stb/tsmux/input0
cannot open /proc/stb/tsmux/input1
done, found 0 common interface slots
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
resolve: resolve ${sysconfdir}/enigma2/lamedb
resolve: -> /etc/enigma2/lamedb
---- opening lame channel db
reading services (version 4)
loaded 1523 services
scanning for frontends..
opening frontend 0
detected satellite frontend
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 4 demux, boxtype 1
Use valid Linux Time :) (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
resolve: resolve ${datadir}/enigma2/skin_default/pal.png
resolve: -> /usr/share/enigma2/skin_default/pal.png
Loading spinners...
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait1.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait1.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait2.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait2.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait3.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait3.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait4.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait4.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait5.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait5.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait6.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait6.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait7.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait7.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait8.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait8.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait9.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait9.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait10.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait10.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait11.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait11.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait12.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait12.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait13.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!

executing main
setIoPrio best-effort level 3 ok
resolve: resolve ${libdir}/enigma2/python/mytest.py
resolve: -> /usr/lib/enigma2/python/mytest.py
main thread is non-idle! display spinner!
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${datadir}/fonts/
resolve: -> /usr/share/fonts/
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
resolve: resolve ${libdir}/enigma2/python/Plugins/
resolve: -> /usr/lib/enigma2/python/Plugins/
resolve: resolve ${datadir}/enigma2/po/
resolve: -> /usr/share/enigma2/po/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/share/enigma2/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/share/enigma2/
resolve: resolve ${sysconfdir}/enigma2/playlist/
resolve: -> /etc/enigma2/playlist/
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/share/enigma2/defaults/
resolve: resolve ${datadir}/enigma2/dealer
resolve: -> /usr/share/enigma2/dealer
resolve: resolve ${datadir}/meta
resolve: -> /usr/share/meta
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/share/enigma2/defaults/
[4294724.858000] 10896 ms: =s

[4294724.872000] 11 ms: 50 

[4294725.275000] 400 ms: 50 

[4294725.363000] 85 ms: 50 

[4294725.418000] 52 ms: 50 

[4294726.132000] alps_bsbe2 is in powersave mode now

main thread is non-idle! display spinner!
[4294726.931000] 1510 ms: 50 

couldn't open fp
enumerating block devices...
found block device 'mtdblock3': blacklisted
found block device 'mtdblock2': blacklisted
found block device 'mtdblock1': blacklisted
found block device 'mtdblock0': blacklisted
found block device 'sda': ok, removable=False, cdrom=False, partitions=['sda1']
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sda')
found block device 'sda1': error querying properties
[4294727.500000] 566 ms: 52 

not loading user skin:  [Errno 2] No such file or directory: '/etc/enigma2/skin_user.xml'
[4294728.359000] 856 ms: 53 

[4294728.659000] 298 ms: 54 

[4294728.685000] 24 ms: 54 

[4294728.692000] 4 ms: 54 

[4294728.699000] 4 ms: 54 

Preferred tag editor set to  None
[4294729.619000] 918 ms: 54 

[4294729.627000] 5 ms: 55 

[4294729.842000] 213 ms: 55 

[4294730.653000] 809 ms: 55 

Reading satellites.xml
resolve: resolve ${datadir}/enigma2/unicable.xml
resolve: -> /usr/share/enigma2/unicable.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr Alps BSBE2, need rotorworkaround Yes, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode:  diseqc_a_b
sec config completed
[4294736.100000] 5444 ms: 56 

[4294736.151000] 48 ms: 63 

[4294736.157000] 4 ms: 63 

[4294736.163000] 3 ms: 63 

[4294736.202000] 36 ms: 63 

[4294736.265000] 60 ms: 63 

resolve: resolve ${datadir}/enigma2/setup.xml
resolve: -> /usr/share/enigma2/setup.xml
[4294738.517000] 2250 ms: 63 

[4294738.526000] 6 ms: 65 

[4294738.558000] 29 ms: 65 

resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.tv
120 entries in Bouquet userbouquet.favourites.tv
1 entries in Bouquet bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet...[4294738.611000] 51 ms: 66 

 /etc/enigma2/bouquets.radio
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.radio
0 entries in Bouquet userbouquet.favourites.radio
1 entries in Bouquet bouquets.radio
[4294738.684000] 70 ms: 66 

[4294738.776000] 89 ms: 66 

[4294738.782000] 3 ms: 66 

[4294738.797000] 12 ms: 66 

[eDVBLocalTimeHandler] enable syn[4294738.823000] 24 ms: 66 

c local time with transponder time!
/usr/lib/python2.6/site-packages/twisted/internet/_sslverify.py:5: DeprecationWarning: the md5 module is deprecated; use hashlib instead
  import itertools, md5
[4294743.493000] 4668 ms: 66 

[4294743.505000] 9 ms: 71 

add dreampackage scanner plugin
added
[4294743.965000] 458 ms: 71 

[4294743.973000] 5 ms: 72 

[4294744.097000] 121 ms: 72 

[4294744.107000] 7 ms: 72 

[4294744.115000] 6 ms: 72 

[4294744.136000] 18 ms: 72 

[4294744.173000] 34 ms: 72 

[4294744.223000] 47 ms: 72 

[4294744.234000] 8 ms: 72 

[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Display)
[4294744.418000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)

 - double buffering available!
9184kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[4294745.114000] 877 ms: 72 

[4294745.277000] 160 ms: 73 

[4294745.331000] set current avs auto aspect to 4:3

[4294745.335000] disable wss on display 0

[4294745.339000] disable wss on display 1

[4294745.343000] set sb to 3(2)

[4294745.350000] set current avs auto aspect to 4:3

[4294745.355000] disable wss on display 0

[4294745.359000] disable wss on display 1

[4294745.363000] set sb to 3(2)

[4294745.372000] disable wss on display 0

[4294745.376000] set wss 8 on display 1

[4294745.413000] set input to 0

[4294745.416000] set fb to 2(0)

[4294745.419000] set current avs auto aspect to 4:3

[4294745.424000] disable wss on display 0

[4294745.427000] set wss 8 on display 1

[4294745.432000] set sb to 3(2)

[4294745.449000] set ac3 to downmix

--> setting scaler_sharpness to: 0000000D
[4294745.481000] 201 ms: 73 

[4294745.507000] 23 ms: 74 

couldn't open /proc/stb/misc/12V_output
resolve: resolve ${datadir}/enigma2/keymap.xml
resolve: -> /usr/share/enigma2/keymap.xml
[4294745.657000] 147 ms: 74 

[4294746.187000] 527 ms: 74 

[ePopen] command: ip -o addr show dev eth0
[4294746.277000] 88 ms: 74 

setLCDBrightness 25
setLCDBrightness 127
[4294746.339000] 59 ms: 75 

resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/share/keymaps/
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/share/keymaps/
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/share/keymaps/
Activating keymap: Keyboard English
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/share/keymaps/
[ePopen] command: loadkmap < /usr/share/keymaps/eng.kmap
Activating language German
language set to de_DE
[4294749.586000] 3245 ms: 75 

[4294749.604000] 15 ms: 78 

[4294749.626000] 19 ms: 78 

/usr/lib/enigma2/python/Plugins/Extensions/WebInterface/__init__.py:4: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
  import os, gettext, sha
[WebInterface] set language to  de
[WebInterface] set language to  de
[WebInterface] fallback to default translation for Webinterface
resolve: resolve ${libdir}/enigma2/python/Plugins/SystemPlugins/WirelessLan
resolve: -> /usr/lib/enigma2/python/Plugins/SystemPlugins/WirelessLan
getModeList for port DVI-PC
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI-PC
getModeList for port DVI
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[4294755.051000] set current avs auto aspect to 16:9

[4294755.056000] disable wss on display 0

[4294755.060000] set wss 7 on display 1

[4294755.063000] set sb to 3(1)

[4294755.190000] set current avs auto aspect to 16:9

[4294755.195000] disable wss on display 0

[4294755.199000] set wss 7 on display 1

[4294755.203000] set sb to 3(1)

[4294755.209000] disable wss on display 0

[4294755.214000] set wss 7 on display 1

[4294755.221000] set current avs auto aspect to 16:9

[4294755.226000] disable wss on display 0

[4294755.230000] set wss 7 on display 1

[4294755.234000] set sb to 3(1)

-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[4294755.255000] set current avs auto aspect to 16:9

[4294755.260000] disable wss on display 0

[4294755.264000] set wss 7 on display 1

[4294755.268000] set sb to 3(1)

[4294755.276000] set current avs auto aspect to 16:9

[4294755.281000] disable wss on display 0

[4294755.285000] set wss 7 on display 1

[4294755.288000] set sb to 3(1)

[4294755.296000] disable wss on display 0

[4294755.299000] set wss 7 on display 1

[4294755.306000] set current avs auto aspect to 16:9

[4294755.312000] disable wss on display 0

[4294755.316000] set wss 7 on display 1

[4294755.320000] set sb to 3(1)

-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[4294755.339000] set current avs auto aspect to 16:9

[4294755.344000] disable wss on display 0

[4294755.348000] set wss 7 on display 1

[4294755.352000] set sb to 3(1)

[4294755.362000] set current avs auto aspect to 16:9

[4294755.367000] disable wss on display 0

[4294755.372000] set wss 7 on display 1

[4294755.376000] set sb to 3(1)

[4294755.383000] disable wss on display 0

[4294755.387000] set wss 7 on display 1

[4294755.395000] set current avs auto aspect to 16:9

[4294755.400000] disable wss on display 0

[4294755.403000] set wss 7 on display 1

[4294755.407000] set sb to 3(1)

-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[4294755.424000] set current avs auto aspect to 16:9

[4294755.429000] disable wss on display 0

[4294755.433000] set wss 7 on display 1

[4294755.437000] set sb to 3(1)

[4294755.444000] set current avs auto aspect to 16:9

[4294755.448000] disable wss on display 0

[4294755.453000] set wss 7 on display 1

[4294755.457000] set sb to 3(1)

[4294755.467000] disable wss on display 0

[4294755.472000] set wss 7 on display 1

[4294755.479000] set current avs auto aspect to 16:9

[4294755.484000] disable wss on display 0

[4294755.488000] set wss 7 on display 1

[4294755.493000] set sb to 3(1)

setMode - port: DVI mode: 1080i rate: 50Hz
[4294755.508000] set current avs auto aspect to 16:9

[4294755.513000] disable wss on display 0

[4294755.517000] set wss 7 on display 1

[4294755.521000] set sb to 3(1)

[4294755.528000] set current avs auto aspect to 16:9

[4294755.534000] disable wss on display 0

[4294755.537000] set wss 7 on display 1

[4294755.541000] set sb to 3(1)

-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[4294755.559000] set current avs auto aspect to 16:9

[4294755.564000] disable wss on display 0

[4294755.568000] set wss 7 on display 1

[4294755.573000] set sb to 3(1)

[4294755.583000] set current avs auto aspect to 16:9

[4294755.588000] disable wss on display 0

[4294755.593000] set wss 7 on display 1

[4294755.597000] set sb to 3(1)

[4294755.605000] disable wss on display 0

[4294755.609000] set wss 7 on display 1

[4294755.617000] set current avs auto aspect to 16:9

[4294755.621000] disable wss on display 0

[4294755.625000] set wss 7 on display 1

[4294755.629000] set sb to 3(1)

resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/share/enigma2/
getFPVersion failed!
sh: fpupgrade: not found
/usr/lib/python2.6/site-packages/twisted/mail/smtp.py:10: DeprecationWarning: the MimeWriter module is deprecated; use the email package instead
  import MimeWriter, tempfile, rfc822
[4294756.836000] JFFS2 notice: (628) check_node_data: wrong data CRC in data node at 0x0043ce00: read 0x7fa3e480, calculated 0xdd72df04.

--> setting contrast to: 00008000
--> setting saturation to: 00008000
--> setting hue to: 00008000
--> setting brightness to: 00008000
--> setting block_noise_reduction to: 00000000
--> setting mosquito_noise_reduction to: 00000000
--> setting digital_contour_removal to: 00000000
--> applying pep values
[getMountedPartitions] Step 1/3: got Harddisk mountet on /media/hdd
[getMountedPartitions] Step 2/3: /media/hdd is writeable. Append Harddisk to my part list
[getMountedPartitions] Step 1/3: got Internal Flash mountet on /
[getMountedPartitions] Step 2/3: / is writeable. Append Internal Flash to my part list
[getMountedPartitions] Step 3/3: parts are available. return part list to getmountedpart
[getMountedPartitions] Step 1/3: got Harddisk mountet on /media/hdd
[getMountedPartitions] Step 2/3: /media/hdd is writeable. Append Harddisk to my part list
[getMountedPartitions] Step 1/3: got Internal Flash mountet on /
[getMountedPartitions] Step 2/3: / is writeable. Append Internal Flash to my part list
[getMountedPartitions] Step 3/3: parts are available. return part list to getmountedpart
[getMountedPartitions] Step 1/3: got Harddisk mountet on /media/hdd
[getMountedPartitions] Step 2/3: /media/hdd is writeable. Append Harddisk to my part list
[getMountedPartitions] Step 1/3: got Internal Flash mountet on /
[getMountedPartitions] Step 2/3: / is writeable. Append Internal Flash to my part list
[getMountedPartitions] Step 3/3: parts are available. return part list to getmountedpart
[getMountedPartitions] Step 1/3: got Harddisk mountet on /media/hdd
[getMountedPartitions] Step 2/3: /media/hdd is writeable. Append Harddisk to my part list
[getMountedPartitions] Step 1/3: got Internal Flash mountet on /
[getMountedPartitions] Step 2/3: / is writeable. Append Internal Flash to my part list
[getMountedPartitions] Step 3/3: parts are available. return part list to getmountedpart
[OSD preference] found: /usr/share/enigma2/newnigma2-HD/icons/beta_g.png
[OSD preference] append "icon" option to list
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (LCD_NN)
[eCamdCtrl] starting cmd 5
[eCamdCtrl] executing /usr/bin/camdctrl current
starting hotplug handler
[CrashlogAutoSubmit] - autostart
[4294763.367000] 13738 ms: 78 

It's now  Sun Aug 21 18:32:35 2011
[timer.py] next activation: 1313944455 (in 99422 ms)
wasTimerWakeup failed!
It's now  Sun Aug 21 18:32:35 2011
[timer.py] next activation: 1313944455 (in 99405 ms)
Looking for embedded skin
port changed to DVI
mode changed to 1080i
getModeList for port DVI
default ('1080i', 'Standard')
preferedmodes ['720p', '576p', '480p', '576i', '480i', ('1080i', 'Standard')]
[CrashlogAutoSubmit] - autostart
[CrashlogAutoSubmit] - getMailExchange
[CamdresetEveryDay] next reset: Sun Aug 21 23:45:36 2011 
No skin to read...
[InstallerUpdateCheck] timer changed
[InstallerUpdateCheck] next check at  Sun Aug 28 18:32:37 2011
[InstallerUpdateCheck] Check...
Looking for embedded skin
[Toplevel.importExternalModules] Could NOT import external module: AutoTimer
[Toplevel.importExternalModules] Exception Caught
No module named AutoTimer.AutoTimerResource
[Toplevel.importExternalModules] Could NOT import external module: EPGRefresh
[Toplevel.importExternalModules] Exception Caught
No module named EPGRefresh.EPGRefreshResource
[Toplevel.importExternalModules] Imported external module: Example
[WebInterface] checking for SSL Certificates
[Webinterface] started on 0.0.0.0:80 auth=False ssl=False
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[Webinterface] started on 0.0.0.0:443 auth=True ssl=True
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[4294767.292000] 3921 ms: 94 

[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[EPGC] time updated.. start EPG Mainloop
before: 1
after: 1
not showing fine-tuning wizard, config variable doesn't exist
showtestcard is false
Looking for embedded skin
[4294767.455000] 160 ms: 99 

setValue 50
[4294767.695000] set mute 0 (000) 1

cannot open /proc/stb/audio/j1_mute(No such file [4294767.703000] 246 ms: 99 

or directory)
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 50 50 (raw)
Setvolume: 32 32 (-1db)
[4294767.745000] 39 ms: 99 

nr_read 43 nr_write 7
sum 50 prev_sum 0
hdd was accessed since previous check!
[IDLE] 0 60 False
nr_read 43 nr_write 7
sum 50 prev_sum 50
hdd IDLE!
[IDLE] 0.0202779769897 60 False
nr_read 43 nr_write 7
sum 50 prev_sum 50
hdd IDLE!
[IDLE] 0.0404191017151 60 False
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
RemovePopup, id = ZapError
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
main thread is non-idle! display spinner!
[EPGC] 1330 events read from /hdd/epg.dat
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 134941 bytes for cache used
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
playing 1:0:1:7034:41B:1:C00000:0:0:0:
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 041b:0001
opening frontend 0
[4294771.287000] alps_bsbe2 is in normal mode now

[eDVBCAService] new channel 0x1a91520!
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 10744000 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 994 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:7034:41B:1:C00000:0:0:0:
allocate demux
resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
resolve: -> /etc/scan_tp_valid_check.py
nr_read 55 nr_write 11
sum 66 prev_sum 50
hdd was accessed since previous check!
[IDLE] 0 60 False
[SEC] set static current limiting
set sequence pos 3
set sequence pos 4
[SEC] setVoltage 2
[SEC] sleep 200ms
child has terminated
pipes closed
child has terminated
pipes closed
[ePopen] command: route -n | grep  eth0
poll: unhandled POLLERR/HUP/NVAL for fd 27(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
poll: unhandled POLLERR/HUP/NVAL for fd 32(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 39(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 56(16)
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
got unsupported system from frontend! report as DVBS!
[SEC] sleep 50ms
child has terminated
pipes closed
192.168
169.254
0.0.0.0
nameservers: [[192, 168, 1, 1]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1], 'address': [192, 168, 1, 5]}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 5], 'up': True, 'mac': '00:09:34:2a:2a:45', 'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
poll: unhandled POLLERR/HUP/NVAL for fd 29(16)
[CrashlogAutoSubmit] gotMXServer:  82.149.226.184
[CrashlogAutoSubmit] - mxServerFound --> 82.149.226.184
[CrashlogAutoSubmit] - no crashlogs found.
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f2
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1, inversion off, m_tuning 2
(0)fe event: status 3, inversion off, m_tuning 3
(0)fe event: status 1f, inversion off, m_tuning 4
OURSTATE: ok
[eDVBCAService] channel 0x1a91520 running
[eDVBLocalTimerHandler] channel 0x1a91520 running
no version filtering
0014:  70 00 00 00 00 00
mask:  fc 00 00 00 00 00
mode:  00 00 00 00 00 00
[eEPGCache] channel 0x1a91520 running
stop release channel timer
no version filtering
0012:  4e 70 34 00 00 00
mask:  ff ff ff 00 00 00
mode:  00 00 00 00 00 00
[EPGC] next update in 2 sec
ok ... now we start!!
no version filtering
0000:  00 00 00 00 00 00
mask:  ff 00 00 00 00 00
mode:  00 00 00 00 00 00
eventNewProgramInfo 0 0
have 1 video stream(s) (0191), and 1 audio stream(s) (0192), and the pcr[4294773.729000] start pcr0 on dmx 0 pid:191 index 5

 pid is 0191, and the text pid is 0194
allocate[4294773.738000] start audio on dmx 0 pid:192

 d[4294773.742000] audio xpt start

em[4294773.745000] sync is off so we enable it

ux
disable [4294773.750000] demux-index 0 pcr0pid 191

t[4294773.754000] using 5 as pcr0 pidchannel

eletext subtitles
decoder state: play,[4294773.762000] MPEG

 vp[4294773.764000] audio: streamtype set 0

i[4294773.768000] audio: streamtype_set: stop rave

d=401, apid=402
DMX_SET_PES_FILTER(0x191) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x192) - audio - ok
DEMUX_START -[4294773.784000] audio: streamtype_set: restart rave

 a[4294773.789000] set mute 0 (111) 1

udio - ok
AUDIO_SET_BYPASS(1) - ok
AUD[4294773.797000] audio: decoder start 2

IO_PAUSE - ok
AUDIO_PLAY - [4294773.815000] video delay 0 (0 ms)

[4294773.818000] total video delay: 0 (0 ms)

ok
Video Device: /dev/dvb/ad[4294773.827000] start video0 on dmx 0 pid:191

apter0/video0
[4294773.832000] total video delay: 0 (0 ms)

demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x191) - video - ok
DEM[4294773.847000] VIDEO0: start decode

U[4294773.850000] ch0: lock

X_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x194) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE -[4294773.870000] RAP first pts 0x1bb9870c0, stc 0x1bb985530, pcr valid

 ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
not pauseable.
[AutoRes] service changed
[4294774.198000] RAP sampling rate info isr

[4294774.202000] eBitRateChange Isr.. set source_changed_event!

[4294774.208000] eModeChange Isr.. set source_changed_event!

[4294774.290000] VIDEO0: first pts 0x1bb990ce2

[4294774.294000] VIDEO0: resolution changed (720 576)

[SEC] set dynamic current limiting
[eDVBLocalTimerHandler] diff is -1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 18:32:45
[eDVBLocalTimerHandler] m_time_difference is -1
[eDVBLocalTimerHandler] set Linux Time
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 134941 bytes for cache used
-+ 1/2 TID 4e
+ 1/1 TID 00
done!
PATready
use pmtpid 0190 for service_id 7034
no version filtering
0190:  02 70 34 00 00 00
mask:  ff ff ff 00 0[4294774.451000] enable tsm0

0 00
mode:  00 00 00 00 00 00
doing version filtering
0000:  00 00 00 09 00 00
mask:  ff 00 00 3f 00 00
mode:  00 00 00 3e 00 00
VIDEO_GET_EVENT - ok
[AutoRes] got event evVideoSizeChanged
[4294774.850000] VIDEO0: progressive changed (0)

+ 1/1 TID 02
done!
eventNewProgramInfo 0 0
have 1 video stream(s) (0191), and 2 audio stream(s) (0192, 0193), and the pcr pid is 0191, and the text pid is 0194
decoder state: play, vpid=401, apid=402
[eDVBCAService] new service 1:0:1:7034:41B:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:7034:41B:1:C00000:0:0:0:
[eDVBCIInterfaces] gotPMT
demux 0 mask 01 prevhash 00000000
[eDVBCAService] send 59 bytes
9f 80 32 37 03 70 34 29 00 13 01 81 08 00 c0 00 00 04 1b 00 01 82 02 01 00 84 02 01 90 02 01 91 00 00 03 01 92 00 00 03 01 93 00 00 06 01 94 00 00 05 01 d6 00 00 0b 08 7b 00 00 
doing version filtering
0190:  02 70 34 29 00 00
mask:  ff ff ff 3f 00 00
mode:  00 00 00A 3e 00 00
++ 2/2 TID 4e
done!
doing version filtering
0012:  4e 70 34 3b 00 00
mask:  ff ff ff 3f 00 00
mode:  00 00 00 3e 00 00
VIDEO_GET_EVENT - ok
[AutoRes] got event evFramerateChanged
[AutoRes] determineContent[EPGC] start caching events(1313944366)

nr_read 59 nr_write 11
sum 70 prev_sum 66
hdd was accessed since previous check!
[IDLE] 0 60 False
child has terminated
pipes closed
[InstallerUpdateCheck] No updates available
[InstallerUpdateCheck] next check at  Sun Aug 28 18:32:47 2011
poll: unhandled POLLERR/HUP/NVAL for fd 31(16)
VIDEO_GET_EVENT - ok
[AutoRes] got event evVideoProgressiveChanged
sdt update done!
[AutoRes] determineContent
action ->  InfobarMenuActions mainMenu
loading mainmenu XML...
TimerEdit TimerEditList
PluginBrowser PluginBrowser
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
action ->  OkCancelActions ok
okbuttonClick
ParentalControlSetup ParentalControlSetup
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
nr_read 59 nr_write 13
sum 72 prev_sum 70
hdd was accessed since previous check!
[IDLE] 0 60 False
action ->  OkCancelActions ok
okbuttonClick
Satconfig NimSelection
ScanSetup DefaultSatLists
ScanSetup ScanSimple
ScanSetup ScanSetup
allocating new converter!
allocating new converter!
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail viasat reading
[EPGC] abort non avail mhw reading
action ->  OkCancelActions ok
okbuttonClick
nim 0 provides [(192, 'Astra (19.2E)', 1), (130, 'Hotbird (13.0E)', 0)]
known: []
(192, 'Astra (19.2E)', 1) not in  []
(130, 'Hotbird (13.0E)', 0) not in  [(192, 'Astra (19.2E)', 1)]
[EPGC] nownext finished(1313944376)
action ->  SetupActions ok
stopService
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:7034:41B:1:C00000:0:0:0:
[eDVBCAService] free service 1:0:1:7034:41B:1:C00000:0:0:0:
decoder s[4294785.594000] stop pcr0 on dmx 0 pid:191

tate: play, vpid=-1, apid=-1[4294785.600000] stop video0 on dmx 0 pid:191


DEMUX_STOP - pcr - ok
D[4294785.607000] VIDEO0: stop decode

EMUX_STOP - video - ok
V[4294785.613000] VIDEO0: set blank to 1

IDEO_STOP - ok
AUDIO[4294785.619000] audio: decoder stop

_STOP - ok
[4294785.635000] stop audio on dmx 0 pid:192

D[4294785.640000] audio: xpt stop(3)

EM[4294785.643000] no decoder left in sync handling so disable xpt_sync

UX_[4294785.650000] bcm_audio_channel_stop(3) done

STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
allocating new converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
ServiceScanCreateSummary
[eDVBCAService] remove channel 0x1a91520
[eDVBLocalTimerHandler] remove channel 0x1a91520
[eEPGCache] remove channel 0x1a91520
[EPGC] abort caching events !!
allocate demux
resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
resolve: -> /etc/scan_tp_valid_check.py
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 10744000 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 994 mhz
OURSTATE: tuning
[SEC] set static current limiting
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1, inversion off, m_tuning 2
(0)fe event: status 3, inversion off, m_tuning 3
(0)fe event: status 1f, inversion off, m_tuning 4
OURSTATE: ok
no version filtering
0000:  00 00 00 00 00 00
mask:  ff 00 00 00 00 00
mode:  00 00 00 00 00 00
no version filtering
0010:  40 00 00 00 00 00
mask:  ff 00 00 00 00 00
mode:  00 00 00 00 00 00
+ 1/1 TID 00
done!
got pat
got pmt -2
no version filtering
0064:  02 70 31 00 00 00
mask:  ff ff ff 00 00 00
mode:  00 00 00 00 00 00
no version filtering
0011:  42 04 1b 00 00 00
mask:  fb ff ff 00 00 00
mode:  00 00 00 00 00 00
+ 1/1 TID 02
done!
got pmt 0
no version filtering
00c8:  02 70 32 00 00 00
mask:  ff ff ff 00 00 00
mode:  00 00 00 00 00 00
[SEC] set dynamic current limiting
+ 1/1 TID 02
done!
got pmt 0
no version filtering
012c:  02 70 33 00 00 00
mask:  ff ff ff 00 00 00
mode:  00 00 00 00 00 00
+ 1/1 TID 02
done!
got pmt 0
no version filtering
0190:  02 70 34 00 00 00
mask:  ff ff ff 00 00 00
mode:  00 00 00 00 00 00
+ 1/1 TID 02
done!
got pmt 0
no version filtering
01f4:  02 70 35 00 00 00
mask:  ff ff ff 00 00 00
mode:  00 00 00 00 00 00
+ 1/1 TID 02
done!
got pmt 0
no version filtering
0258:  02 70 36 00 00 00
mask:  ff ff ff 00 00 00
mode:  00 00 00 00 00 00
+ 1/1 TID 02
done!
got pmt 0
+ 1/1 TID 42
done!
got sdt 0
SDT: 
ONID: 0001
SID 7031: name 'EinsExtra', provider_name 'ARD'
SID 7032: name 'Einsfestival', provider_name 'ARD'
SID 7033: name 'EinsPlus', provider_name 'ARD'
SID 7034: name 'arte', provider_name 'ARD'
SID 7035: name 'Phoenix', provider_name 'ARD'
SID 7036: name 'Test-R', provider_name 'ARD'
nr_read 59 nr_write 13
sum 72 prev_sum 72
hdd IDLE!
[IDLE] 5.99994397163 60 False
-+ 1/2 TID 40
nr_read 59 nr_write 13
sum 72 prev_sum 72
hdd IDLE!
[IDLE] 11.9999711514 60 False
++ 2/2 TID 40
done!
got nit, err 0
dumping NIT
TSID: 0002 ONID: 0085
SAT DVB-S freq 11797500, vert, pos 192, sr 27500000, fec 3
try to add 192 11797500 27500000 0 3 1
update
already in todo list
TSID: 0003 ONID: 0085
SAT DVB-S freq 11719500, vert, pos 192, sr 27500000, fec 3
try to add 192 11719500 27500000 0 3 1
update
already in todo list
TSID: 0004 ONID: 0085
SAT DVB-S freq 12031500, vert, pos 192, sr 27500000, fec 3
try to add 192 12031500 27500000 0 3 1
update
already in todo list
TSID: 0001 ONID: 0085
SAT DVB-S freq 12070500, vert, pos 192, sr 27500000, fec 3
try to add 192 12070500 27500000 0 3 1
update
already in todo list
TSID: 0011 ONID: 0085
SAT DVB-S freq 11758500, vert, pos 192, sr 27500000, fec 3
try to add 192 11758500 27500000 0 3 1
update
already in todo list
TSID: 0006 ONID: 0085
SAT DVB-S2 freq 11914500, vert, pos 192, sr 27500000, fec 9, modulation 1, rolloff 0
try to add 192 11914500 27500000 0 9 1
update
already in todo list
TSID: 000d ONID: 0085
SAT DVB-S2 freq 11992500, vert, pos 192, sr 27500000, fec 9, modulation 1, rolloff 0
try to add 192 11992500 27500000 0 9 1
update
already in todo list
TSID: 000c ONID: 0085
SAT DVB-S2 freq 12304500, vert, pos 192, sr 27500000, fec 9, modulation 1, rolloff 0
try to add 192 12304500 27500000 0 9 1
update
already in todo list
TSID: 000b ONID: 0085
SAT DVB-S2 freq 12382500, vert, pos 192, sr 27500000, fec 9, modulation 1, rolloff 0
try to add 192 12382500 27500000 0 9 1
update
already in todo list
TSID: 000f ONID: 0085
SAT DVB-S freq 10920750, vert, pos 192, sr 22000000, fec 5
try to add 192 10920750 22000000 0 5 1
update
already in todo list
TSID: 0007 ONID: 0085
SAT DVB-S freq 12148500, vert, pos 192, sr 27500000, fec 3
try to add 192 12148500 27500000 0 3 1
update
already in todo list
TSID: 0005 ONID: 0085
SAT DVB-S freq 12460500, vert, pos 192, sr 27500000, fec 3
try to add 192 12460500 27500000 0 3 1
update
already in todo list
TSID: 0021 ONID: 0085
SAT DVB-S freq 12480000, hor, pos 192, sr 27500000, fec 3
try to add 192 12480000 27500000 1 3 1
update
already in todo list
TSID: 000e ONID: 0085
SAT DVB-S2 freq 11875500, vert, pos 192, sr 27500000, fec 9, modulation 1, rolloff 0
try to add 192 11875500 27500000 0 9 1
update
already in todo list
TSID: 0453 ONID: 0001
SAT DVB-S freq 12544750, vert, pos 192, sr 22000000, fec 4
try to add 192 12544750 22000000 0 4 1
update
already in todo list
TSID: 043a ONID: 0001
SAT DVB-S freq 12051000, hor, pos 192, sr 27500000, fec 3
try to add 192 12051000 27500000 1 3 1
update
already in todo list
TSID: 03f9 ONID: 0001
SAT DVB-S2 freq 11464250, vert, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 11464250 22000000 0 2 2
update
already in todo list
TSID: 0421 ONID: 0001
SAT DVB-S2 freq 10832250, vert, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 10832250 22000000 0 2 2
update
already in todo list
TSID: 041d ONID: 0001
SAT DVB-S2 freq 10773250, vert, pos 192, sr 22000000, fec 3, modulation 2, rolloff 2
try to add 192 10773250 22000000 0 3 2
update
already in todo list
TSID: 0444 ONID: 0001
SAT DVB-S freq 12246000, hor, pos 192, sr 27500000, fec 3
try to add 192 12246000 27500000 1 3 1
update
already in todo list
TSID: 03f8 ONID: 0001
SAT DVB-S2 freq 11435500, hor, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 11435500 22000000 1 2 2
update
already in todo list
TSID: 0400 ONID: 0001
SAT DVB-S freq 11567500, hor, pos 192, sr 22000000, fec 4
try to add 192 11567500 22000000 1 4 1
update
already in todo list
TSID: 042a ONID: 0001
SAT DVB-S freq 11739000, hor, pos 192, sr 27500000, fec 3
try to add 192 11739000 27500000 1 3 1
update
already in todo list
TSID: 042c ONID: 0001
SAT DVB-S freq 11778000, hor, pos 192, sr 27500000, fec 3
try to add 192 11778000 27500000 1 3 1
update
already in todo list
TSID: 042e ONID: 0001
SAT DVB-S freq 11817000, hor, pos 192, sr 27500000, fec 3
try to add 192 11817000 27500000 1 3 1
update
already in todo list
TSID: 0459 ONID: 0001
SAT DVB-S freq 12633250, vert, pos 192, sr 22000000, fec 4
try to add 192 12633250 22000000 0 4 1
update
already in todo list
TSID: 0432 ONID: 0001
SAT DVB-S freq 11895000, hor, pos 192, sr 27500000, fec 3
try to add 192 11895000 27500000 1 3 1
update
already in todo list
TSID: 0434 ONID: 0001
SAT DVB-S freq 11934000, hor, pos 192, sr 27500000, fec 3
try to add 192 11934000 27500000 1 3 1
update
already in todo list
TSID: 0436 ONID: 0001
SAT DVB-S freq 11973000, hor, pos 192, sr 27500000, fec 3
try to add 192 11973000 27500000 1 3 1
update
already in todo list
TSID: 0437 ONID: 0001
SAT DVB-S freq 11953500, vert, pos 192, sr 27500000, fec 3
try to add 192 11953500 27500000 0 3 1
update
already in todo list
TSID: 0438 ONID: 0001
SAT DVB-S2 freq 12012000, hor, pos 192, sr 27500000, fec 2, modulation 2, rolloff 0
try to add 192 12012000 27500000 1 2 2
update
already in todo list
TSID: 043e ONID: 0001
SAT DVB-S freq 12129000, hor, pos 192, sr 27500000, fec 3
try to add 192 12129000 27500000 1 3 1
update
already in todo list
TSID: 0441 ONID: 0001
SAT DVB-S freq 12187500, vert, pos 192, sr 27500000, fec 3
try to add 192 12187500 27500000 0 3 1
update
already in todo list
TSID: 0423 ONID: 0001
SAT DVB-S freq 10861750, vert, pos 192, sr 22000000, fec 5
try to add 192 10861750 22000000 0 5 1
update
already in todo list
TSID: 0442 ONID: 0001
SAT DVB-S2 freq 12207000, hor, pos 192, sr 27500000, fec 2, modulation 2, rolloff 0
try to add 192 12207000 27500000 1 2 2
update
already in todo list
TSID: 0443 ONID: 0001
SAT DVB-S freq 12226500, vert, pos 192, sr 27500000, fec 3
try to add 192 12226500 27500000 0 3 1
update
already in todo list
TSID: 0446 ONID: 0001
SAT DVB-S freq 12285000, hor, pos 192, sr 27500000, fec 3
try to add 192 12285000 27500000 1 3 1
update
already in todo list
TSID: 0448 ONID: 0001
SAT DVB-S freq 12324000, hor, pos 192, sr 27500000, fec 3
try to add 192 12324000 27500000 1 3 1
update
already in todo list
TSID: 0449 ONID: 0035
SAT DVB-S freq 12343500, vert, pos 192, sr 27500000, fec 3
try to add 192 12343500 27500000 0 3 1
update
already in todo list
TSID: 044a ONID: 0001
SAT DVB-S freq 12363000, hor, pos 192, sr 27500000, fec 3
try to add 192 12363000 27500000 1 3 1
update
already in todo list
TSID: 044d ONID: 0001
SAT DVB-S freq 11836500, vert, pos 192, sr 27500000, fec 3
try to add 192 11836500 27500000 0 3 1
update
already in todo list
TSID: 04b1 ONID: 0001
SAT DVB-S freq 12421500, vert, pos 192, sr 27500000, fec 3
try to add 192 12421500 27500000 0 3 1
update
already in todo list
TSID: 044c ONID: 0001
SAT DVB-S freq 12402000, hor, pos 192, sr 27500000, fec 3
try to add 192 12402000 27500000 1 3 1
update
already in todo list
TSID: 0451 ONID: 0035
SAT DVB-S freq 12515250, vert, pos 192, sr 22000000, fec 4
try to add 192 12515250 22000000 0 4 1
update
already in todo list
TSID: 0454 ONID: 0001
SAT DVB-S freq 12551500, hor, pos 192, sr 22000000, fec 4
try to add 192 12551500 22000000 1 4 1
update
already in todo list
TSID: 0457 ONID: 0001
SAT DVB-S freq 12603750, vert, pos 192, sr 22000000, fec 4
try to add 192 12603750 22000000 0 4 1
update
already in todo list
TSID: 03f0 ONID: 0001
SAT DVB-S freq 11317500, hor, pos 192, sr 22000000, fec 4
try to add 192 11317500 22000000 1 4 1
update
already in todo list
TSID: 0402 ONID: 0001
SAT DVB-S freq 11597000, hor, pos 192, sr 22000000, fec 4
try to add 192 11597000 22000000 1 4 1
update
already in todo list
TSID: 040e ONID: 0001
SAT DVB-S freq 11038000, hor, pos 192, sr 22000000, fec 4
try to add 192 11038000 22000000 1 4 1
update
already in todo list
TSID: 0416 ONID: 0001
SAT DVB-S freq 11156000, hor, pos 192, sr 22000000, fec 4
try to add 192 11156000 22000000 1 4 1
update
already in todo list
TSID: 045d ONID: 0001
SAT DVB-S freq 12692250, vert, pos 192, sr 22000000, fec 4
try to add 192 12692250 22000000 0 4 1
update
already in todo list
TSID: 045a ONID: 0001
SAT DVB-S freq 12640000, hor, pos 192, sr 22000000, fec 4
try to add 192 12640000 22000000 1 4 1
update
already in todo list
TSID: 0408 ONID: 0001
SAT DVB-S freq 11685500, hor, pos 192, sr 22000000, fec 4
try to add 192 11685500 22000000 1 4 1
update
already in todo list
TSID: 0456 ONID: 0001
SAT DVB-S2 freq 12581000, hor, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 12581000 22000000 1 2 2
update
already in todo list
TSID: 040a ONID: 0001
SAT DVB-S freq 10979000, hor, pos 192, sr 22000000, fec 4
try to add 192 10979000 22000000 1 4 1
update
already in todo list
TSID: 0424 ONID: 0001
SAT DVB-S freq 10876500, hor, pos 192, sr 22000000, fec 4
try to add 192 10876500 22000000 1 4 1
update
already in todo list
TSID: 0430 ONID: 0001
SAT DVB-S freq 11856000, hor, pos 192, sr 27500000, fec 3
try to add 192 11856000 27500000 1 3 1
update
already in todo list
TSID: 0412 ONID: 0001
SAT DVB-S freq 11097000, hor, pos 192, sr 22000000, fec 4
try to add 192 11097000 22000000 1 4 1
update
already in todo list
TSID: 041e ONID: 0001
SAT DVB-S freq 10788000, hor, pos 192, sr 22000000, fec 4
try to add 192 10788000 22000000 1 4 1
update
already in todo list
TSID: 03fc ONID: 0001
SAT DVB-S freq 11508500, hor, pos 192, sr 22000000, fec 4
try to add 192 11508500 22000000 1 4 1
update
already in todo list
TSID: 0422 ONID: 0001
SAT DVB-S freq 10847000, hor, pos 192, sr 22000000, fec 4
try to add 192 10847000 22000000 1 4 1
update
already in todo list
TSID: 0420 ONID: 0001
SAT DVB-S2 freq 10817500, hor, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 10817500 22000000 1 2 2
update
already in todo list
TSID: 045b ONID: 0001
SAT DVB-S freq 12662750, vert, pos 192, sr 22000000, fec 4
try to add 192 12662750 22000000 0 4 1
update
already in todo list
TSID: 03fa ONID: 0001
SAT DVB-S freq 11479000, hor, pos 192, sr 22000000, fec 4
try to add 192 11479000 22000000 1 4 1
update
already in todo list
TSID: 0445 ONID: 0001
SAT DVB-S freq 12265500, vert, pos 192, sr 27500000, fec 3
try to add 192 12265500 27500000 0 3 1
update
already in todo list
TSID: 0452 ONID: 0001
SAT DVB-S freq 12522000, hor, pos 192, sr 22000000, fec 4
try to add 192 12522000 22000000 1 4 1
update
already in todo list
TSID: 03fe ONID: 0001
SAT DVB-S freq 11538000, hor, pos 192, sr 22000000, fec 4
try to add 192 11538000 22000000 1 4 1
update
already in todo list
TSID: 044e ONID: 0001
SAT DVB-S2 freq 12441000, hor, pos 192, sr 29700000, fec 2, modulation 2, rolloff 1
try to add 192 12441000 29700000 1 2 2
really add
TSID: 043c ONID: 0001
SAT DVB-S freq 12090000, hor, pos 192, sr 27500000, fec 3
try to add 192 12090000 27500000 1 3 1
update
already in todo list
TSID: 0440 ONID: 0001
SAT DVB-S freq 12168000, hor, pos 192, sr 27500000, fec 3
try to add 192 12168000 27500000 1 3 1
update
already in todo list
TSID: 0431 ONID: 0001
SAT DVB-S freq 12109500, vert, pos 192, sr 27500000, fec 3
try to add 192 12109500 27500000 0 3 1
update
already in todo list
TSID: 0458 ONID: 0001
SAT DVB-S freq 12610500, hor, pos 192, sr 22000000, fec 4
try to add 192 12610500 22000000 1 4 1
update
already in todo list
TSID: 045e ONID: 0001
SAT DVB-S freq 12699000, hor, pos 192, sr 22000000, fec 4
try to add 192 12699000 22000000 1 4 1
update
already in todo list
TSID: 0460 ONID: 0001
SAT DVB-S freq 12728500, hor, pos 192, sr 22000000, fec 4
try to add 192 12728500 22000000 1 4 1
update
already in todo list
TSID: 041b ONID: 0001
SAT DVB-S freq 10743750, vert, pos 192, sr 22000000, fec 4
try to add 192 10743750 22000000 0 4 1
is current
TSID: 045f ONID: 0001
SAT DVB-S freq 12721750, vert, pos 192, sr 22000000, fec 4
try to add 192 12721750 22000000 0 4 1
update
already in todo list
TSID: 03f3 ONID: 0001
SAT DVB-S2 freq 11361750, vert, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 11361750 22000000 0 2 2
update
already in todo list
TSID: 0417 ONID: 0001
SAT DVB-S2 freq 11170750, vert, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 11170750 22000000 0 2 2
update
already in todo list
TSID: 03ef ONID: 0001
SAT DVB-S2 freq 11302750, vert, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 11302750 22000000 0 2 2
update
already in todo list
TSID: 045c ONID: 0001
SAT DVB-S2 freq 12669500, hor, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 12669500 22000000 1 2 2
update
already in todo list
TSID: 0404 ONID: 0001
SAT DVB-S freq 11626500, hor, pos 192, sr 22000000, fec 4
try to add 192 11626500 22000000 1 4 1
update
already in todo list
TSID: 041a ONID: 0001
SAT DVB-S2 freq 10729000, hor, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 10729000 22000000 1 2 2
update
already in todo list
TSID: 0428 ONID: 0001
SAT DVB-S2 freq 10935500, hor, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 10935500 22000000 1 2 2
really add
TSID: 040d ONID: 0001
SAT DVB-S freq 11023250, vert, pos 192, sr 22000000, fec 4
try to add 192 11023250 22000000 0 4 1
update
already in todo list
TSID: 0414 ONID: 0001
SAT DVB-S2 freq 11126500, hor, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 11126500 22000000 1 2 2
really add
TSID: 0407 ONID: 0001
SAT DVB-S2 freq 11670750, vert, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 11670750 22000000 0 2 2
update
already in todo list
TSID: 045f ONID: 0035
SAT DVB-S freq 12721750, vert, pos 192, sr 22000000, fec 4
try to add 192 12721750 22000000 0 4 1
update
already in todo list
channel done!
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11126500 Pol 1 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1376 mhz
OURSTATE: tuning
[SEC] set static current limiting
set sequence pos 3
[SEC] setVoltage 1
[SEC] sleep 20ms
set sequence pos 3
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038f0
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch pa[4294796.615000] pilot_off!

rams
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1, inversion off, m_tuning 2
[4294796.778000] pilot_on!

(0)fe event: status 0, inversion off, m_tuning 3
(0)fe event: status 1f, inversion off, m_tuning 4
OURSTATE: ok
no version filtering
0000:  00 00 00 00 00 00
mask:  ff 00 00 00 00 00
mode:  00 00 00 00 00 00
no version filtering
0010:  40 00 00 00 00 00
mask:  ff 00 00 00 00 00
mode:  00 00 00 00 00 00
+ 1/1 TID 00
done!
got pat
got pmt -2
no version filtering
0400:  02 78 82 00 00 00
mask:  ff ff ff 00 00 00
mode:  00 00 00 00 00 00
no version filtering
0011:  42 04 14 00 00 00
mask:  fb ff ff 00 00 00
mode:  00 00 00 00 00 00
+ 1/1 TID 02
done!
got pmt 0
no version filtering
0401:  02 78 83 00 00 00
mask:  ff ff ff 00 00 00
mode:  00 00 00 00 00 00
+ 1/1 TID 02
done!
got pmt 0
no version filtering
0402:  02 78 84 00 00 00
mask:  ff ff ff 00 00 00
mode:  00 00 00 00 00 00
+ 1/1 TID 02
done!
got pmt 0
no version filtering
0403:  02 78 85 00 00 00
mask:  ff ff ff 00 00 00
mode:  00 00 00 00 00 00
+ 1/1 TID 02
done!
got pmt 0
no version filtering
0404:  02 78 86 00 00 00
mask:  ff ff ff 00 00 00
mode:  00 00 00 00 00 00
[SEC] set dynamic current limiting
+ 1/1 TID 02
done!
got pmt 0
+ 1/1 TID 42
done!
got sdt 0
SDT: 
ONID: 0001
SID 7882: name 'HOLLYWOODHD', provider_name 'DIGITAL+'
descr<86>
SID 7883: name 'TEST 5', provider_name 'DIGITAL+'
descr<86>
SID 7884: name 'TEST 6', provider_name 'DIGITAL+'
descr<86>
SID 7885: name 'TEST 7', provider_name 'DIGITAL+'
descr<86>
SID 7886: name 'TEST 8', provider_name 'DIGITAL+'
descr<86>
+- 1/2 TID 40
++ 2/2 TID 40
done!
got nit, err 0
dumping NIT
TSID: 0002 ONID: 0085
SAT DVB-S freq 11797500, vert, pos 192, sr 27500000, fec 3
try to add 192 11797500 27500000 0 3 1
update
already in todo list
TSID: 0003 ONID: 0085
SAT DVB-S freq 11719500, vert, pos 192, sr 27500000, fec 3
try to add 192 11719500 27500000 0 3 1
update
already in todo list
TSID: 0004 ONID: 0085
SAT DVB-S freq 12031500, vert, pos 192, sr 27500000, fec 3
try to add 192 12031500 27500000 0 3 1
update
already in todo list
TSID: 0001 ONID: 0085
SAT DVB-S freq 12070500, vert, pos 192, sr 27500000, fec 3
try to add 192 12070500 27500000 0 3 1
update
already in todo list
TSID: 0011 ONID: 0085
SAT DVB-S freq 11758500, vert, pos 192, sr 27500000, fec 3
try to add 192 11758500 27500000 0 3 1
update
already in todo list
TSID: 0006 ONID: 0085
SAT DVB-S2 freq 11914500, vert, pos 192, sr 27500000, fec 9, modulation 1, rolloff 0
try to add 192 11914500 27500000 0 9 1
update
already in todo list
TSID: 000d ONID: 0085
SAT DVB-S2 freq 11992500, vert, pos 192, sr 27500000, fec 9, modulation 1, rolloff 0
try to add 192 11992500 27500000 0 9 1
update
already in todo list
TSID: 000c ONID: 0085
SAT DVB-S2 freq 12304500, vert, pos 192, sr 27500000, fec 9, modulation 1, rolloff 0
try to add 192 12304500 27500000 0 9 1
update
already in todo list
TSID: 000b ONID: 0085
SAT DVB-S2 freq 12382500, vert, pos 192, sr 27500000, fec 9, modulation 1, rolloff 0
try to add 192 12382500 27500000 0 9 1
update
already in todo list
TSID: 000f ONID: 0085
SAT DVB-S freq 10920750, vert, pos 192, sr 22000000, fec 5
try to add 192 10920750 22000000 0 5 1
update
already in todo list
TSID: 0007 ONID: 0085
SAT DVB-S freq 12148500, vert, pos 192, sr 27500000, fec 3
try to add 192 12148500 27500000 0 3 1
update
already in todo list
TSID: 0005 ONID: 0085
SAT DVB-S freq 12460500, vert, pos 192, sr 27500000, fec 3
try to add 192 12460500 27500000 0 3 1
update
already in todo list
TSID: 0021 ONID: 0085
SAT DVB-S freq 12480000, hor, pos 192, sr 27500000, fec 3
try to add 192 12480000 27500000 1 3 1
update
already in todo list
TSID: 000e ONID: 0085
SAT DVB-S2 freq 11875500, vert, pos 192, sr 27500000, fec 9, modulation 1, rolloff 0
try to add 192 11875500 27500000 0 9 1
update
already in todo list
TSID: 0453 ONID: 0001
SAT DVB-S freq 12544750, vert, pos 192, sr 22000000, fec 4
try to add 192 12544750 22000000 0 4 1
update
already in todo list
TSID: 043a ONID: 0001
SAT DVB-S freq 12051000, hor, pos 192, sr 27500000, fec 3
try to add 192 12051000 27500000 1 3 1
update
already in todo list
TSID: 03f9 ONID: 0001
SAT DVB-S2 freq 11464250, vert, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 11464250 22000000 0 2 2
update
already in todo list
TSID: 0421 ONID: 0001
SAT DVB-S2 freq 10832250, vert, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 10832250 22000000 0 2 2
update
already in todo list
TSID: 041d ONID: 0001
SAT DVB-S2 freq 10773250, vert, pos 192, sr 22000000, fec 3, modulation 2, rolloff 2
try to add 192 10773250 22000000 0 3 2
update
already in todo list
TSID: 0444 ONID: 0001
SAT DVB-S freq 12246000, hor, pos 192, sr 27500000, fec 3
try to add 192 12246000 27500000 1 3 1
update
already in todo list
TSID: 03f8 ONID: 0001
SAT DVB-S2 freq 11435500, hor, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 11435500 22000000 1 2 2
update
already in todo list
TSID: 0400 ONID: 0001
SAT DVB-S freq 11567500, hor, pos 192, sr 22000000, fec 4
try to add 192 11567500 22000000 1 4 1
update
already in todo list
TSID: 042a ONID: 0001
SAT DVB-S freq 11739000, hor, pos 192, sr 27500000, fec 3
try to add 192 11739000 27500000 1 3 1
update
already in todo list
TSID: 042c ONID: 0001
SAT DVB-S freq 11778000, hor, pos 192, sr 27500000, fec 3
try to add 192 11778000 27500000 1 3 1
update
already in todo list
TSID: 042e ONID: 0001
SAT DVB-S freq 11817000, hor, pos 192, sr 27500000, fec 3
try to add 192 11817000 27500000 1 3 1
update
already in todo list
TSID: 0459 ONID: 0001
SAT DVB-S freq 12633250, vert, pos 192, sr 22000000, fec 4
try to add 192 12633250 22000000 0 4 1
update
already in todo list
TSID: 0432 ONID: 0001
SAT DVB-S freq 11895000, hor, pos 192, sr 27500000, fec 3
try to add 192 11895000 27500000 1 3 1
update
already in todo list
TSID: 0434 ONID: 0001
SAT DVB-S freq 11934000, hor, pos 192, sr 27500000, fec 3
try to add 192 11934000 27500000 1 3 1
update
already in todo list
TSID: 0436 ONID: 0001
SAT DVB-S freq 11973000, hor, pos 192, sr 27500000, fec 3
try to add 192 11973000 27500000 1 3 1
update
already in todo list
TSID: 0437 ONID: 0001
SAT DVB-S freq 11953500, vert, pos 192, sr 27500000, fec 3
try to add 192 11953500 27500000 0 3 1
update
already in todo list
TSID: 0438 ONID: 0001
SAT DVB-S2 freq 12012000, hor, pos 192, sr 27500000, fec 2, modulation 2, rolloff 0
try to add 192 12012000 27500000 1 2 2
update
already in todo list
TSID: 043e ONID: 0001
SAT DVB-S freq 12129000, hor, pos 192, sr 27500000, fec 3
try to add 192 12129000 27500000 1 3 1
update
already in todo list
TSID: 0441 ONID: 0001
SAT DVB-S freq 12187500, vert, pos 192, sr 27500000, fec 3
try to add 192 12187500 27500000 0 3 1
update
already in todo list
TSID: 0423 ONID: 0001
SAT DVB-S freq 10861750, vert, pos 192, sr 22000000, fec 5
try to add 192 10861750 22000000 0 5 1
update
already in todo list
TSID: 0442 ONID: 0001
SAT DVB-S2 freq 12207000, hor, pos 192, sr 27500000, fec 2, modulation 2, rolloff 0
try to add 192 12207000 27500000 1 2 2
update
already in todo list
TSID: 0443 ONID: 0001
SAT DVB-S freq 12226500, vert, pos 192, sr 27500000, fec 3
try to add 192 12226500 27500000 0 3 1
update
already in todo list
TSID: 0446 ONID: 0001
SAT DVB-S freq 12285000, hor, pos 192, sr 27500000, fec 3
try to add 192 12285000 27500000 1 3 1
update
already in todo list
TSID: 0448 ONID: 0001
SAT DVB-S freq 12324000, hor, pos 192, sr 27500000, fec 3
try to add 192 12324000 27500000 1 3 1
update
already in todo list
TSID: 0449 ONID: 0035
SAT DVB-S freq 12343500, vert, pos 192, sr 27500000, fec 3
try to add 192 12343500 27500000 0 3 1
update
already in todo list
TSID: 044a ONID: 0001
SAT DVB-S freq 12363000, hor, pos 192, sr 27500000, fec 3
try to add 192 12363000 27500000 1 3 1
update
already in todo list
TSID: 044d ONID: 0001
SAT DVB-S freq 11836500, vert, pos 192, sr 27500000, fec 3
try to add 192 11836500 27500000 0 3 1
update
already in todo list
TSID: 04b1 ONID: 0001
SAT DVB-S freq 12421500, vert, pos 192, sr 27500000, fec 3
try to add 192 12421500 27500000 0 3 1
update
already in todo list
TSID: 044c ONID: 0001
SAT DVB-S freq 12402000, hor, pos 192, sr 27500000, fec 3
try to add 192 12402000 27500000 1 3 1
update
already in todo list
TSID: 0451 ONID: 0035
SAT DVB-S freq 12515250, vert, pos 192, sr 22000000, fec 4
try to add 192 12515250 22000000 0 4 1
update
already in todo list
TSID: 0454 ONID: 0001
SAT DVB-S freq 12551500, hor, pos 192, sr 22000000, fec 4
try to add 192 12551500 22000000 1 4 1
update
already in todo list
TSID: 0457 ONID: 0001
SAT DVB-S freq 12603750, vert, pos 192, sr 22000000, fec 4
try to add 192 12603750 22000000 0 4 1
update
already in todo lit
TSID: 03f0 ONID: 0001
SAT DVB-S freq 11317500, hor, pos 192, sr 22000000, fec 4
try to add 192 11317500 22000000 1 4 1
update
already in todo list
TSID: 0402 ONID: 0001
SAT DVB-S freq 11597000, hor, pos 192, sr 22000000, fec 4
try to add 192 11597000 22000000 1 4 1
update
already in todo list
TSID: 040e ONID: 0001
SAT DVB-S freq 11038000, hor, pos 192, sr 22000000, fec 4
try to add 192 11038000 22000000 1 4 1
update
already in todo list
TSID: 0416 ONID: 0001
SAT DVB-S freq 11156000, hor, pos 192, sr 22000000, fec 4
try to add 192 11156000 22000000 1 4 1
update
already in todo list
TSID: 045d ONID: 0001
SAT DVB-S freq 12692250, vert, pos 192, sr 22000000, fec 4
try to add 192 12692250 22000000 0 4 1
update
already in todo list
TSID: 045a ONID: 0001
SAT DVB-S freq 12640000, hor, pos 192, sr 22000000, fec 4
try to add 192 12640000 22000000 1 4 1
update
already in todo list
TSID: 0408 ONID: 0001
SAT DVB-S freq 11685500, hor, pos 192, sr 22000000, fec 4
try to add 192 11685500 22000000 1 4 1
update
already in todo list
TSID: 0456 ONID: 0001
SAT DVB-S2 freq 12581000, hor, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 12581000 22000000 1 2 2
update
already in todo list
TSID: 040a ONID: 0001
SAT DVB-S freq 10979000, hor, pos 192, sr 22000000, fec 4
try to add 192 10979000 22000000 1 4 1
update
already in todo list
TSID: 0424 ONID: 0001
SAT DVB-S freq 10876500, hor, pos 192, sr 22000000, fec 4
try to add 192 10876500 22000000 1 4 1
update
already in todo list
TSID: 0430 ONID: 0001
SAT DVB-S freq 11856000, hor, pos 192, sr 27500000, fec 3
try to add 192 11856000 27500000 1 3 1
update
already in todo list
TSID: 0412 ONID: 0001
SAT DVB-S freq 11097000, hor, pos 192, sr 22000000, fec 4
try to add 192 11097000 22000000 1 4 1
update
already in todo list
TSID: 041e ONID: 0001
SAT DVB-S freq 10788000, hor, pos 192, sr 22000000, fec 4
try to add 192 10788000 22000000 1 4 1
update
already in todo list
TSID: 03fc ONID: 0001
SAT DVB-S freq 11508500, hor, pos 192, sr 22000000, fec 4
try to add 192 11508500 22000000 1 4 1
update
already in todo list
TSID: 0422 ONID: 0001
SAT DVB-S freq 10847000, hor, pos 192, sr 22000000, fec 4
try to add 192 10847000 22000000 1 4 1
update
already in todo list
TSID: 0420 ONID: 0001
SAT DVB-S2 freq 10817500, hor, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 10817500 22000000 1 2 2
update
already in todo list
TSID: 045b ONID: 0001
SAT DVB-S freq 12662750, vert, pos 192, sr 22000000, fec 4
try to add 192 12662750 22000000 0 4 1
update
already in todo list
TSID: 03fa ONID: 0001
SAT DVB-S freq 11479000, hor, pos 192, sr 22000000, fec 4
try to add 192 11479000 22000000 1 4 1
update
already in todo list
TSID: 0445 ONID: 0001
SAT DVB-S freq 12265500, vert, pos 192, sr 27500000, fec 3
try to add 192 12265500 27500000 0 3 1
update
already in todo list
TSID: 0452 ONID: 0001
SAT DVB-S freq 12522000, hor, pos 192, sr 22000000, fec 4
try to add 192 12522000 22000000 1 4 1
update
already in todo list
TSID: 03fe ONID: 0001
SAT DVB-S freq 11538000, hor, pos 192, sr 22000000, fec 4
try to add 192 11538000 22000000 1 4 1
update
already in todo list
TSID: 044e ONID: 0001
SAT DVB-S2 freq 12441000, hor, pos 192, sr 29700000, fec 2, modulation 2, rolloff 1
try to add 192 12441000 29700000 1 2 2
update
already in todo list
TSID: 043c ONID: 0001
SAT DVB-S freq 12090000, hor, pos 192, sr 27500000, fec 3
try to add 192 12090000 27500000 1 3 1
update
already in todo list
TSID: 0440 ONID: 0001
SAT DVB-S freq 12168000, hor, pos 192, sr 27500000, fec 3
try to add 192 12168000 27500000 1 3 1
update
already in todo list
TSID: 0431 ONID: 0001
SAT DVB-S freq 12109500, vert, pos 192, sr 27500000, fec 3
try to add 192 12109500 27500000 0 3 1
update
already in todo list
TSID: 0458 ONID: 0001
SAT DVB-S freq 12610500, hor, pos 192, sr 22000000, fec 4
try to add 192 12610500 22000000 1 4 1
update
already in todo list
TSID: 045e ONID: 0001
SAT DVB-S freq 12699000, hor, pos 192, sr 22000000, fec 4
try to add 192 12699000 22000000 1 4 1
update
already in todo list
TSID: 0460 ONID: 0001
SAT DVB-S freq 12728500, hor, pos 192, sr 22000000, fec 4
try to add 192 12728500 22000000 1 4 1
update
already in todo list
TSID: 041b ONID: 0001
SAT DVB-S freq 10743750, vert, pos 192, sr 22000000, fec 4
try to add 192 10743750 22000000 0 4 1
successfully scanned
TSID: 045f ONID: 0035
SAT DVB-S freq 12721750, vert, pos 192, sr 22000000, fec 4
try to add 192 12721750 22000000 0 4 1
update
already in todo list
TSID: 03f3 ONID: 0001
SAT DVB-S2 freq 11361750, vert, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 11361750 22000000 0 2 2
update
already in todo list
TSID: 0417 ONID: 0001
SAT DVB-S2 freq 11170750, vert, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 11170750 22000000 0 2 2
update
already in todo list
TSID: 03ef ONID: 0001
SAT DVB-S2 freq 11302750, vert, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 11302750 2200000 0 2 2
update
already in todo list
TSID: 045c ONID: 0001
SAT DVB-S2 freq 12669500, hor, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 12669500 22000000 1 2 2
update
already in todo list
TSID: 0404 ONID: 0001
SAT DVB-S freq 11626500, hor, pos 192, sr 22000000, fec 4
try to add 192 11626500 22000000 1 4 1
update
already in todo list
TSID: 041a ONID: 0001
SAT DVB-S2 freq 10729000, hor, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 10729000 22000000 1 2 2
update
already in todo list
TSID: 0428 ONID: 0001
SAT DVB-S2 freq 10935500, hor, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 10935500 22000000 1 2 2
update
already in todo list
TSID: 040d ONID: 0001
SAT DVB-S freq 11023250, vert, pos 192, sr 22000000, fec 4
try to add 192 11023250 22000000 0 4 1
update
already in todo list
TSID: 0414 ONID: 0001
SAT DVB-S2 freq 11126500, hor, pos 192, sr 22000000, fec[4294799.385000] pilot_on!

 2, modulation 2, rolloff 0
try to add 192 11126500 22000000 1 2 2
is current
TSID: 0407 ONID: 0001
SAT DVB-S2 freq 11670750, vert, pos 192, sr 22000000, fec 2, modulation 2, rolloff 0
try to add 192 11670750 22000000 0 2 2
update
a 
(c) 2007,2008 Dream Multimedia GmbH. All rights reserved.

Dreambox D M800

FIRST STAGE 1.01(0x133/high) {BO23456}


2ND STAGE OK, build #82 (2011-02-25)

0.000  - BCM board setup
0.002  - fp init
0.003  - ca init
0.889  - load config
0.916  - config loaded.
 * press [S] to enter setup
OLED found!
lcd: BOOT #82
 - read config file: /boot/secondstage.conf
detected jffs2 blocksize: 16kb
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++
dreamupd initialized
Scanning JFFS2 FS:   .  | / - \ | / - \ | / - \ | /  done.

find_inode failed for name=secondstage.conf

load: Failed to find inode

 - failed to open /boot/secondstage.conf
 - failed to open /cf/autorun.bat
lcd: /flash/bootlogo.elf
bootlogo size: 35911
***  BCHP: Invalid RTS setting detected. Forcing MEMC_0_CLIENT_INFO_7 (AVD_CAB_0) RR to true. Please see latest 7401 RTS documentation.
no HDMI device detected
no HDMI mode available, reverting to 720p
using 1280x720p (60.00 Hz)
create surface 1280 720
Using the Small jpeg decoder library, Copyright (c) 2006, Luc Saillard <luc@saillard.org>
parsing JPEG header..
Virtual FB Size: 1280x720
lcd: /flash/vmlinux.gz
<5>Linux version 2.6.18-7.4-dm800 (newnigma2@vs35) (gcc version 4.4.3 (GCC) ) #1 Mon May 2 10:40:55 UTC 2011
Fetching vars from bootloader... none present, using defaults.
board_init_once: regval=44ac6502, ddr_strap=3, 4 chips, pci_size=2
Detected 256 MB on board
<4>WARNING: read invalid MAC address ff:ff:ff:ff:ff:ff from flash @ 0xbffff824
Default command line = 
root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
2 831ffeb8 83029368
g_board_RAM_size=256MB
Options: sata=1 enet=1 emac_1=0 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=0
CPU revision is: 00020000
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
---> memsize from bootloader: 148
User-defined physical RAM map:
node [00000000, 09400000: RAM]
node [09400000, 06c00000: RSVD]
<5>Reserving 108 MB upper memory starting at 09400000
<7>On node 0 totalpages: 65536
<7>  DMA zone: 65536 pages, LIFO batch:15
Built 1 zonelists.  Total pages: 65536
<5>Kernel command line: console=ttyS0,115200 root=/dev/mtdblock3 rootfstype=jffs2 rw
before init RAC 0x02a00000	0x00000000
after init RAC 0x02a0000f	0x0fff0000
[4294667.296000] Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes.

[4294667.296000] Primary data cache 32kB, 2-way, linesize 16 bytes.

[4294667.296000] Synthesized TLB refill handler (20 instructions).

[4294667.296000] Synthesized TLB load handler fastpath (32 instructions).

[4294667.296000] Synthesized TLB store handler fastpath (32 instructions).

[4294667.296000] Synthesized TLB modify handler fastpath (31 instructions).

[4294667.296000] timer irq 67 end 57

[4294667.296000] PID hash table entries: 2048 (order: 11, 8192 bytes)

[4294667.296000] Found MIPS counter frequency: 149 Mhz

[4294667.296000] Using 148.501 MHz high precision timer.

[4294667.296000] Console: colour dummy device 80x25

[4294667.296000] ################## brcm_serial_console_init, sercon=80301a80

[4294667.369000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

[4294667.378000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

[4294667.412000] Memory: 145664k/262144k available (2687k kernel code, 116412k reserved, 593k data, 128k init, 0k highmem)

[4294667.446000] Mount-cache hash table entries: 512

[4294667.452000] Checking for 'wait' instruction...  available.

[4294667.461000] NET: Registered protocol family 16

[4294667.467000] registering PCI controller with io_map_base unset

[4294667.473000] registering PCI controller with io_map_base unset

[4294667.481000] SCSI subsystem initialized

[4294667.486000] usbcore: registered new driver usbfs

[4294667.491000] usbcore: registered new driver hub

[4294667.497000] SATA: Primary Bus Master Status Register offset = b0520000 + 00000300 = b0520300

[4294667.506000] SATA: before init Primary Bus Master Status reg = 0x00000000.

[4294667.513000] SATA: after init Primary Bus Master Status reg = 0x00000020.

[4294667.521000] NET: Registered protocol family 2

[4294667.535000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)

[4294667.543000] TCP established hash table entries: 8192 (order: 3, 32768 bytes)

[4294667.551000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)

[4294667.558000] TCP: Hash tables configured (established 8192 bind 4096)

[4294667.565000] TCP reno registered

[4294667.573000] JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.

[4294667.580000] Initializing Cryptographic API

[4294667.585000] io scheduler noop registered

[4294667.589000] io scheduler anticipatory registered (default)

[4294667.595000] io scheduler deadline registered

[4294667.599000] io scheduler cfq registered

[4294667.612000] Broadcom serial driver version 1.00 (2000-11-09) with SERIAL_PCI enabled

[4294667.634000] Broadcom BCM7401 P31 Ethernet Network Device v2.0 May  2 2011 10:38:17

[4294667.642000] SUNDRY revision = 74010021, have IP Hdr Opt=1

[4294667.655000] Config Internal PHY Through MDIO: 100 MB Full-Duplex (auto-neg)

[4294669.310000] ata1: SATA max UDMA/133 cmd 0xB0510000 ctl 0xB0510020 bmdma 0xB0510030 irq 42

[4294669.319000] scsi0 : sata_svw

[4294669.629000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl F0000)

[4294669.635000] ATA: ata_busy_wait 0xD0 timeout spinup?!? 4960 msecs left

[4294669.684000] ata1.00: ATA-7, max UDMA/100, 156301488 sectors: LBA48 

[4294669.691000] ata1.00: ata1: dev 0 multi count 0

[4294669.697000] ata1.00: configured for UDMA/100

[4294669.703000]   Vendor: ATA       Model: HTS541080G9SA00   Rev: MB4I

[4294669.709000]   Type:   Direct-Access                      ANSI SCSI revision: 05

[4294669.718000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)

[4294669.725000] sda: Write Protect is off

[4294669.729000] SCSI device sda: drive cache: write back

[4294669.735000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)

[4294669.742000] sda: Write Protect is off

[4294669.746000] SCSI device sda: drive cache: write back

[4294669.752000]  sda: sda1

[4294670.129000] sd 0:0:0:0: Attached scsi disk sda

[4294670.134000] sd 0:0:0:0: Attached scsi generic sg0 type 0

[4294670.140000] Broadcom STB NAND controller (BrcmNand Controller)

[4294670.147000] B4: NandSelect=40000002, nandConfig=04042300, chipSelect=1

[4294670.154000] brcmnand_probe: CS1: dev_id=ad76ad76

[4294670.159000] After: NandSelect=40000002, nandConfig=04042300

[4294670.164000] NAND Config: Reg=04042300, chipSize=64 MB, blockSize=16K, erase_shift=e

[4294670.172000] busWidth=1, pageSize=512B, page_shift=9, page_mask=000001ff

[4294670.179000] timing1 not adjusted: 5363444f

[4294670.184000] timing2 not adjusted: 00000fc6

[4294670.188000] BrcmNAND mfg ad 76 Hynix HY27US08121A (dream) 64MB

[4294670.194000] 

[4294670.194000] Found NAND: ACC=00000000, cfg=04042300, flashId=ad76ad76, tim1=5363444f, tim2=00000fc6

[4294670.205000] BrcmNAND version = 0x0001 64MB @00000000

[4294670.210000] Found NAND chip on Chip Select 1, chipSize=64MB, usable size=64MB, base=14000000

[4294670.219000] ACC_CONTROL B4: 00000000

[4294670.223000] ACC_CONTROL after: 20000000

[4294670.227000] page_shift=9, bbt_erase_shift=14, chip_shift=26, phys_erase_shift=14

[4294670.235000] Brcm NAND controller version = 0.1 NAND flash size 64MB @14000000

[4294670.242000] mtd->oobsize=16, mtd->eccOobSize=16

[4294670.247000] brcmnand_scan:  mtd->oobsize=16

[4294670.252000] brcmnand_scan: oobavail=12, eccsize=512, writesize=512

[4294670.258000] brcmnand_scan, eccsize=512, writesize=512, eccsteps=1, ecclevel=15, eccbytes=3

[4294670.267000] brcmnand_default_bbt: bbt_td = bbt_main_descr

[4294670.274000] brcmnandCET: Status -> Deferred

[4294670.279000] 	numchips=1, size=4000000

[4294670.283000] Creating 4 MTD partitions on "bcm7xxx-nand.0":

[4294670.288000] 0x0000000000000000-0x0000000004000000 : "complete"

[4294670.298000] 0x0000000000000000-0x0000000000040000 : "loader"

[4294670.305000] 0x0000000000040000-0x0000000000400000 : "boot partition"

[4294670.312000] 0x0000000000400000-0x0000000004000000 : "root partition"

[4294670.322000] ehci_hcd_brcm_init: Initializing 1 EHCI controller(s)

[4294670.329000] 10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm-0)

[4294670.337000] drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller

[4294670.345000]  - USB h/w setup mode <B>

[4294670.345000]  - USB power enable set for active LOW mode

[4294670.354000] brcm-ehci brcm-ehci.0: BRCM EHCI

[4294670.359000] brcm-ehci brcm-ehci.0: new USB bus registered, assigned bus number 1

[4294670.367000] brcm-ehci brcm-ehci.0: irq 62, io mem 0x10480300

[4294670.373000] brcm-ehci brcm-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004

[4294670.382000] usb usb1: configuration #1 chosen from 1 choice

[4294670.388000] hub 1-0:1.0: USB hub found

[4294670.392000] hub 1-0:1.0: 2 ports detected

[4294670.497000] ohci_hcd_brcm_init: Initializing 2 OHCI controller(s)

[4294670.504000] 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-0)

[4294670.512000] drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller

[4294670.519000]  - Resetting at b0480408

[4294670.523000] <-- brcm_start_hc

[4294670.526000] brcm-ohci-0 brcm-ohci-0.0: BRCM OHCI

[4294670.531000] brcm-ohci-0 brcm-ohci-0.0: new USB bus registered, assigned bus number 2

[4294670.540000] brcm-ohci-0 brcm-ohci-0.0: irq 63, io mem 0x10480400

[4294670.601000] usb usb2: configuration #1 chosen from 1 choice

[4294670.607000] hub 2-0:1.0: USB hub found

[4294670.612000] hub 2-0:1.0: 2 ports detected

[4294670.717000] 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-1)

[4294670.726000] drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller

[4294670.733000]  - Resetting at b0480508

[4294670.737000] <-- brcm_start_hc

[4294670.740000] brcm-ohci-1 brcm-ohci-1.1: BRCM OHCI

[4294670.745000] brcm-ohci-1 brcm-ohci-1.1: new USB bus registered, assigned bus number 3

[4294670.753000] brcm-ohci-1 brcm-ohci-1.1: irq 64, io mem 0x10480500

[4294670.815000] usb usb3: configuration #1 chosen from 1 choice

[4294670.821000] hub 3-0:1.0: USB hub found

[4294670.825000] hub 3-0:1.0: 2 ports detected

[4294670.931000] Initializing USB Mass Storage driver...

[4294670.937000] usbcore: registered new driver usb-storage

[4294670.942000] USB Mass Storage support registered.

[4294670.947000] i2c /dev entries driver

[4294670.951000] Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).

[4294670.961000] ALSA device list:

[4294670.964000]   No soundcards found.

[4294670.968000] TCP bic registered

[4294670.972000] NET: Registered protocol family 1

[4294670.976000] NET: Registered protocol family 17

[4294671.519000] Empty flash at 0x0043d1ec ends at 0x0043d200

[4294673.846000] Empty flash at 0x014b5620 ends at 0x014b5800

[4294679.441000] VFS: Mounted root (jffs2 filesystem).

[4294679.447000] Freeing unused kernel memory: 128k freed


INIT: version 2.86 booting

[4294680.761000] stb_core: module license 'Proprietary' taints kernel.

[4294680.911000] 4008582 ms: 

[4294680.971000] 57 ms: 27 Starting /etc/rcS.d/S02sysfs...

[4294680.993000] 17 ms: =s

Start UDEV
[4294684.365000] 3369 ms: 29 Starting /etc/rcS.d/S03udev...

[4294684.387000] 16 ms: =s

[4294684.407000] 17 ms: 31 Starting /etc/rcS.d/S04bootup...

[4294684.415000] 3 ms: 10

[4294684.727000] Empty flash at 0x0020a634 ends at 0x0020a800

[4294685.211000] kjournald starting.  Commit interval 5 seconds

[4294685.217000] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended

[4294685.227000] EXT3 FS on sda1, internal journal

[4294685.231000] EXT3-fs: recovery complete.

[4294685.236000] EXT3-fs: mounted filesystem with ordered data mode.

[4294685.254000] 837 ms: 11

[4294685.288000] 32 ms: 12

modprobe: module nfsd not found in modules.dep
[4294685.580000] cdfs 2.6.27 loaded.

[4294685.718000] fuse init (API version 7.8)

[4294685.723000] fuse distribution version: 2.7.6

modprobe: module tun not found in modules.dep
modprobe: module ipv6 not found in modules.dep
modprobe: module nls_cp437 not found in modules.dep
[4294686.178000] usbcore: registered new driver usbserial

[4294686.183000] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic

[4294686.192000] usbcore: registered new driver usbserial_generic

[4294686.198000] drivers/usb/serial/usb-serial.c: USB Serial Driver core

[4294686.272000] drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device

[4294686.281000] usbcore: registered new driver ftdi_sio

[4294686.287000] drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver

[4294686.363000] drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303

[4294686.371000] usbcore: registered new driver pl2303

[4294686.376000] drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver

modprobe: module hfs not found in modules.dep
modprobe: module hfsplus not [4294686.511000] 1221 ms: 13

found in modules.dep[4294686.515000] 1 ms: 14



/dev/sda:
 setting acoustic management to 128
 acoustic      = 128 (128[4294686.649000] 131 ms: 15

=quiet ... 254=fast)
[4294686.687000] input: dreambox remote control (native) as /class/input/input0

[4294686.695000] input: dreambox advanced remote control (native) as /class/input/input1

[4294686.805000] input: dreambox ir keyboard as /class/input/input2

[4294686.812000] input: dreambox ir mouse as /class/input/input3

[4294689.339000] enter base init, xvd 20090807, vdc 20080313, rap 20090430, xpt 20080313

[4294689.347000] kernMemSize : 148 MB

[4294689.362000] 22:66016000 SMCA: controller reset timed out

[4294691.875000] register adapter

[4294691.879000] register adapter

[4294691.882000] register adapter

[4294691.886000] register adapter

[4294691.889000] register adapter

[4294691.893000] input: dreambox front panel as /class/input/input4

[4294691.926000] HDMI: no device attached

[4294691.930000] set sb to 3(2)

[4294691.933000] set fb to 2(-1)

[4294691.936000] set input to 0

[4294691.939000] set fb to 2(-1)

[4294691.944000] bcm_video_analog_port_setup (fmt=6)

[4294691.949000] SET FORMAT: display[1], format=6

[4294691.954000] display 0 uses vbi path 1

[4294691.958000] display 1 uses vbi path 0

[4294691.962000] HDMI: hotplug handler!

[4294691.966000] HDMI: no device attached

[4294691.970000] using 50.00Hz as MonitorRefreshRate

[4294691.974000] SET FORMAT: display[0], format=24

[4294691.979000] set fb to 2(0)

[4294691.982000] bcm_video_analog_port_setup (fmt=6)

[4294691.987000] SET FORMAT: display[1], format=6

[4294692.033000] disable wss on display 0

[4294692.036000] disable wss on display 1

[4294692.041000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)

[4294692.245000] enable mad

[4294692.313000] VIDEO0: set fallback framerate to 60000

[4294692.318000] VIDEO0: set progressive override mode to 1

[4294692.324000] VIDEO0: set streamtype!

[4294692.327000] set MPEG2

[4294692.330000] sw rave disabled!

[4294692.339000] sync is off so we enable it

[4294692.343000] playback!

[4294692.346000] total video delay: 0 (0 ms)

[4294692.358000] VIDEO0: start decode

[4294692.361000] flush video decoder

[4294692.364000] VIDEO0 got pts failed !!!! (ret 0)

[4294692.825000] set ac3 to downmix

[4294692.829000] set aac to downmix

[4294692.872000] VIDEO0: first pts 0x0

[4294692.889000] init ALSA!

[4294692.895000] DVB: registering new adapter (BCM7401)

[4294693.043000] autodetecting NIMs...

[4294693.048000] ret: 2, feid: 06

[4294693.051000] Found: Slot A, ID: 06 (by CA)

[4294693.056000] Initializing adapter 0 (Alps BSBE2-DVB-S2)

[4294693.061000] special BSBE2 treatment:

[4294693.889000] enable tsm0

[4294693.893000] cx24116: invalid id: 7d

[4294693.897000] (failed)

[4294694.928000] special BSBE2 treatment:

[4294699.503000] DVB: registering adapter 0 frontend 0 (cx24116)...

[4294699.510000] registered vtuner vtuner0, minor 60

[4294699.516000] registered vtuner vtuner1, minor 59

[4294701.542000] VIDEO0: stop decode

[4294701.545000] no decoder left in sync handling so disable xpt_sync

[4294701.566000] 14914 ms: 16

[4294701.571000] 2 ms: 17

[4294701.578000] 4 ms: 18

[4294701.602000] 21 ms: 19

[4294701.625000] 21 ms: 20

[4294701.630000] 2 ms: 21

[4294701.655000] 22 ms: 22

[4294701.659000] 1 ms: 23

[4294701.664000] 2 ms: 24

[4294701.713000] using 50.00Hz as MonitorRefreshRate

[4294701.836000] SET FORMAT: display[0], format=18

[4294701.841000] bcm_video_analog_port_setup (fmt=6)

[4294702.010000] SET FORMAT: display[1], format=6

[4294702.045000] set current avs auto aspect to 16:9

[4294702.050000] disable wss on display 0

[4294702.054000] disable wss on display 1

[4294702.059000] set sb to 3(1)

[4294702.107000] VIDEO0: set blank to 0

[4294702.111000] sync is off so we enable it

[4294702.116000] playback!

[4294702.119000] total video delay: 0 (0 ms)

[4294702.154000] VIDEO0: start decode

[4294702.168000] flush video decoder

[4294702.612000] VIDEO0: first pts 0x0

[4294702.616000] VIDEO0: framerate changed 3

[4294702.620000] VIDEO0: resolution changed (1280 720)

[4294702.625000] VIDEO0: aspect changed 3

[4294702.652000] set current avs auto aspect to 16:9

[4294702.658000] disable wss on display 0

[4294702.662000] disable wss on display 1

[4294702.666000] set current avs auto aspect to 16:9

[4294702.671000] disable wss on display 0

[4294702.675000] disable wss on display 1

[4294702.679000] set sb to 3(1)

[4294702.717000] VIDEO0: set blank to 0

[4294702.829000] enable tsm0

[4294703.027000] VIDEO0: stop decode

[4294703.030000] VIDEO0: set blank to 0

[4294703.035000] no decoder left in sync handling so disable xpt_sync

[4294707.717000] 6050 ms: 25

[4294709.270000] 1551 ms: 26

[4294711.040000] 1766 ms: 27

[4294711.064000] 21 ms: =s

[4294711.191000] 125 ms: 33 Starting /etc/rcS.d/S10tpmd...

[4294711.218000] 21 ms: =s

de[4294711.631000] usbcore: registered new driver rt73

[4294711.881000] 

[4294711.883000]  _____     ____    _    ____

[4294711.887000] |__  /   _|  _ \  / \  / ___|

[4294711.891000]   / / | | | | | |/ _ \ \___ \

[4294711.896000]  / /| |_| | |_| / ___ \ ___) |

[4294711.901000] /____\__, |____/_/   \_\____/

[4294711.905000]      |___/

[4294711.907000] ZD1211B - version 2.22.0.0-development

[4294711.913000] usbcore: registered new driver zd1211b

[4294712.016000] 795 ms: 35 Starting /etc/rcS.d/S20modutils.sh...

[4294712.041000] 19 ms: =s

[4294712.120000] 76 ms: 37 Starting /etc/rcS.d/S38devpts.sh...

[4294712.147000] 22 ms: =s

[4294713.341000] 1191 ms: 39 Starting /etc/rcS.d/S40networking...

[4294713.368000] 21 ms: =s

[4294713.753000] 383 ms: 41 Starting /etc/rcS.d/S41rdate...

[4294713.779000] 21 ms: =s

[4294713.859000] 77 ms: 43 Starting /etc/rcS.d/S43portmap...


INIT: Entering runlevel: 3

Starting system message bus: dbus.
Starting Dropbear SSH server: dropbear.
Starting internet superserver: inetd.
Starting syslogd/klogd: done
* starting FTP Server: vsftpd... chown: unknown user ftp
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[ ok ]
 * Starting Avahi Unicast DNS Configuration Daemon: avahi-dnsconfd
[ ok ]
* starting eDaemon: eDaemon... done.
[SCRIPT] start: CCcam 2.2.1
[4294717.835000] VIDEO0: set blank to 0

[4294717.940000] sync is off so we enable it

[4294717.944000] playback!

[4294717.946000] total video delay: 0 (0 ms)

[4294718.055000] VIDEO0: start decode

[4294718.070000] flush video decoder

[4294718.132000] VIDEO0: first pts 0x0

[4294718.250000] VIDEO0: set blank to 0

[4294718.256000] VIDEO0: stop decode

[4294718.261000] VIDEO0: set blank to 0

[4294718.264000] no decoder left in sync handling so disable xpt_sync

setenv('prefix', '/usr', 0)
setenv('exec_prefix', '/usr', 0)
setenv('bindir', '/usr/bin', 0)
setenv('sbindir', '/usr/sbin', 0)
setenv('libexecdir', '/usr/libexec', 0)
setenv('datarootdir', '${prefix}/share', 0)
setenv('datadir', '/usr/share', 0)
setenv('sysconfdir', '/etc', 0)
setenv('sharedstatedir', '/com', 0)
setenv('localstatedir', '/var', 0)
setenv('libdir', '/usr/lib', 0)
setenv('localedir', '${datarootdir}/locale', 0)
setenv('prefix', '/usr', 1)
setenv('exec_prefix', '/usr', 1)
setenv('bindir', '/usr/bin', 1)
setenv('sbindir', '/usr/sbin', 1)
setenv('libexecdir', '/usr/libexec', 1)
setenv('datarootdir', '/usr/share', 1)
setenv('datadir', '/usr/share', 1)
setenv('sysconfdir', '/etc', 1)
setenv('sharedstatedir', '/com', 1)
setenv('localstatedir', '/var', 1)
setenv('libdir', '/usr/lib', 1)
setenv('localedir', '/usr/share/locale', 1)
resolve: resolve ${datadir}/enigma2/encoding.conf
resolve: -> /usr/share/enigma2/encoding.conf
resolve: resolve ${libdir}/enigma2/python
resolve: -> /usr/lib/enigma2/python
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (8) graphics acceleration manager
+ (9) GFBDC
16384k video mem
[4294722.121000] bcmfb: enable manual blit

[4294722.149000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)

 - double buffering available!
13144kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
+ (9) gLCDDC
lcd buffer 0x6b22f8 8448 bytes, stride 132
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox remote control (native)" is not a keyboard.
Input device "dreambox advanced remote control (native)" is not a keyboard.
Input device "dreambox ir keyboard" is a keyboard.
Input device "dreambox ir mouse" is not a keyboard.
Input device "dreambox front panel" is not a keyboard.
Found 5 input devices!
+ (21) Console RC Driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
cannot open /proc/stb/tsmux/input0
cannot open /proc/stb/tsmux/input1
done, found 0 common interface slots
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
resolve: resolve ${sysconfdir}/enigma2/lamedb
resolve: -> /etc/enigma2/lamedb
---- opening lame channel db
reading services (version 4)
loaded 1523 services
scanning for frontends..
opening frontend 0
detected satellite frontend
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 4 demux, boxtype 1
Use valid Linux Time :) (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
resolve: resolve ${datadir}/enigma2/skin_default/pal.png
resolve: -> /usr/share/enigma2/skin_default/pal.png
Loading spinners...
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait1.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait1.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait2.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait2.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait3.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait3.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait4.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait4.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait5.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait5.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait6.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait6.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait7.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait7.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait8.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait8.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait9.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait9.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait10.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait10.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait11.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait11.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait12.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait12.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait13.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!

executing main
setIoPrio best-effort level 3 ok
resolve: resolve ${libdir}/enigma2/python/mytest.py
resolve: -> /usr/lib/enigma2/python/mytest.py
main thread is non-idle! display spinner!
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${datadir}/fonts/
resolve: -> /usr/share/fonts/
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
resolve: resolve ${libdir}/enigma2/python/Plugins/
resolve: -> /usr/lib/enigma2/python/Plugins/
resolve: resolve ${datadir}/enigma2/po/
resolve: -> /usr/share/enigma2/po/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/share/enigma2/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/share/enigma2/
resolve: resolve ${sysconfdir}/enigma2/playlist/
resolve: -> /etc/enigma2/playlist/
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/share/enigma2/defaults/
resolve: resolve ${datadir}/enigma2/dealer
resolve: -> /usr/share/enigma2/dealer
resolve: resolve ${datadir}/meta
resolve: -> /usr/share/meta
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/share/enigma2/defaults/
[4294724.805000] 10941 ms: =s

[4294724.820000] 12 ms: 50 

[4294725.223000] 400 ms: 50 

[4294725.311000] 85 ms: 50 

[4294725.363000] 48 ms: 50 

[4294726.082000] alps_bsbe2 is in powersave mode now

main thread is non-idle! display spinner!
[4294726.861000] 1495 ms: 50 

couldn't open fp
enumerating block devices...
found block device 'mtdblock3': blacklisted
found block device 'mtdblock2': blacklisted
found block device 'mtdblock1': blacklisted
found block device 'mtdblock0': blacklisted
found block device 'sda': ok, removable=False, cdrom=False, partitions=['sda1']
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sda')
found block device 'sda1': error querying properties
[4294727.425000] 561 ms: 52 

not loading user skin:  [Errno 2] No such file or directory: '/etc/enigma2/skin_user.xml'
[4294728.275000] 847 ms: 53 

[4294728.563000] 285 ms: 54 

[4294728.590000] 24 ms: 54 

[4294728.597000] 4 ms: 54 

[4294728.603000] 3 ms: 54 

Preferred tag editor set to  None
[4294729.504000] 898 ms: 54 

[4294729.511000] 4 ms: 55 

[4294729.721000] 206 ms: 55 

[4294730.546000] 822 ms: 55 

Reading satellites.xml
resolve: resolve ${datadir}/enigma2/unicable.xml
resolve: -> /usr/share/enigma2/unicable.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr Alps BSBE2, need rotorworkaround Yes, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode:  diseqc_a_b
sec config completed
[4294735.943000] 5394 ms: 56 

[4294735.985000] 39 ms: 63 

[4294735.991000] 3 ms: 63 

[4294735.999000] 4 ms: 63 

[4294736.045000] 43 ms: 63 

[4294736.099000] 51 ms: 63 

resolve: resolve ${datadir}/enigma2/setup.xml
resolve: -> /usr/share/enigma2/setup.xml
[4294738.353000] 2251 ms: 63 

[4294738.361000] 5 ms: 65 

[4294738.405000] 41 ms: 65 

resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.tv
120 entries in Bouquet userbouquet.favourites.tv
1 entries in Bouquet bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigm[4294738.454000] 46 ms: 66 

a2/
loading bouquet... /etc/enigma2/bouquets.radio
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.radio
0 entries in Bouquet userbouquet.favourites.radio
1 entries in Bouquet bouquets.radio
[4294738.535000] 79 ms: 66 

[4294738.625000] 88 ms: 66 

[4294738.633000] 5 ms: 66 

[4294738.643000] 8 ms: 66 

[eDVBLocalTimeHandler] enable[4294738.665000] 20 ms: 66 

 sync local time with transponder time!
/usr/lib/python2.6/site-packages/twisted/internet/_sslverify.py:5: DeprecationWarning: the md5 module is deprecated; use hashlib instead
  import itertools, md5
[4294743.325000] 4657 ms: 66 

[4294743.336000] 8 ms: 71 

add dreampackage scanner plugin
added
[4294743.792000] 454 ms: 71 

[4294743.800000] 5 ms: 72 

[4294743.924000] 121 ms: 72 

[4294743.935000] 8 ms: 72 

[4294743.946000] 8 ms: 72 

[4294743.965000] 17 ms: 72 

[4294744.003000] 35 ms: 72 

[4294744.057000] 52 ms: 72 

[4294744.064000] 5 ms: 72 

[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Display)
[4294744.249000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)

 - double buffering available!
9184kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[4294744.929000] 862 ms: 72 

[4294745.094000] 163 ms: 73 

[4294745.133000] set current avs auto aspect to 4:3

[4294745.137000] disable wss on display 0

[4294745.141000] disable wss on display 1

[4294745.145000] set sb to 3(2)

[4294745.155000] set current avs auto aspect to 4:3

[4294745.159000] disable wss on display 0

[4294745.163000] disable wss on display 1

[4294745.167000] set sb to 3(2)

[4294745.177000] disable wss on display 0

[4294745.181000] set wss 8 on display 1

[4294745.214000] set input to 0

[4294745.217000] set fb to 2(0)

[4294745.220000] set current avs auto aspect to 4:3

[4294745.225000] disable wss on display 0

[4294745.229000] set wss 8 on display 1

[4294745.233000] set sb to 3(2)

[4294745.244000] set ac3 to downmix

--> setting scaler_sharpness to: 0000000D
[4294745.285000] 189 ms: 73 

[4294745.310000] 22 ms: 74 

couldn't open /proc/stb/misc/12V_output
resolve: resolve ${datadir}/enigma2/keymap.xml
resolve: -> /usr/share/enigma2/keymap.xml
[4294745.458000] 144 ms: 74 

[4294745.985000] 524 ms: 74 

[ePopen] command: ip -o addr show dev eth0
[4294746.075000] 87 ms: 74 

setLCDBrightness 25
setLCDBrightness 127
[4294746.139000] 61 ms: 75 

resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/share/keymaps/
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/share/keymaps/
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/share/keymaps/
Activating keymap: Keyboard English
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/share/keymaps/
[ePopen] command: loadkmap < /usr/share/keymaps/eng.kmap
Activating language German
language set to de_DE
[4294749.287000] 3145 ms: 75 

[4294749.305000] 15 ms: 78 

[4294749.333000] 25 ms: 78 

/usr/lib/enigma2/python/Plugins/Extensions/WebInterface/__init__.py:4: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
  import os, gettext, sha
[WebInterface] set language to  de
[WebInterface] set language to  de
[WebInterface] fallback to default translation for Webinterface
resolve: resolve ${libdir}/enigma2/python/Plugins/SystemPlugins/WirelessLan
resolve: -> /usr/lib/enigma2/python/Plugins/SystemPlugins/WirelessLan
getModeList for port DVI-PC
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI-PC
getModeList for port DVI
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[4294754.733000] set current avs auto aspect to 16:9

[4294754.738000] disable wss on display 0

[4294754.742000] set wss 7 on display 1

[4294754.746000] set sb to 3(1)

[4294754.872000] set current avs auto aspect to 16:9

[4294754.877000] disable wss on display 0

[4294754.881000] set wss 7 on display 1

[4294754.885000] set sb to 3(1)

[4294754.891000] disable wss on display 0

[4294754.896000] set wss 7 on display 1

[4294754.903000] set current avs auto aspect to 16:9

[4294754.908000] disable wss on display 0

[4294754.913000] set wss 7 on display 1

[4294754.917000] set sb to 3(1)

-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[4294754.939000] set current avs auto aspect to 16:9

[4294754.944000] disable wss on display 0

[4294754.948000] set wss 7 on display 1

[4294754.953000] set sb to 3(1)

[4294754.960000] set current avs auto aspect to 16:9

[4294754.965000] disable wss on display 0

[4294754.969000] set wss 7 on display 1

[4294754.973000] set sb to 3(1)

[4294754.980000] disable wss on display 0

[4294754.984000] set wss 7 on display 1

[4294754.990000] set current avs auto aspect to 16:9

[4294754.996000] disable wss on display 0

[4294755.000000] set wss 7 on display 1

[4294755.004000] set sb to 3(1)

-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[4294755.020000] set current avs auto aspect to 16:9

[4294755.025000] disable wss on display 0

[4294755.029000] set wss 7 on display 1

[4294755.034000] set sb to 3(1)

[4294755.044000] set current avs auto aspect to 16:9

[4294755.049000] disable wss on display 0

[4294755.053000] set wss 7 on display 1

[4294755.057000] set sb to 3(1)

[4294755.067000] disable wss on display 0

[4294755.071000] set wss 7 on display 1

[4294755.080000] set current avs auto aspect to 16:9

[4294755.085000] disable wss on display 0

[4294755.089000] set wss 7 on display 1

[4294755.094000] set sb to 3(1)

-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[4294755.110000] set current avs auto aspect to 16:9

[4294755.115000] disable wss on display 0

[4294755.119000] set wss 7 on display 1

[4294755.123000] set sb to 3(1)

[4294755.129000] set current avs auto aspect to 16:9

[4294755.135000] disable wss on display 0

[4294755.139000] set wss 7 on display 1

[4294755.143000] set sb to 3(1)

[4294755.154000] disable wss on display 0

[4294755.158000] set wss 7 on display 1

[4294755.166000] set current avs auto aspect to 16:9

[4294755.171000] disable wss on display 0

[4294755.175000] set wss 7 on display 1

[4294755.179000] set sb to 3(1)

setMode - port: DVI mode: 1080i rate: 50Hz
[4294755.195000] set current avs auto aspect to 16:9

[4294755.200000] disable wss on display 0

[4294755.204000] set wss 7 on display 1

[4294755.208000] set sb to 3(1)

[4294755.216000] set current avs auto aspect to 16:9

[4294755.220000] disable wss on display 0

[4294755.225000] set wss 7 on display 1

[4294755.228000] set sb to 3(1)

-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[4294755.246000] set current avs auto aspect to 16:9

[4294755.251000] disable wss on display 0

[4294755.256000] set wss 7 on display 1

[4294755.260000] set sb to 3(1)

[4294755.269000] set current avs auto aspect to 16:9

[4294755.275000] disable wss on display 0

[4294755.279000] set wss 7 on display 1

[4294755.283000] set sb to 3(1)

[4294755.290000] disable wss on display 0

[4294755.295000] set wss 7 on display 1

[4294755.302000] set current avs auto aspect to 16:9

[4294755.307000] disable wss on display 0

[4294755.311000] set wss 7 on display 1

[4294755.315000] set sb to 3(1)

resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/share/enigma2/
getFPVersion failed!
sh: fpupgrade: not found
/usr/lib/python2.6/site-packages/twisted/mail/smtp.py:10: DeprecationWarning: the MimeWriter module is deprecated; use the email package instead
  import MimeWriter, tempfile, rfc822
[4294756.513000] JFFS2 notice: (624) check_node_data: wrong data CRC in data node at 0x0043ce00: read 0x7fa3e480, calculated 0xdd72df04.

--> setting contrast to: 00008000
--> setting saturation to: 00008000
--> setting hue to: 00008000
--> setting brightness to: 00008000
--> setting block_noise_reduction to: 00000000
--> setting mosquito_noise_reduction to: 00000000
--> setting digital_contour_removal to: 00000000
--> applying pep values
[getMountedPartitions] Step 1/3: got Harddisk mountet on /media/hdd
[getMountedPartitions] Step 2/3: /media/hdd is writeable. Append Harddisk to my part list
[getMountedPartitions] Step 1/3: got Internal Flash mountet on /
[getMountedPartitions] Step 2/3: / is writeable. Append Internal Flash to my part list
[getMountedPartitions] Step 3/3: parts are available. return part list to getmountedpart
[getMountedPartitions] Step 1/3: got Harddisk mountet on /media/hdd
[getMountedPartitions] Step 2/3: /media/hdd is writeable. Append Harddisk to my part list
[getMountedPartitions] Step 1/3: got Internal Flash mountet on /
[getMountedPartitions] Step 2/3: / is writeable. Append Internal Flash to my part list
[getMountedPartitions] Step 3/3: parts are available. return part list to getmountedpart
[getMountedPartitions] Step 1/3: got Harddisk mountet on /media/hdd
[getMountedPartitions] Step 2/3: /media/hdd is writeable. Append Harddisk to my part list
[getMountedPartitions] Step 1/3: got Internal Flash mountet on /
[getMountedPartitions] Step 2/3: / is writeable. Append Internal Flash to my part list
[getMountedPartitions] Step 3/3: parts are available. return part list to getmountedpart
[getMountedPartitions] Step 1/3: got Harddisk mountet on /media/hdd
[getMountedPartitions] Step 2/3: /media/hdd is writeable. Append Harddisk to my part list
[getMountedPartitions] Step 1/3: got Internal Flash mountet on /
[getMountedPartitions] Step 2/3: / is writeable. Append Internal Flash to my part list
[getMountedPartitions] Step 3/3: parts are available. return part list to getmountedpart
[OSD preference] found: /usr/share/enigma2/newnigma2-HD/icons/beta_g.png
[OSD preference] append "icon" option to list
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (LCD_NN)
[eCamdCtrl] starting cmd 5
[eCamdCtrl] executing /usr/bin/camdctrl current
starting hotplug handler
[CrashlogAutoSubmit] - autostart
[4294762.966000] 13631 ms: 78 

It's now  Sun Aug 21 18:34:54 2011
[timer.py] next activation: 1313944594 (in 99610 ms)
wasTimerWakeup failed!
It's now  Sun Aug 21 18:34:54 2011
[timer.py] next activation: 1313944594 (in 99592 ms)
Looking for embedded skin
port changed to DVI
mode changed to 1080i
getModeList for port DVI
default ('1080i', 'Standard')
preferedmodes ['720p', '576p', '480p', '576i', '480i', ('1080i', 'Standard')]
[CrashlogAutoSubmit] - autostart
[CrashlogAutoSubmit] - getMailExchange
[CamdresetEveryDay] next reset: Sun Aug 21 23:45:55 2011 
No skin to read...
[InstallerUpdateCheck] timer changed
[InstallerUpdateCheck] next check at  Sun Aug 28 18:34:56 2011
[InstallerUpdateCheck] Check...
Looking for embedded skin
[Toplevel.importExternalModules] Could NOT import external module: AutoTimer
[Toplevel.importExternalModules] Exception Caught
No module named AutoTimer.AutoTimerResource
[Toplevel.importExternalModules] Could NOT import external module: EPGRefresh
[Toplevel.importExternalModules] Exception Caught
No module named EPGRefresh.EPGRefreshResource
[Toplevel.importExternalModules] Imported external module: Example
[WebInterface] checking for SSL Certificates
[Webinterface] started on 0.0.0.0:80 auth=False ssl=False
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[Webinterface] started on 0.0.0.0:443 auth=True ssl=True
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[4294766.937000] 3968 ms: 94 

[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[EPGC] time updated.. start EPG Mainloop
before: 1
after: 1
not showing fine-tuning wizard, config variable doesn't exist
showtestcard is false
Looking for embedded skin
[4294767.091000] 151 ms: 99 

setValue 50
[4294767.339000] set mute 0 (000) 1

cannot open /proc/stb/audio/j1_mute(No such file [4294767.347000] 253 ms: 99 

or directory)
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 50 50 (raw)
Setvolume: 32 32 (-1db)
[4294767.395000] 45 ms: 99 

nr_read 45 nr_write 14
sum 59 prev_sum 0
hdd was accessed since previous check!
[IDLE] 0 60 False
nr_read 45 nr_write 14
sum 59 prev_sum 59
hdd IDLE!
[IDLE] 0.0274369716644 60 False
nr_read 45 nr_write 14
sum 59 prev_sum 59
hdd IDLE!
[IDLE] 0.049204826355 60 False
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
RemovePopup, id = ZapError
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
main thread is non-idle! display spinner!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
playing 1:0:1:7034:41B:1:C00000:0:0:0:
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 041b:0001
opening frontend 0
[4294770.650000] alps_bsbe2 is in normal mode now

[eDVBCAService] new channel 0x1a458b0!
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 10744000 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 994 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:7034:41B:1:C00000:0:0:0:
allocate demux
resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
resolve: -> /etc/scan_tp_valid_check.py
nr_read 45 nr_write 14
sum 59 prev_sum 59
hdd IDLE!
[IDLE] 3.22895097733 60 False
[SEC] set static current limiting
set sequence pos 3
set sequence pos 4
[SEC] setVoltage 2
[SEC] sleep 200ms
child has terminated
pipes closed
child has terminated
pipes closed
[ePopen] command: route -n | grep  eth0
poll: unhandled POLLERR/HUP/NVAL for fd 27(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
poll: unhandled POLLERR/HUP/NVAL for fd 32(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 39(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 56(16)
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
got unsupported system from frontend! report as DVBS!
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
child has terminated
pipes closed
192.168
169.254
0.0.0.0
nameservers: [[192, 168, 1, 1]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1], 'address': [192, 168, 1, 5]}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 5], 'up': True, 'mac': '00:09:34:2a:2a:45', 'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
poll: unhandled POLLERR/HUP/NVAL for fd 29(16)
[CrashlogAutoSubmit] gotMXServer:  82.149.226.184
[CrashlogAutoSubmit] - mxServerFound --> 82.149.226.184
[CrashlogAutoSubmit] - no crashlogs found.
[SEC] sendDiseqc: e01038f2
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1, inversion off, m_tuning 2
(0)fe event: status 3, inversion off, m_tuning 3
(0)fe event: status 1f, inversion off, m_tuning 4
OURSTATE: ok
[eDVBCAService] channel 0x1a458b0 running
[eDVBLocalTimerHandler] channel 0x1a458b0 running
no version filtering
0014:  70 00 00 00 00 00
mask:  fc 00 00 00 00 00
mode:  00 00 00 00 00 00
[eEPGCache] channel 0x1a458b0 running
stop release channel timer
no version filtering
0012:  4e 70 34 00 00 00
mask:  ff ff ff 00 00 00
mode:  00 00 00 00 00 00
ok ... now we start!!
[EPGC] next update in 2 sec
no version filtering
0000:  00 00 00 00 00 00
mask:  ff 00 00 00 00 00
mode:  00 00 00 00 00 00
eventNewProgramInfo 0 0
have 1 video stream(s) (0191), and 1 audio stream(s) (0192), and the pcr pid is 0191, [4294772.865000] start pcr0 on dmx 0 pid:191 index 5

and the text pid is 0194
allocate demux
disable telete[4294772.875000] start audio on dmx 0 pid:192

xt[4294772.879000] audio xpt start

 s[4294772.882000] sync is off so we enable it

u[4294772.886000] demux-index 0 pcr0pid 191

bt[4294772.891000] using 5 as pcr0 pidchannel

itles
decoder state: play, vpid=401, apid=402
D[4294772.899000] MPEG

MX[4294772.901000] audio: streamtype set 0

_[4294772.905000] audio: streamtype_set: stop rave

SET_PES_FILTER(0x191) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x192) - audio - ok
DEMUX_START - audio - ok
A[4294772.921000] audio: streamtype_set: restart rave

UDI[4294772.926000] set mute 0 (111) 1

O_SET_BYPASS(1) - ok
AUD[4294772.934000] audio: decoder start 2

IO_PAUSE - ok
AUDIO_PLAY - [4294772.953000] video delay 0 (0 ms)

[4294772.956000] total video delay: 0 (0 ms)

ok
Video Device: /dev/dvb/ad[4294772.966000] start video0 on dmx 0 pid:191

ap[4294772.970000] total video delay: 0 (0 ms)

t[4294772.974000] ch0: lock

er0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x191) - video - ok
DEMUX_STA[4294772.988000] VIDEO0: start decode

RT - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x194) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
not pauseable.
[4294773.060000] RAP first pts 0x1bc5756c0, stc 0x1bc573b02, pcr valid

[AutoRes] service changed
[SEC] set dynamic current limiting
[4294773.389000] RAP sampling rate info isr

[4294773.393000] eBitRateChange Isr.. set source_changed_event!

[4294773.399000] eModeChange Isr.. set source_changed_event!

[4294773.452000] VIDEO0: first pts 0x1bc583662

[4294773.457000] VIDEO0: resolution changed (720 576)

[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
-+ 1/2 TID 4e
+ 1/1 TID 00
done!
PATready
use pmtpid 0190 for service_id 7034
no version filtering
0190:  02 70 34 00 00 00
mask:  ff ff ff 00 00 00
mode:  00 00 00 00 00 00
doing version filtering
0000:  00 00 00 09 00 00
mask:  ff 00 00 3f 00 00
mode:  00 00 00 3e 00 00
[4294773.614000] enable tsm0

VIDEO_GET_EVENT - ok
[AutoRes] got event evVideoSizeChanged
[4294773.992000] VIDEO0: progressive changed (0)

+ 1/1 TID 02
done!
eventNewProgramInfo 0 0
have 1 video stream(s) (0191), and 2 audio stream(s) (0192, 0193), and the pcr pid is 0191, and the text pid is 0194
decoder state: play, vpid=401, apid=402
[eDVBCAService] new service 1:0:1:7034:41B:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:7034:41B:1:C00000:0:0:0:
[eDVBCIInterfaces] gotPMT
demux 0 mask 01 prevhash 00000000
[eDVBCAService] send 59 bytes
9f 80 32 37 03 70 34 29 00 13 01 81 08 00 c0 00 00 04 1b 00 01 82 02 01 00 84 02 01 90 02 01 91 00 00 03 01 92 00 00 03 01 93 00 00 06 01 94 00 00 05 01 d6 00 00 0b 08 7b 00 00 
doing version filtering
0190:  02 70 34 29 00 00
mask:  ff ff ff 3f 00 00
mode:  00 00 00 3e 00 00
VIDEO_GET_EVENT - ok
[AutoRes] got event evFramerateChanged
[AutoRes] determineContent
++ 2/2 TID 4e
done!
[EPGC] start caching events(1313944506)
doing version filtering
0012:  4e 70 34 3b 00 00
mask:  ff ff ff 3f 00 00
mode:  00 00 00 3e 00 00
VIDEO_GET_EVENT - ok
[AutoRes] got event evVideoProgressiveChanged
sdt update done!
[AutoRes] determineContent
child has terminated
pipes closed
[InstallerUpdateCheck] No updates available
[InstallerUpdateCheck] next check at  Sun Aug 28 18:35:06 2011
poll: unhandled POLLERR/HUP/NVAL for fd 31(16)
nr_read 48 nr_write 16
sum 64 prev_sum 59
hdd was accessed since previous check!
[IDLE] 0 60 False
nr_read 48 nr_write 19
sum 67 prev_sum 64
hdd was accessed since previous check!
[IDLE] 0 60 False
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail viasat reading
[EPGC] abort non avail mhw reading
nr_read 48 nr_write 19
sum 67 prev_sum 67
hdd IDLE!
[IDLE] 6.00001311302 60 False
[EPGC] nownext finished(1313944522)
[EPGC] schedule finished(1313944522)
[EPGC] stop caching events(1313944522)
[EPGC] next update in 60 min
no ancillary data in audio stream... abort radiotext pes parser
nr_read 48 nr_write 19
sum 67 prev_sum 67
hdd IDLE!
[IDLE] 12.0000231266 60 False
nr_read 48 nr_write 21
sum 69 prev_sum 67
hdd was accessed since previous check!
[IDLE] 0 60 False
nr_read 48 nr_write 21
sum 69 prev_sum 69
hdd IDLE!
[IDLE] 6.00000286102 60 False