# gbox config file # Trace, Debug # xx yz ; xx=00 no konsole output # xx yz ; xx=01 konsole output # xx yz ; y=0 debug output (dont use) # xx yz ; y=1 no debug output # xx yz ; z=0 ouput to konsole # xx yz ; z=1 output to /var/tmp/debug.txt # xx yz ; z=2 Output to UDP (to capture with gboxt) Z: { 01 01 } 192.168.0.12 8024 # gbox working mode # 00 pure Emu # 01 pure SoftCam (when card inside), Emu (when no card inside) # 02 pure Net Client # 03 Mixed mode !!!!! always use this !!!!! G: { 03 } # Display ECM messages on Konsole # 00 dont show any ECMs # 01 show only valid ECMs # 02 show valid and bad ECMs with complete data display C: { 01 } # Display EMM messages on Konsole # 00 dont show any EMMs # 01 show only valid EMMs # 02 show valid and bad EMMs with complete data display # 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log M: { 01 } # Auto Update # 00 AU disable (default) # 01 AU enable # 02 AU auto # 03 AU enable with ua,sa and ga filter !!!!! always use this !!!!! A: { 03 } # Key Update # 01 update only new keys, default setting # 02 update all keys (used for valid PMK checking) U: { 01 } # Hash pids # 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF # 01 hash only pids with implemented algos and available keys !!!!! always use this H: { 01 } # Key files folder # 00 keyfiles in /var/keys # 01 keyfiles in /var/tmp T: { 00 } # On Screen Display for the Multysystemcam on com1/com2 # 00 No OSD (default) # 01 display Smartcard messages in Neutrino # 02 display Smartcard messages in Neutrino new nhttpd format # 03 display Smartcard messages in Enigma # 04 display Smartcard messages in Enigma2 O: { 00 } 192.168.0.12 dm900 # Logger and NET-mode UDP port Init # 00 do not init UDP port # 01 Init UDP port for IP, port, UDP L: { 00 } 192.168.0.12 dm900 # demux, multicam/comport configuration # example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line) # *x ** ; x = device nummber to be used (0= default) # D* ** ; force use of /proc/bus/gtx for cw write operations # (in the dbox2 the gbox writes directly the CWs, 00 is the # recommended mode ! No drivers are required) use D* ** ONLY if # you have Problems. 0* ** should be prefered !!! # F* ** ; write CWs in both devices (used for PVR in STB04xxx devices) # ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx) # ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx) # ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx) # ** *z ; z=0001b (0x*1) use com1 as Multicam # ** *z ; z=0010b (0x*2) use com2 as Multicam # ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams # ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams # ** *z ; z=0100b (0x*4) invert CTS detection on com1 # ** *z ; z=1000b (0x*8) invert CTS detection on com2 V: { 00 10 } #Slot 1 #V: { 00 20 } #Slot 2 #V: { 00 30 } #Slot 1+2 #V: { 00 3F } #Slot 1+2+SC8in1 # RS232 SSSP mode # x debug messages, 1=on, 0=off # y com port to use (0=none, 1=com1, 2=com2) #R: { 00 } 9600 # Task type # 00 ** normal mode gbox mode (no season, use Multicam instead) # 01 ** Season Emulation in a Irdeto allcam chid 0602 nonZ # 10 ** Season Emulation in a Irdeto allcam chid 1702 nonZ # 11 ** Season Emulation in a Irdeto allcam chid 1702 Z # 12 ** Season Emulation in a Irdeto allcam chid 1722 Z # 13 ** Season Emulation in a Irdeto allcam chid 1762 Z # ** *1 Com port to use for season emulatiom (1 or 2) # ** 0* Use CTS for RST detection # ** 1* Use DCD for RST detection # ** ** 9600 = Baudrate to be used (working only on dbox2) #W: { 00 00 } 9600 W: { 00 00 } # ============================================================================= # extra options to override default setting in case you expirience Problems, # normaly these setings are not required. # Files, folders, devices # folder/device comment F: { 01 } /tmp/pmt.tmp // pmt file F: { 02 } /tmp/emm.info // key update log file F: { 03 } /tmp/ecm.info // ecm info file F: { 04 } /tmp/atack.txt // atack info file F: { 08 } 1 // pmt mode (0 - pmt file mode, 1 - pmt socket mode) F: { 11 } /var/keys // folder for config files F: { 12 } /tmp // folder for temporary file #F: { 13 } /var/tmp // folder for keyfiles F: { 21 } /dev/dvb/adapter0/ca0 // ca device F: { 22 } /dev/dvb/adapter0/dvr0 // dvr device F: { 23 } /dev/dvb/adapter0/demux0 // demux device #F: { 31 } /dev/null // second ca device to write cw's (recording) F: { 41 } /dev/sci0 // STB04xxx slot1 #F: { 42 } /dev/sci1 // STB04xxx slot1 #F: { 43 } /dev/tts/0 // rs232 com1 #F: { 44 } /dev/tts/1 // rs232 com2 #F: { 43 } /dev/ttyUSB0 // rs232 com1# f?r externen Cardreader an com1 SC8in1 oder MCR 4/8 oder Smargo #F: { 44 } /dev/ttyUSB1 // rs232 com2# f?r externen Cardreader an com2 SC8in1 oder MCR 4/8 oder Smargo # For overclocking freaks, Clocking internal STB04xxx slots with: # 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz # Irdeto works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz # The Dream has not a clean clock signal, some cards that are sensitive will # refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there. # On other STB04xxx recievers the same cards work with 6.30MHz # Ist nicht Aktiv geschaltet ,also keine Funktion #F: { 51 } 02 // irdeto #F: { 52 } 03 // seca #F: { 53 } 03 // viaccess #F: { 54 } 03 // nagra #F: { 55 } 03 // crypto #F: { 57 } 03 // conax #F: { 58 } 03 // nds # force a name change of the season or sssp rs232 device #F: { 45 } /dev/ttyS1 # set stay alive ping time in seconds (default is 300) #F: { A0 } 300 # disable direct serial port I/O access on 80x86cpus (win and linux) # direct port i/o is used to set unusual Baudrates, if you want to # a 3.579MHz card in a 6.000MHz reader etc ... # # Enabled (A1=0) is the default setting, has always been !!! # # Disable (set to 1) it ONLY if you have problems with ioperm or you want # to use a usb-to-rs232 smartcard reader #F: { A1 } 1 # descrambler selection by camd.socket private descriptor (0 - index mode, 1 - mask mode), mask mode is default F: { AA } 1