[    0.294204] usb usb6: Product: BRCM OHCI controller
[    0.294208] usb usb6: Manufacturer: Linux 3.14-1.17-dm920 ohci_hcd
[    0.294212] usb usb6: SerialNumber: f0470600.ohci_v2
[    0.294479] hub 6-0:1.0: USB hub found
[    0.294500] hub 6-0:1.0: 1 port detected
[    0.294739] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.294743] ehci-pci: EHCI PCI platform driver
[    0.294784] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.294788] ohci-pci: OHCI PCI platform driver
[    0.294906] usbcore: registered new interface driver usb-storage
[    0.294911] i2c /dev entries driver
[    0.294955] lirc_dev: IR Remote Control driver registered, major 250 
[    0.295278] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
[    0.295381] usbcore: registered new interface driver btusb
[    0.295438] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    0.295607] brcmstb-cpufreq: probe of f03e257c.cpu-clk-div failed with error -17
[    0.295681] sdhci: Secure Digital Host Controller Interface driver
[    0.295684] sdhci: Copyright(c) Pierre Ossman
[    0.295687] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.296783] mmc0: no vqmmc regulator found
[    0.296788] mmc0: no vmmc regulator found
[    0.327092] mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
[    0.328156] mmc1: no vqmmc regulator found
[    0.328160] mmc1: no vmmc regulator found
[    0.358084] mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
[    0.358195] hidraw: raw HID events driver (C) Jiri Kosina
[    0.358274] usbcore: registered new interface driver usbhid
[    0.358277] usbhid: USB HID core driver
[    0.360511] TCP: cubic registered
[    0.360567] NET: Registered protocol family 10
[    0.363000] NET: Registered protocol family 17
[    0.363910] Bluetooth: RFCOMM TTY layer initialized
[    0.363921] Bluetooth: RFCOMM socket layer initialized
[    0.363925] Bluetooth: RFCOMM ver 1.11
[    0.363930] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    0.363933] Bluetooth: BNEP filters: protocol multicast
[    0.363940] Bluetooth: BNEP socket layer initialized
[    0.363943] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    0.363949] Bluetooth: HIDP socket layer initialized
[    0.363996] l2tp_core: L2TP core driver, V2.0
[    0.364018] Key type dns_resolver registered
[    0.364109] Registering SWP/SWPB emulation handler
[    0.364359] regulator-dummy: disabling
[    0.364617] ALSA device list:
[    0.364623]   No soundcards found.
[    0.364673] Warning: unable to open an initial console.
[    0.364728] Waiting for root device /dev/mmcblk0p2...
[    0.425725] mmc1: BKOPS_EN bit is not set
[    0.432093] mmc1: new high speed MMC card at address 0001
[    0.432302] mmcblk0: mmc1:0001 8GME4R 7.28 GiB 
[    0.432398] mmcblk0boot0: mmc1:0001 8GME4R partition 1 4.00 MiB
[    0.432495] mmcblk0boot1: mmc1:0001 8GME4R partition 2 4.00 MiB
[    0.432577] mmcblk0rpmb: mmc1:0001 8GME4R partition 3 512 KiB
[    0.435423]  mmcblk0: p1 p2 p3
[    0.436481]  mmcblk0boot1: unknown partition table
[    0.436948]  mmcblk0boot0: unknown partition table
[    0.470085] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    0.470114] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    0.471332] devtmpfs: mounted
[    0.585643] random: systemd: uninitialized urandom read (16 bytes read, 44 bits of entropy available)
[    0.588778] systemd[1]: systemd 230 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    0.589005] systemd[1]: Detected architecture arm.
[    0.590632] systemd[1]: Set hostname to <dm920>.
[    0.603115] random: systemd: uninitialized urandom read (16 bytes read, 49 bits of entropy available)
[    0.607944] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 50 bits of entropy available)
[    0.618884] systemd-fstab-generator[77]: Checking was requested for "rootfs", but it is not a device.
[    0.622703] random: systemd: uninitialized urandom read (16 bytes read, 52 bits of entropy available)
[    0.622802] random: systemd: uninitialized urandom read (16 bytes read, 52 bits of entropy available)
[    0.623043] random: systemd: uninitialized urandom read (16 bytes read, 52 bits of entropy available)
[    0.623195] random: systemd: uninitialized urandom read (16 bytes read, 52 bits of entropy available)
[    0.623416] random: systemd: uninitialized urandom read (16 bytes read, 52 bits of entropy available)
[    0.628494] random: systemd: uninitialized urandom read (16 bytes read, 54 bits of entropy available)
[    0.630995] random: systemd: uninitialized urandom read (16 bytes read, 54 bits of entropy available)
[    0.686163] systemd[1]: Reached target Swap.
[    0.686395] systemd[1]: Reached target Host and Network Name Lookups.
[    0.686548] systemd[1]: Listening on udev Control Socket.
[    0.686778] systemd[1]: Listening on udev Kernel Socket.
[    0.687206] systemd[1]: Created slice System Slice.
[    0.688441] systemd[1]: Starting Generate environment for enigma2...
[    0.688831] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    0.689117] systemd[1]: Created slice User and Session Slice.
[    0.689173] systemd[1]: Reached target Slices.
[    0.689376] systemd[1]: Listening on Journal Socket.
[    0.690915] systemd[1]: Mounting POSIX Message Queue File System...
[    0.700955] systemd[1]: Starting Load Kernel Modules...
[    0.702624] systemd[1]: Starting Remount Root and Kernel File Systems...
[    0.704655] systemd[1]: Starting Setup Virtual Console...
[    0.708793] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    0.708900] systemd[1]: Reached target Paths.
[    0.709278] systemd[1]: Listening on Journal Socket (/dev/log).
[    0.709424] systemd[1]: Listening on Syslog Socket.
[    0.710963] systemd[1]: Starting Journal Service...
[    0.715920] systemd[1]: Mounted POSIX Message Queue File System.
[    0.738420] systemd[1]: Started Setup Virtual Console.
[    0.741167] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    0.750781] stb_core: module license 'Proprietary' taints kernel.
[    0.750794] Disabling lock debugging due to kernel taint
[    0.760407] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    0.764764] systemd[1]: Started Remount Root and Kernel File Systems.
[    0.766492] systemd[1]: Starting Create System Users...
[    0.776834] systemd[1]: Starting Rebuild Hardware Database...
[    0.797863] systemd[1]: Started Rebuild Hardware Database.
[    0.799650] systemd[1]: Starting udev Coldplug all Devices...
[    0.801009] input: dreambox remote control (native) as /devices/virtual/input/input0
[    0.801422] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
[    0.807246] systemd[1]: Started Generate environment for enigma2.
[    0.823373] systemd[1]: Started Create System Users.
[    0.825265] systemd[1]: Starting Create Static Device Nodes in /dev...
[    0.849507] systemd[1]: Started Journal Service.
[    1.037567] bcm7439: xvd 20160630, vdc 20160630, rap 20160630, xpt 20160630, driver version 20181127-dm920
[    1.048180] systemd-journald[87]: Received request to flush runtime journal from PID 1
[    1.196920] random: nonblocking pool is initialized
[    1.653504] systemd-fstab-generator[161]: Checking was requested for "rootfs", but it is not a device.
[    1.653961] 1:652887963 SMCB: controller reset timed out
[    2.028613] register adapter
[    2.028874] register adapter
[    2.029122] register adapter
[    2.029369] register adapter
[    2.029580] register adapter
[    2.029745] fpga init
[    4.074102] fpga prog done
[    4.079409] using fpga version 47
[    4.079990] swd: status is 0, pls check
[    4.079994] swd: cannot init port
[    4.079998] ble module not found
[    4.080001] FP did not respond
[    4.080198] input: dreambox front panel as /devices/virtual/input/input2
[    4.080949] HDMI: CEC start ... state is now 1
[    4.081350] set input to 0
[    4.081358] set fb to 2(-1)
[    4.082536] fallback to startvideomode '720p50'
[    4.083217] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
[    4.150277] HDMI: now connected
[    4.178721] HDMI: CEC Physical Addr 1.0.0.0 set from EDID
[    4.178727] HDMI: EDID read ok
[    4.178732] HDMI: initial mode set!
[    4.178739] using 50.00Hz as MonitorRefreshRate
[    4.178744] SET FORMAT: display[0], format='720p50'
[    4.178753] HDMI mode
[    4.178758] use EDID to detect colorspace
[    4.178762] preferred colorspace: Itu_R_BT_709
[    4.178765] using 8bit output
[    4.311190] HDMI: CEC use logical address 3
[    4.311225] HDMI: CEC init completed... state is now 3!
[    4.450500] HDMI: CEC send ok!
[    4.627284] VIDEO0: enable deinterlacer
[    4.627395] VIDEO0: set fallback framerate to 60000
[    4.627406] VIDEO0: set progressive override mode to 1
[    4.627411] VIDEO0: set streamtype!
[    4.627417] ->      set MPEG2
[    4.627419] ->      sw rave disabled!
[    4.711841] VIDEO1: set fallback framerate to 60000
[    4.711858] VIDEO1: set progressive override mode to 1
[    4.711862] VIDEO1: set streamtype!
[    4.711868] ->      set MPEG2
[    4.711871] ->      sw rave disabled!
[    4.747422] VIDEO2: set fallback framerate to 60000
[    4.747432] VIDEO2: set progressive override mode to 1
[    4.747436] VIDEO2: set streamtype!
[    4.747441] ->      set MPEG2
[    4.747444] ->      sw rave disabled!
[    4.760365] set ac3 to downmix
[    4.760379] set wmapro to downmix
[    4.760387] set ac3plus to use_hdmi_caps
[    4.760397] set dtshd to force_dts
[    4.760405] set aac to downmix
[    4.760736] audio ch2: add stereo (background decoder) input to mixer DUMMY2
[    4.760776] audio ch1: add stereo (hdmi-rx) input to mixer DUMMY
[    4.761107] DVB: registering new adapter (BCM7439)
[    4.927669] autodetecting NIMs...
[    4.930151] Found: Slot 0, ID: 1f (by CA)
[    4.930163] Found: Slot 1, ID: 1f (by CA)
[    4.930171] Initializing adapter 0 (BCM45308X-DVB-S2)
[    4.930913] bcm45208(0): chipid register is 45308
[    4.934154] bcm45308(0): opening 8 sat channels (demods)
[    4.934202] (NULL device *): DVB: registering adapter 0 frontend 0 (BCM45208)...
[    4.934292] bcm45308(0): InitAP
[    4.934539] Initializing adapter 1 (BCM45308X-DVB-S2)
[    4.934564] (NULL device *): DVB: registering adapter 0 frontend 1 (BCM45208)...
[    4.934722] Initializing adapter 2 (BCM45308X-DVB-S2)
[    4.934746] (NULL device *): DVB: registering adapter 0 frontend 2 (BCM45208)...
[    4.934857] Initializing adapter 3 (BCM45308X-DVB-S2)
[    4.934880] (NULL device *): DVB: registering adapter 0 frontend 3 (BCM45208)...
[    4.934994] Initializing adapter 4 (BCM45308X-DVB-S2)
[    4.935020] (NULL device *): DVB: registering adapter 0 frontend 4 (BCM45208)...
[    4.935831] Initializing adapter 5 (BCM45308X-DVB-S2)
[    4.935870] (NULL device *): DVB: registering adapter 0 frontend 5 (BCM45208)...
[    4.936052] Initializing adapter 6 (BCM45308X-DVB-S2)
[    4.936064] (NULL device *): DVB: registering adapter 0 frontend 6 (BCM45208)...
[    4.936460] Initializing adapter 7 (BCM45308X-DVB-S2)
[    4.936483] (NULL device *): DVB: registering adapter 0 frontend 7 (BCM45208)...
[    4.936630] Initializing adapter 8 (BCM45308X-DVB-S2)
[    4.937531] bcm45208(0): chipid register is 45308
[    4.940732] bcm45308(0): opening 8 sat channels (demods)
[    4.940771] (NULL device *): DVB: registering adapter 0 frontend 8 (BCM45208)...
[    4.940942] Initializing adapter 9 (BCM45308X-DVB-S2)
[    4.940966] (NULL device *): DVB: registering adapter 0 frontend 9 (BCM45208)...
[    4.941128] Initializing adapter 10 (BCM45308X-DVB-S2)
[    4.941148] (NULL device *): DVB: registering adapter 0 frontend 10 (BCM45208)...
[    4.941717] Initializing adapter 11 (BCM45308X-DVB-S2)
[    4.941740] (NULL device *): DVB: registering adapter 0 frontend 11 (BCM45208)...
[    4.941872] Initializing adapter 12 (BCM45308X-DVB-S2)
[    4.941893] (NULL device *): DVB: registering adapter 0 frontend 12 (BCM45208)...
[    4.941981] Initializing adapter 13 (BCM45308X-DVB-S2)
[    4.941996] (NULL device *): DVB: registering adapter 0 frontend 13 (BCM45208)...
[    4.942479] Initializing adapter 14 (BCM45308X-DVB-S2)
[    4.942504] (NULL device *): DVB: registering adapter 0 frontend 14 (BCM45208)...
[    4.942637] Initializing adapter 15 (BCM45308X-DVB-S2)
[    4.942651] (NULL device *): DVB: registering adapter 0 frontend 15 (BCM45208)...
[    4.953225] CI stopped...
[    4.954864] init ALSA!
[    4.955456] registered vtuner misc/vtuner0, minor 49
[    4.955551] registered vtuner misc/vtuner1, minor 48
[    4.955638] registered vtuner misc/vtuner2, minor 47
[    4.955725] registered vtuner misc/vtuner3, minor 46
[    4.955734] HDMI-RX: init
[    4.956596] HDMI-RX: no device attached
[    4.956647] HDMI-RX: video format change event
[    4.956651] HDMI-RX: hdmi packet status stopped
[    4.956657] HDMI-RX: hdmiInput0 Receiving DVI  format 
[    4.956660] HDMI-RX: hdmiInput0 Color Space change from '' to ''
[    4.956693] HDMI-RX: init done
[    4.956699] bcm_vce_init()
[    4.956703] bcm_vce_init() 0
[    4.958950] CI stopped...
[    4.967221] bcm45308(0): InitAP
[    4.990544] vice0: allocate output buffers
[    4.998972] input: dreambox ir keyboard as /devices/virtual/input/input3
[    4.999739] input: dreambox ir mouse as /devices/virtual/input/input4
[    5.003625] ble init (0)
[    5.003996] input: dreambox remote control (bluetooth le) as /devices/virtual/input/input5
[    5.012538] fuse init (API version 7.22)
[    5.027347] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    5.058919] VIDEO0: set blank to 0
[    5.059136] sync0 is off so we enable it
[    5.059148] sync0: allocated pcroffset 0
[    5.059161] sync0: playback!
[    5.059188] VIDEO0: total delay: 0 (0 ms)
[    5.064162] VIDEO0: start decode
[    5.064190] VIDEO0: flush video decoder
[    5.064197] VIDEO0 got pts failed !!!! (ret 0)
[    5.083411] VIDEO0: first pts 0x0
[    5.083440] VIDEO0: EOTF changed to SDR
[    5.083447] VIDEO0: framerate changed 3
[    5.083453] VIDEO0: resolution changed (1280 720)
[    5.083458] VIDEO0: aspect changed 3
[    5.083632] set current avs auto aspect to 16:9
[    5.083653] set current avs auto aspect to 16:9
[    5.083704] set sb to 3(1)
[    5.222356] VIDEO0: stop decode
[    5.222377] sync0 1fff no decoder left in sync handling so disable
[    5.222386] sync0: was last pcroffset0 user so free it
[    5.271141] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.309203] ata1.00: ATA-9: ST4000LM016-1N2170, 0003, max UDMA/133
[    5.309216] ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    5.349125] ata1.00: configured for UDMA/133
[    5.349412] scsi 0:0:0:0: Direct-Access     ATA      ST4000LM016-1N21 0003 PQ: 0 ANSI: 5
[    5.350228] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[    5.350242] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    5.350512] sd 0:0:0:0: [sda] Write Protect is off
[    5.350524] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.350605] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.452815]  sda: sda1 sda2
[    5.454233] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.462348] ata2: SATA link down (SStatus 0 SControl 300)
[    5.544127] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
[    5.546360] f0b00000.ethernet: configuring instance for internal PHY
[    5.546456] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.551195] libphy: f0b00000.etherne:01 - Link is Down
[    8.997262] libphy: f0b00000.etherne:01 - Link is Up - 1000/Full
[    8.997291] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   12.837860] bcm45308(0): Info Id: 6 Type: 0 Version: 11.2
[   12.839584] bcm45308(0): Info Id: 6 Type: 0 Version: 11.2
[   12.859312] bcm45308(0): FW Id: 11 Type: 0 Version 1.8
[   12.859320] bcm45308(0): opening 2 wfe channels (input adcs)
[   12.859328] bcm45308(0): opening 2 dsq channels (DiSEqC)
[   12.859333] bcm45308(0): init lnb_ctrl 0
[   12.859658] bcm45308(0): init lnb_ctrl 1
[   12.863117] bcm45308(0): FW Id: 11 Type: 0 Version 1.8
[   12.863125] bcm45308(0): opening 2 wfe channels (input adcs)
[   12.863144] bcm45308(0): opening 2 dsq channels (DiSEqC)
[   12.863151] bcm45308(0): init lnb_ctrl 0
[   12.863476] bcm45308(0): init lnb_ctrl 1
[   12.914696] bcm45308(0): init MTSIF
[   12.919605] bcm45308(0): init MTSIF
[   13.494450] input0 set to A1
[   13.494463] input1 set to A2
[   13.494486] input2 set to A3
[   13.494494] input3 set to A4
[   13.494501] input4 set to A5
[   13.494508] input5 set to A6
[   13.494514] input6 set to A7
[   13.494521] input7 set to A8
[   13.494529] input8 set to B1
[   13.494535] input9 set to B2
[   13.494543] input10 set to B3
[   13.494551] input11 set to B4
[   13.494559] input12 set to B5
[   13.494581] input13 set to B6
[   13.494590] input14 set to B7
[   13.494600] input15 set to B8
[   13.494625] tsmux set cisource reg 06 to val 02
[   13.495004] tsmux set ciclk reg 34 to val 00
[   13.498221] tsmux set cisource reg 07 to val 05
[   13.498625] tsmux set ciclk reg 34 to val 00
[   13.557695] bcm45308(0): enabled diseqc and wfe 0
[   13.568879] bcm45308(0): in normal mode now
[   13.568885] bcm45308(0): rf input 0 used
[   13.604077] bcm45308(1): in normal mode now
[   13.604085] bcm45308(1): rf input 0 used
[   13.761042] bcm45308(0): sleeping now
[   13.791248] bcm45308(1): disabled diseqc and wfe 0
[   13.802337] bcm45308(1): sleeping now
[   13.826667] bcm45308(2): enabled diseqc and wfe 0
[   13.837813] bcm45308(2): in normal mode now
[   13.837817] bcm45308(2): rf input 0 used
[   13.849896] bcm45308(3): in normal mode now
[   13.849903] bcm45308(3): rf input 0 used
[   13.875025] bcm45308(2): sleeping now
[   13.886768] bcm45308(4): in normal mode now
[   13.886774] bcm45308(4): rf input 0 used
[   13.911595] bcm45308(3): sleeping now
[   13.923226] bcm45308(5): in normal mode now
[   13.923232] bcm45308(5): rf input 0 used
[   13.948047] bcm45308(4): sleeping now
[   13.959651] bcm45308(6): in normal mode now
[   13.959657] bcm45308(6): rf input 0 used
[   13.981846] bcm45308(5): sleeping now
[   13.992997] bcm45308(7): in normal mode now
[   13.993003] bcm45308(7): rf input 0 used
[   14.015283] bcm45308(6): sleeping now
[   14.018881] bcm45308(0): enabled diseqc and wfe 0
[   14.030698] bcm45308(0): in normal mode now
[   14.030705] bcm45308(0): rf input 0 used
[   14.045791] bcm45308(7): disabled diseqc and wfe 0
[   14.056899] bcm45308(7): sleeping now
[   14.061906] bcm45308(0): disabled diseqc and wfe 0
[   14.073003] bcm45308(0): sleeping now
[   14.097688] bcm45308(1): enabled diseqc and wfe 0
[   14.108862] bcm45308(1): in normal mode now
[   14.108866] bcm45308(1): rf input 0 used
[   14.142261] bcm45308(1): disabled diseqc and wfe 0
[   14.153436] bcm45308(1): sleeping now
[   14.177693] bcm45308(2): enabled diseqc and wfe 0
[   14.188840] bcm45308(2): in normal mode now
[   14.188845] bcm45308(2): rf input 0 used
[   14.222207] bcm45308(2): disabled diseqc and wfe 0
[   14.233335] bcm45308(2): sleeping now
[   14.257702] bcm45308(3): enabled diseqc and wfe 0
[   14.268856] bcm45308(3): in normal mode now
[   14.268861] bcm45308(3): rf input 0 used
[   14.302274] bcm45308(3): disabled diseqc and wfe 0
[   14.313456] bcm45308(3): sleeping now
[   14.337700] bcm45308(4): enabled diseqc and wfe 0
[   14.348889] bcm45308(4): in normal mode now
[   14.348895] bcm45308(4): rf input 0 used
[   14.382259] bcm45308(4): disabled diseqc and wfe 0
[   14.393737] bcm45308(4): sleeping now
[   14.418695] bcm45308(5): enabled diseqc and wfe 0
[   14.429889] bcm45308(5): in normal mode now
[   14.429895] bcm45308(5): rf input 0 used
[   14.464515] bcm45308(5): disabled diseqc and wfe 0
[   14.476236] bcm45308(5): sleeping now
[   14.500826] bcm45308(6): enabled diseqc and wfe 0
[   14.512490] bcm45308(6): in normal mode now
[   14.512496] bcm45308(6): rf input 0 used
[   14.525032] bcm45308(7): in normal mode now
[   14.525039] bcm45308(7): rf input 0 used
[   14.533252] HDMI: CEC device open ... state is 3, flushed 0 old messages from RX fifo
[   14.533449] HDMI: CEC set devtype to 0
[   14.533458] HDMI: CEC start ... state is now 1
[   14.533498] HDMI: CEC returned state 1
[   14.533501] HDMI: CEC state now 801
[   14.548316] bcm45308(6): sleeping now
[   14.582483] bcm45308(7): disabled diseqc and wfe 0
[   14.594063] bcm45308(7): sleeping now
[   14.596415] HDMI: CEC use logical address 3
[   14.596434] HDMI: CEC init completed... state is now 3!
[   14.616772] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
[   14.733216] HDMI: CEC send ok!
[   15.600793] tsmux set cisource reg 06 to val 02
[   15.601412] tsmux set cisource reg 07 to val 05
[   16.744066] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   17.106760] systemd-fstab-generator[430]: Checking was requested for "rootfs", but it is not a device.
[   17.316763] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[   17.585205] change audioenc bitrate to 256000 bits/s
[   17.587065] vice0: change videoenc bitrate to 6000000 bits/s
[   17.587487] change audioenc bitrate to 128000 bits/s
[   17.589760] vice0: change gop length to 0ms
[   17.589781] vice0: allow new gop on new scene off
[   17.589790] vice0: change open gop to off
[   17.589796] vice0: change p-frames to 4
[   17.589803] vice0: change b-frames to 2
[   17.589810] vice0: change to 0 slices per pic
[   17.589873] vice0: change h264 profile to main
[   17.589882] vice0: change h264 level to 3.1
[   21.420450] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
[   95.350884] sync0 is off so we enable it
[   95.350897] sync0: allocated pcroffset 0
[   95.350910] sync0: playback!
[   95.350935] VIDEO0: total delay: 0 (0 ms)
[   95.355791] VIDEO0: start decode
[   95.355820] VIDEO0: flush video decoder
[   95.380067] VIDEO0: first pts 0x0
[   95.512434] VIDEO0: stop decode
[   95.512449] sync0 1fff no decoder left in sync handling so disable
[   95.512454] sync0: was last pcroffset0 user so free it
[   95.868800] bcm45308(0): enabled diseqc and wfe 0
[   95.880464] bcm45308(0): in normal mode now
[   95.880472] bcm45308(0): rf input 0 used
[   95.913203] bcm45308(0): disabled diseqc and wfe 0
[   95.924867] bcm45308(0): sleeping now
[   95.949799] bcm45308(1): enabled diseqc and wfe 0
[   95.961397] bcm45308(1): in normal mode now
[   95.961403] bcm45308(1): rf input 0 used
[   95.993914] bcm45308(1): disabled diseqc and wfe 0
[   96.005561] bcm45308(1): sleeping now
[   96.030801] bcm45308(2): enabled diseqc and wfe 0
[   96.042373] bcm45308(2): in normal mode now
[   96.042378] bcm45308(2): rf input 0 used
[   96.074821] bcm45308(2): disabled diseqc and wfe 0
[   96.086394] bcm45308(2): sleeping now
[   96.111802] bcm45308(3): enabled diseqc and wfe 0
[   96.123411] bcm45308(3): in normal mode now
[   96.123416] bcm45308(3): rf input 0 used
[   96.155874] bcm45308(3): disabled diseqc and wfe 0
[   96.167513] bcm45308(3): sleeping now
[   96.192821] bcm45308(4): enabled diseqc and wfe 0
[   96.204447] bcm45308(4): in normal mode now
[   96.204453] bcm45308(4): rf input 0 used
[   96.236824] bcm45308(4): disabled diseqc and wfe 0
[   96.248390] bcm45308(4): sleeping now
[   96.273802] bcm45308(5): enabled diseqc and wfe 0
[   96.285420] bcm45308(5): in normal mode now
[   96.285424] bcm45308(5): rf input 0 used
[   96.317805] bcm45308(5): disabled diseqc and wfe 0
[   96.329411] bcm45308(5): sleeping now
[   96.354797] bcm45308(6): enabled diseqc and wfe 0
[   96.366365] bcm45308(6): in normal mode now
[   96.366370] bcm45308(6): rf input 0 used
[   96.398751] bcm45308(6): disabled diseqc and wfe 0
[   96.410325] bcm45308(6): sleeping now
[   96.435798] bcm45308(7): enabled diseqc and wfe 0
[   96.447397] bcm45308(7): in normal mode now
[   96.447402] bcm45308(7): rf input 0 used
[   96.472845] bcm45308(0): enabled diseqc and wfe 0
[   96.480677] bcm45308(7): disabled diseqc and wfe 0
[   96.484703] bcm45308(0): in normal mode now
[   96.484707] bcm45308(0): rf input 0 used
[   96.493091] bcm45308(7): sleeping now
[   96.519891] bcm45308(0): disabled diseqc and wfe 0
[   96.531636] bcm45308(0): sleeping now
[   96.555829] bcm45308(1): enabled diseqc and wfe 0
[   96.567474] bcm45308(1): in normal mode now
[   96.567479] bcm45308(1): rf input 0 used
[   96.579927] bcm45308(2): in normal mode now
[   96.579933] bcm45308(2): rf input 0 used
[   96.604041] bcm45308(1): sleeping now
[   96.635913] bcm45308(2): disabled diseqc and wfe 0
[   96.647578] bcm45308(2): sleeping now
[   96.671828] bcm45308(3): enabled diseqc and wfe 0
[   96.683549] bcm45308(3): in normal mode now
[   96.683555] bcm45308(3): rf input 0 used
[   96.695928] bcm45308(4): in normal mode now
[   96.695935] bcm45308(4): rf input 0 used
[   96.719896] bcm45308(3): sleeping now
[   96.751802] bcm45308(4): disabled diseqc and wfe 0
[   96.763449] bcm45308(4): sleeping now
[   96.787827] bcm45308(5): enabled diseqc and wfe 0
[   96.799480] bcm45308(5): in normal mode now
[   96.799485] bcm45308(5): rf input 0 used
[   96.811997] bcm45308(6): in normal mode now
[   96.812004] bcm45308(6): rf input 0 used
[   96.835935] bcm45308(5): sleeping now
[   96.867762] bcm45308(6): disabled diseqc and wfe 0
[   96.879422] bcm45308(6): sleeping now
[   96.903837] bcm45308(7): enabled diseqc and wfe 0
[   96.915506] bcm45308(7): in normal mode now
[   96.915511] bcm45308(7): rf input 0 used
[   96.917134] HDMI: CEC device open ... state is 3, flushed 0 old messages from RX fifo
[   96.917223] HDMI: CEC set devtype to 0
[   96.917233] HDMI: CEC start ... state is now 1
[   96.917265] HDMI: CEC returned state 1
[   96.917269] HDMI: CEC state now 801
[   96.955795] bcm45308(7): disabled diseqc and wfe 0
[   96.967004] bcm45308(7): sleeping now
[   96.980193] HDMI: CEC use logical address 3
[   96.980239] HDMI: CEC init completed... state is now 3!
[   97.068892] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
[   97.117003] HDMI: CEC send ok!
[   97.578884] tsmux set cisource reg 06 to val 02
[   97.580439] tsmux set cisource reg 07 to val 05
[   98.101226] change audioenc bitrate to 256000 bits/s
[   98.102025] vice0: change videoenc bitrate to 6000000 bits/s
[   98.102039] change audioenc bitrate to 128000 bits/s
[   98.109758] vice0: change gop length to 0ms
[   98.109772] vice0: allow new gop on new scene off
[   98.109780] vice0: change open gop to off
[   98.109785] vice0: change p-frames to 4
[   98.109792] vice0: change b-frames to 2
[   98.109797] vice0: change to 0 slices per pic
[   98.109868] vice0: change h264 profile to main
[   98.109878] vice0: change h264 level to 3.1
[   99.479115] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
[  185.510222] sync0 is off so we enable it
[  185.510234] sync0: allocated pcroffset 0
[  185.510245] sync0: playback!
[  185.510271] VIDEO0: total delay: 0 (0 ms)
[  185.515157] VIDEO0: start decode
[  185.515190] VIDEO0: flush video decoder
[  185.540060] VIDEO0: first pts 0x0
[  185.671693] VIDEO0: stop decode
[  185.671709] sync0 1fff no decoder left in sync handling so disable
[  185.671713] sync0: was last pcroffset0 user so free it
[  185.990798] bcm45308(0): enabled diseqc and wfe 0
[  186.002606] bcm45308(0): in normal mode now
[  186.002613] bcm45308(0): rf input 0 used
[  186.015372] bcm45308(1): in normal mode now
[  186.015379] bcm45308(1): rf input 0 used
[  186.039873] bcm45308(0): sleeping now
[  186.050994] bcm45308(2): in normal mode now
[  186.051000] bcm45308(2): rf input 0 used
[  186.077219] bcm45308(1): sleeping now
[  186.088375] bcm45308(3): in normal mode now
[  186.088381] bcm45308(3): rf input 0 used
[  186.113679] bcm45308(2): sleeping now
[  186.125256] bcm45308(4): in normal mode now
[  186.125261] bcm45308(4): rf input 0 used
[  186.148912] bcm45308(3): sleeping now
[  186.159941] bcm45308(5): in normal mode now
[  186.159947] bcm45308(5): rf input 0 used
[  186.183903] bcm45308(4): sleeping now
[  186.195481] bcm45308(6): in normal mode now
[  186.195488] bcm45308(6): rf input 0 used
[  186.220449] bcm45308(5): sleeping now
[  186.231500] bcm45308(7): in normal mode now
[  186.231506] bcm45308(7): rf input 0 used
[  186.256482] bcm45308(6): sleeping now
[  186.256880] bcm45308(0): enabled diseqc and wfe 0
[  186.268722] bcm45308(0): in normal mode now
[  186.268729] bcm45308(0): rf input 0 used
[  186.281347] bcm45308(1): in normal mode now
[  186.281354] bcm45308(1): rf input 0 used
[  186.292397] bcm45308(7): disabled diseqc and wfe 0
[  186.303421] bcm45308(7): sleeping now
[  186.305705] bcm45308(0): sleeping now
[  186.317382] bcm45308(2): in normal mode now
[  186.317388] bcm45308(2): rf input 0 used
[  186.342360] bcm45308(1): sleeping now
[  186.354148] bcm45308(3): in normal mode now
[  186.354153] bcm45308(3): rf input 0 used
[  186.379117] bcm45308(2): sleeping now
[  186.390898] bcm45308(4): in normal mode now
[  186.390905] bcm45308(4): rf input 0 used
[  186.415776] bcm45308(3): sleeping now
[  186.427481] bcm45308(5): in normal mode now
[  186.427487] bcm45308(5): rf input 0 used
[  186.452396] bcm45308(4): sleeping now
[  186.464217] bcm45308(6): in normal mode now
[  186.464223] bcm45308(6): rf input 0 used
[  186.490913] bcm45308(5): sleeping now
[  186.521643] bcm45308(6): disabled diseqc and wfe 0
[  186.533094] bcm45308(6): sleeping now
[  186.557827] bcm45308(7): enabled diseqc and wfe 0
[  186.569526] bcm45308(7): in normal mode now
[  186.569533] bcm45308(7): rf input 0 used
[  186.571807] HDMI: CEC device open ... state is 3, flushed 0 old messages from RX fifo
[  186.571884] HDMI: CEC set devtype to 0
[  186.571892] HDMI: CEC start ... state is now 1
[  186.571915] HDMI: CEC returned state 1
[  186.571919] HDMI: CEC state now 801
[  186.610810] bcm45308(7): disabled diseqc and wfe 0
[  186.622446] bcm45308(7): sleeping now
[  186.634836] HDMI: CEC use logical address 3
[  186.634874] HDMI: CEC init completed... state is now 3!
[  186.724172] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
[  186.771860] HDMI: CEC send ok!
[  187.230841] tsmux set cisource reg 06 to val 02
[  187.231527] tsmux set cisource reg 07 to val 05
[  187.808454] change audioenc bitrate to 256000 bits/s
[  187.809347] vice0: change videoenc bitrate to 6000000 bits/s
[  187.809361] change audioenc bitrate to 128000 bits/s
[  187.809773] vice0: change gop length to 0ms
[  187.809788] vice0: allow new gop on new scene off
[  187.809796] vice0: change open gop to off
[  187.809803] vice0: change p-frames to 4
[  187.809809] vice0: change b-frames to 2
[  187.809815] vice0: change to 0 slices per pic
[  187.809878] vice0: change h264 profile to main
[  187.809891] vice0: change h264 level to 3.1
[  189.081523] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
[  275.600406] sync0 is off so we enable it
[  275.600418] sync0: allocated pcroffset 0
[  275.600429] sync0: playback!
[  275.600455] VIDEO0: total delay: 0 (0 ms)
[  275.605317] VIDEO0: start decode
[  275.605349] VIDEO0: flush video decoder
[  275.620092] VIDEO0: first pts 0x0
[  275.761827] VIDEO0: stop decode
[  275.761843] sync0 1fff no decoder left in sync handling so disable
[  275.761847] sync0: was last pcroffset0 user so free it
[  276.108790] bcm45308(0): enabled diseqc and wfe 0
[  276.120638] bcm45308(0): in normal mode now
[  276.120646] bcm45308(0): rf input 0 used
[  276.133905] bcm45308(1): in normal mode now
[  276.133913] bcm45308(1): rf input 0 used
[  276.160241] bcm45308(0): sleeping now
[  276.171323] bcm45308(2): in normal mode now
[  276.171330] bcm45308(2): rf input 0 used
[  276.194849] bcm45308(1): sleeping now
[  276.225218] bcm45308(2): disabled diseqc and wfe 0
[  276.236402] bcm45308(2): sleeping now
[  276.260664] bcm45308(3): enabled diseqc and wfe 0
[  276.271818] bcm45308(3): in normal mode now
[  276.271824] bcm45308(3): rf input 0 used
[  276.283843] bcm45308(4): in normal mode now
[  276.283849] bcm45308(4): rf input 0 used
[  276.309564] bcm45308(3): sleeping now
[  276.321171] bcm45308(5): in normal mode now
[  276.321177] bcm45308(5): rf input 0 used
[  276.346114] bcm45308(4): sleeping now
[  276.357200] bcm45308(6): in normal mode now
[  276.357205] bcm45308(6): rf input 0 used
[  276.383541] bcm45308(5): sleeping now
[  276.394616] bcm45308(7): in normal mode now
[  276.394622] bcm45308(7): rf input 0 used
[  276.419683] bcm45308(0): enabled diseqc and wfe 0
[  276.420823] bcm45308(6): sleeping now
[  276.431065] bcm45308(0): in normal mode now
[  276.431085] bcm45308(0): rf input 0 used
[  276.445700] bcm45308(1): in normal mode now
[  276.445707] bcm45308(1): rf input 0 used
[  276.453059] bcm45308(7): disabled diseqc and wfe 0
[  276.465033] bcm45308(7): sleeping now
[  276.469340] bcm45308(0): sleeping now
[  276.480474] bcm45308(2): in normal mode now
[  276.480481] bcm45308(2): rf input 0 used
[  276.505745] bcm45308(1): sleeping now
[  276.537578] bcm45308(2): disabled diseqc and wfe 0
[  276.549232] bcm45308(2): sleeping now
[  276.573661] bcm45308(3): enabled diseqc and wfe 0
[  276.584801] bcm45308(3): in normal mode now
[  276.584806] bcm45308(3): rf input 0 used
[  276.617627] bcm45308(3): disabled diseqc and wfe 0
[  276.629567] bcm45308(3): sleeping now
[  276.653664] bcm45308(4): enabled diseqc and wfe 0
[  276.664811] bcm45308(4): in normal mode now
[  276.664816] bcm45308(4): rf input 0 used
[  276.695910] bcm45308(4): disabled diseqc and wfe 0
[  276.707438] bcm45308(4): sleeping now
[  276.731663] bcm45308(5): enabled diseqc and wfe 0
[  276.743038] bcm45308(5): in normal mode now
[  276.743045] bcm45308(5): rf input 0 used
[  276.776060] bcm45308(5): disabled diseqc and wfe 0
[  276.787780] bcm45308(5): sleeping now
[  276.811663] bcm45308(6): enabled diseqc and wfe 0
[  276.822981] bcm45308(6): in normal mode now
[  276.822987] bcm45308(6): rf input 0 used
[  276.855696] bcm45308(6): disabled diseqc and wfe 0
[  276.867377] bcm45308(6): sleeping now
[  276.891656] bcm45308(7): enabled diseqc and wfe 0
[  276.903480] bcm45308(7): in normal mode now
[  276.903486] bcm45308(7): rf input 0 used
[  276.905020] HDMI: CEC device open ... state is 3, flushed 0 old messages from RX fifo
[  276.905118] HDMI: CEC set devtype to 0
[  276.905130] HDMI: CEC start ... state is now 1
[  276.905153] HDMI: CEC returned state 1
[  276.905157] HDMI: CEC state now 801
[  276.946571] bcm45308(7): disabled diseqc and wfe 0
[  276.958123] bcm45308(7): sleeping now
[  276.968056] HDMI: CEC use logical address 3
[  276.968099] HDMI: CEC init completed... state is now 3!
[  277.051842] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
[  277.104887] HDMI: CEC send ok!
[  277.554547] tsmux set cisource reg 06 to val 02
[  277.555208] tsmux set cisource reg 07 to val 05
[  278.074354] change audioenc bitrate to 256000 bits/s
[  278.075032] vice0: change videoenc bitrate to 6000000 bits/s
[  278.075042] change audioenc bitrate to 128000 bits/s
[  278.089747] vice0: change gop length to 0ms
[  278.089759] vice0: allow new gop on new scene off
[  278.089766] vice0: change open gop to off
[  278.089773] vice0: change p-frames to 4
[  278.089779] vice0: change b-frames to 2
[  278.089784] vice0: change to 0 slices per pic
[  278.089850] vice0: change h264 profile to main
[  278.089859] vice0: change h264 level to 3.1
[  279.450941] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
[  365.848241] sync0 is off so we enable it
[  365.848254] sync0: allocated pcroffset 0
[  365.848265] sync0: playback!
[  365.848291] VIDEO0: total delay: 0 (0 ms)
[  365.853178] VIDEO0: start decode
[  365.853209] VIDEO0: flush video decoder
[  365.880099] VIDEO0: first pts 0x0
[  366.009671] VIDEO0: stop decode
[  366.009707] sync0 1fff no decoder left in sync handling so disable
[  366.009711] sync0: was last pcroffset0 user so free it
[  366.344643] bcm45308(0): enabled diseqc and wfe 0
[  366.355719] bcm45308(0): in normal mode now
[  366.355725] bcm45308(0): rf input 0 used
[  366.367999] bcm45308(1): in normal mode now
[  366.368006] bcm45308(1): rf input 0 used
[  366.393312] bcm45308(0): sleeping now
[  366.404442] bcm45308(2): in normal mode now
[  366.404449] bcm45308(2): rf input 0 used
[  366.429540] bcm45308(1): sleeping now
[  366.440605] bcm45308(3): in normal mode now
[  366.440611] bcm45308(3): rf input 0 used
[  366.465066] bcm45308(2): sleeping now
[  366.476262] bcm45308(4): in normal mode now
[  366.476268] bcm45308(4): rf input 0 used
[  366.502390] bcm45308(3): sleeping now
[  366.513525] bcm45308(5): in normal mode now
[  366.513532] bcm45308(5): rf input 0 used
[  366.539491] bcm45308(4): sleeping now
[  366.550802] bcm45308(6): in normal mode now
[  366.550808] bcm45308(6): rf input 0 used
[  366.573675] bcm45308(5): sleeping now
[  366.605407] bcm45308(6): disabled diseqc and wfe 0
[  366.617013] bcm45308(6): sleeping now
[  366.640666] bcm45308(7): enabled diseqc and wfe 0
[  366.651815] bcm45308(7): in normal mode now
[  366.651820] bcm45308(7): rf input 0 used
[  366.679944] bcm45308(0): enabled diseqc and wfe 0
[  366.684502] bcm45308(7): disabled diseqc and wfe 0
[  366.691740] bcm45308(0): in normal mode now
[  366.691746] bcm45308(0): rf input 0 used
[  366.696758] bcm45308(7): sleeping now
[  366.704241] bcm45308(1): in normal mode now
[  366.704248] bcm45308(1): rf input 0 used
[  366.730406] bcm45308(0): sleeping now
[  366.762287] bcm45308(1): disabled diseqc and wfe 0
[  366.773929] bcm45308(1): sleeping now
[  366.798832] bcm45308(2): enabled diseqc and wfe 0
[  366.810474] bcm45308(2): in normal mode now
[  366.810480] bcm45308(2): rf input 0 used
[  366.843223] bcm45308(2): disabled diseqc and wfe 0
[  366.854936] bcm45308(2): sleeping now
[  366.878841] bcm45308(3): enabled diseqc and wfe 0
[  366.890487] bcm45308(3): in normal mode now
[  366.890492] bcm45308(3): rf input 0 used
[  366.923246] bcm45308(3): disabled diseqc and wfe 0
[  366.934928] bcm45308(3): sleeping now
[  366.959827] bcm45308(4): enabled diseqc and wfe 0
[  366.971518] bcm45308(4): in normal mode now
[  366.971523] bcm45308(4): rf input 0 used
[  367.004142] bcm45308(4): disabled diseqc and wfe 0
[  367.015910] bcm45308(4): sleeping now
[  367.040827] bcm45308(5): enabled diseqc and wfe 0
[  367.052481] bcm45308(5): in normal mode now
[  367.052486] bcm45308(5): rf input 0 used
[  367.085810] bcm45308(5): disabled diseqc and wfe 0
[  367.097516] bcm45308(5): sleeping now
[  367.122863] bcm45308(6): enabled diseqc and wfe 0
[  367.134519] bcm45308(6): in normal mode now
[  367.134524] bcm45308(6): rf input 0 used
[  367.167346] bcm45308(6): disabled diseqc and wfe 0
[  367.179091] bcm45308(6): sleeping now
[  367.203835] bcm45308(7): enabled diseqc and wfe 0
[  367.215514] bcm45308(7): in normal mode now
[  367.215519] bcm45308(7): rf input 0 used
[  367.219654] HDMI: CEC device open ... state is 3, flushed 0 old messages from RX fifo
[  367.219737] HDMI: CEC set devtype to 0
[  367.219748] HDMI: CEC start ... state is now 1
[  367.219774] HDMI: CEC returned state 1
[  367.219777] HDMI: CEC state now 801
[  367.257244] bcm45308(7): disabled diseqc and wfe 0
[  367.268926] bcm45308(7): sleeping now
[  367.282658] HDMI: CEC use logical address 3
[  367.282678] HDMI: CEC init completed... state is now 3!
[  367.369193] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
[  367.419489] HDMI: CEC send ok!
[  367.862280] tsmux set cisource reg 06 to val 02
[  367.862832] tsmux set cisource reg 07 to val 05
[  368.424680] change audioenc bitrate to 256000 bits/s
[  368.425730] vice0: change videoenc bitrate to 6000000 bits/s
[  368.425746] change audioenc bitrate to 128000 bits/s
[  368.429751] vice0: change gop length to 0ms
[  368.429762] vice0: allow new gop on new scene off
[  368.429769] vice0: change open gop to off
[  368.429774] vice0: change p-frames to 4
[  368.429780] vice0: change b-frames to 2
[  368.429785] vice0: change to 0 slices per pic
[  368.429838] vice0: change h264 profile to main
[  368.429847] vice0: change h264 level to 3.1
[  369.700699] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
[  456.117279] sync0 is off so we enable it
[  456.117290] sync0: allocated pcroffset 0
[  456.117300] sync0: playback!
[  456.117322] VIDEO0: total delay: 0 (0 ms)
[  456.122311] VIDEO0: start decode
[  456.122349] VIDEO0: flush video decoder
[  456.140058] VIDEO0: first pts 0x0
[  456.278807] VIDEO0: stop decode
[  456.278821] sync0 1fff no decoder left in sync handling so disable
[  456.278825] sync0: was last pcroffset0 user so free it
[  456.616798] bcm45308(0): enabled diseqc and wfe 0
[  456.628437] bcm45308(0): in normal mode now
[  456.628443] bcm45308(0): rf input 0 used
[  456.641764] bcm45308(1): in normal mode now
[  456.641773] bcm45308(1): rf input 0 used
[  456.666744] bcm45308(0): sleeping now
[  456.697078] bcm45308(1): disabled diseqc and wfe 0
[  456.708125] bcm45308(1): sleeping now
[  456.732817] bcm45308(2): enabled diseqc and wfe 0
[  456.744481] bcm45308(2): in normal mode now
[  456.744487] bcm45308(2): rf input 0 used
[  456.756928] bcm45308(3): in normal mode now
[  456.756935] bcm45308(3): rf input 0 used
[  456.781635] bcm45308(2): sleeping now
[  456.793178] bcm45308(4): in normal mode now
[  456.793183] bcm45308(4): rf input 0 used
[  456.815538] bcm45308(3): sleeping now
[  456.826628] bcm45308(5): in normal mode now
[  456.826634] bcm45308(5): rf input 0 used
[  456.849951] bcm45308(4): sleeping now
[  456.880106] bcm45308(5): disabled diseqc and wfe 0
[  456.891184] bcm45308(5): sleeping now
[  456.915668] bcm45308(6): enabled diseqc and wfe 0
[  456.926758] bcm45308(6): in normal mode now
[  456.926764] bcm45308(6): rf input 0 used
[  456.958978] bcm45308(6): disabled diseqc and wfe 0
[  456.970159] bcm45308(6): sleeping now
[  456.994655] bcm45308(7): enabled diseqc and wfe 0
[  457.005796] bcm45308(7): in normal mode now
[  457.005802] bcm45308(7): rf input 0 used
[  457.031881] bcm45308(0): enabled diseqc and wfe 0
[  457.037781] bcm45308(7): disabled diseqc and wfe 0
[  457.043651] bcm45308(0): in normal mode now
[  457.043656] bcm45308(0): rf input 0 used
[  457.050047] bcm45308(7): sleeping now
[  457.075695] bcm45308(0): disabled diseqc and wfe 0
[  457.087574] bcm45308(0): sleeping now
[  457.111687] bcm45308(1): enabled diseqc and wfe 0
[  457.122871] bcm45308(1): in normal mode now
[  457.122876] bcm45308(1): rf input 0 used
[  457.156177] bcm45308(1): disabled diseqc and wfe 0
[  457.167926] bcm45308(1): sleeping now
[  457.192662] bcm45308(2): enabled diseqc and wfe 0
[  457.203886] bcm45308(2): in normal mode now
[  457.203890] bcm45308(2): rf input 0 used
[  457.216390] bcm45308(3): in normal mode now
[  457.216397] bcm45308(3): rf input 0 used
[  457.241463] bcm45308(2): sleeping now
[  457.253086] bcm45308(4): in normal mode now
[  457.253093] bcm45308(4): rf input 0 used
[  457.275512] bcm45308(3): sleeping now
[  457.286797] bcm45308(5): in normal mode now
[  457.286804] bcm45308(5): rf input 0 used
[  457.311155] bcm45308(4): sleeping now
[  457.342957] bcm45308(5): disabled diseqc and wfe 0
[  457.354640] bcm45308(5): sleeping now
[  457.379687] bcm45308(6): enabled diseqc and wfe 0
[  457.390899] bcm45308(6): in normal mode now
[  457.390904] bcm45308(6): rf input 0 used
[  457.403411] bcm45308(7): in normal mode now
[  457.403418] bcm45308(7): rf input 0 used
[  457.405123] HDMI: CEC device open ... state is 3, flushed 0 old messages from RX fifo
[  457.405207] HDMI: CEC set devtype to 0
[  457.405216] HDMI: CEC start ... state is now 1
[  457.405240] HDMI: CEC returned state 1
[  457.405244] HDMI: CEC state now 801
[  457.430362] bcm45308(6): sleeping now
[  457.462713] bcm45308(7): disabled diseqc and wfe 0
[  457.468158] HDMI: CEC use logical address 3
[  457.468176] HDMI: CEC init completed... state is now 3!
[  457.474166] bcm45308(7): sleeping now
[  457.555861] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
[  457.605006] HDMI: CEC send ok!
[  458.067324] tsmux set cisource reg 06 to val 02
[  458.067866] tsmux set cisource reg 07 to val 05
[  458.589215] change audioenc bitrate to 256000 bits/s
[  458.589935] vice0: change videoenc bitrate to 6000000 bits/s
[  458.589947] change audioenc bitrate to 128000 bits/s
[  458.609744] vice0: change gop length to 0ms
[  458.609757] vice0: allow new gop on new scene off
[  458.609764] vice0: change open gop to off
[  458.609770] vice0: change p-frames to 4
[  458.609777] vice0: change b-frames to 2
[  458.609782] vice0: change to 0 slices per pic
[  458.609861] vice0: change h264 profile to main
[  458.609871] vice0: change h264 level to 3.1
[  459.957207] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
[  546.356146] sync0 is off so we enable it
[  546.356161] sync0: allocated pcroffset 0
[  546.356174] sync0: playback!
[  546.356198] VIDEO0: total delay: 0 (0 ms)
[  546.361174] VIDEO0: start decode
[  546.361205] VIDEO0: flush video decoder
[  546.380067] VIDEO0: first pts 0x0
[  546.517806] VIDEO0: stop decode
[  546.517820] sync0 1fff no decoder left in sync handling so disable
[  546.517824] sync0: was last pcroffset0 user so free it
[  546.852826] bcm45308(0): enabled diseqc and wfe 0
[  546.864672] bcm45308(0): in normal mode now
[  546.864679] bcm45308(0): rf input 0 used
[  546.897399] bcm45308(0): disabled diseqc and wfe 0
[  546.909040] bcm45308(0): sleeping now
[  546.933832] bcm45308(1): enabled diseqc and wfe 0
[  546.945415] bcm45308(1): in normal mode now
[  546.945420] bcm45308(1): rf input 0 used
[  546.978077] bcm45308(1): disabled diseqc and wfe 0
[  546.989647] bcm45308(1): sleeping now
[  547.014803] bcm45308(2): enabled diseqc and wfe 0
[  547.026365] bcm45308(2): in normal mode now
[  547.026372] bcm45308(2): rf input 0 used
[  547.058934] bcm45308(2): disabled diseqc and wfe 0
[  547.070573] bcm45308(2): sleeping now
[  547.095795] bcm45308(3): enabled diseqc and wfe 0
[  547.107421] bcm45308(3): in normal mode now
[  547.107427] bcm45308(3): rf input 0 used
[  547.140049] bcm45308(3): disabled diseqc and wfe 0
[  547.151694] bcm45308(3): sleeping now
[  547.176796] bcm45308(4): enabled diseqc and wfe 0
[  547.188411] bcm45308(4): in normal mode now
[  547.188416] bcm45308(4): rf input 0 used
[  547.220903] bcm45308(4): disabled diseqc and wfe 0
[  547.232515] bcm45308(4): sleeping now
[  547.257797] bcm45308(5): enabled diseqc and wfe 0
[  547.269409] bcm45308(5): in normal mode now
[  547.269414] bcm45308(5): rf input 0 used
[  547.301928] bcm45308(5): disabled diseqc and wfe 0
[  547.313525] bcm45308(5): sleeping now
[  547.338793] bcm45308(6): enabled diseqc and wfe 0
[  547.350388] bcm45308(6): in normal mode now
[  547.350394] bcm45308(6): rf input 0 used
[  547.382751] bcm45308(6): disabled diseqc and wfe 0
[  547.394370] bcm45308(6): sleeping now
[  547.418791] bcm45308(7): enabled diseqc and wfe 0
[  547.430350] bcm45308(7): in normal mode now
[  547.430355] bcm45308(7): rf input 0 used
[  547.458675] bcm45308(0): enabled diseqc and wfe 0
[  547.463329] bcm45308(7): disabled diseqc and wfe 0
[  547.469987] bcm45308(0): in normal mode now
[  547.469993] bcm45308(0): rf input 0 used
[  547.475363] bcm45308(7): sleeping now
[  547.502761] bcm45308(0): disabled diseqc and wfe 0
[  547.514433] bcm45308(0): sleeping now
[  547.538662] bcm45308(1): enabled diseqc and wfe 0
[  547.549792] bcm45308(1): in normal mode now
[  547.549798] bcm45308(1): rf input 0 used
[  547.583833] bcm45308(1): disabled diseqc and wfe 0
[  547.595508] bcm45308(1): sleeping now
[  547.619678] bcm45308(2): enabled diseqc and wfe 0
[  547.630896] bcm45308(2): in normal mode now
[  547.630901] bcm45308(2): rf input 0 used
[  547.663616] bcm45308(2): disabled diseqc and wfe 0
[  547.675319] bcm45308(2): sleeping now
[  547.699662] bcm45308(3): enabled diseqc and wfe 0
[  547.710773] bcm45308(3): in normal mode now
[  547.710778] bcm45308(3): rf input 0 used
[  547.744605] bcm45308(3): disabled diseqc and wfe 0
[  547.756323] bcm45308(3): sleeping now
[  547.780662] bcm45308(4): enabled diseqc and wfe 0
[  547.791764] bcm45308(4): in normal mode now
[  547.791769] bcm45308(4): rf input 0 used
[  547.825434] bcm45308(4): disabled diseqc and wfe 0
[  547.837207] bcm45308(4): sleeping now
[  547.861650] bcm45308(5): enabled diseqc and wfe 0
[  547.872732] bcm45308(5): in normal mode now
[  547.872737] bcm45308(5): rf input 0 used
[  547.906757] bcm45308(5): disabled diseqc and wfe 0
[  547.918603] bcm45308(5): sleeping now
[  547.942663] bcm45308(6): enabled diseqc and wfe 0
[  547.953788] bcm45308(6): in normal mode now
[  547.953793] bcm45308(6): rf input 0 used
[  547.965771] bcm45308(7): in normal mode now
[  547.965778] bcm45308(7): rf input 0 used
[  547.967364] HDMI: CEC device open ... state is 3, flushed 0 old messages from RX fifo
[  547.967444] HDMI: CEC set devtype to 0
[  547.967453] HDMI: CEC start ... state is now 1
[  547.967477] HDMI: CEC returned state 1
[  547.967480] HDMI: CEC state now 801
[  547.996017] bcm45308(6): sleeping now
[  548.030401] HDMI: CEC use logical address 3
[  548.030425] HDMI: CEC init completed... state is now 3!
[  548.035690] bcm45308(7): disabled diseqc and wfe 0
[  548.050058] bcm45308(7): sleeping now
[  548.112503] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
[  548.167168] HDMI: CEC send ok!
[  548.615188] tsmux set cisource reg 06 to val 02
[  548.616800] tsmux set cisource reg 07 to val 05
[  549.176444] change audioenc bitrate to 256000 bits/s
[  549.177257] vice0: change videoenc bitrate to 6000000 bits/s
[  549.177274] change audioenc bitrate to 128000 bits/s
[  549.189741] vice0: change gop length to 0ms
[  549.189753] vice0: allow new gop on new scene off
[  549.189759] vice0: change open gop to off
[  549.189765] vice0: change p-frames to 4
[  549.189770] vice0: change b-frames to 2
[  549.189776] vice0: change to 0 slices per pic
[  549.189842] vice0: change h264 profile to main
[  549.189852] vice0: change h264 level to 3.1
[  550.448622] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
[  636.497776] sync0 is off so we enable it
[  636.497788] sync0: allocated pcroffset 0
[  636.497801] sync0: playback!
[  636.497830] VIDEO0: total delay: 0 (0 ms)
[  636.502784] VIDEO0: start decode
[  636.502818] VIDEO0: flush video decoder
[  636.520057] VIDEO0: first pts 0x0
[  636.659328] VIDEO0: stop decode
[  636.659342] sync0 1fff no decoder left in sync handling so disable
[  636.659346] sync0: was last pcroffset0 user so free it
[  637.001846] bcm45308(0): enabled diseqc and wfe 0
[  637.013682] bcm45308(0): in normal mode now
[  637.013689] bcm45308(0): rf input 0 used
[  637.046645] bcm45308(0): disabled diseqc and wfe 0
[  637.058568] bcm45308(0): sleeping now
[  637.083833] bcm45308(1): enabled diseqc and wfe 0
[  637.095400] bcm45308(1): in normal mode now
[  637.095406] bcm45308(1): rf input 0 used
[  637.128003] bcm45308(1): disabled diseqc and wfe 0
[  637.139665] bcm45308(1): sleeping now
[  637.164795] bcm45308(2): enabled diseqc and wfe 0
[  637.176352] bcm45308(2): in normal mode now
[  637.176356] bcm45308(2): rf input 0 used
[  637.208780] bcm45308(2): disabled diseqc and wfe 0
[  637.220363] bcm45308(2): sleeping now
[  637.244662] bcm45308(3): enabled diseqc and wfe 0
[  637.255801] bcm45308(3): in normal mode now
[  637.255805] bcm45308(3): rf input 0 used
[  637.288291] bcm45308(3): disabled diseqc and wfe 0
[  637.299906] bcm45308(3): sleeping now
[  637.324796] bcm45308(4): enabled diseqc and wfe 0
[  637.336360] bcm45308(4): in normal mode now
[  637.336365] bcm45308(4): rf input 0 used
[  637.368899] bcm45308(4): disabled diseqc and wfe 0
[  637.380538] bcm45308(4): sleeping now
[  637.405794] bcm45308(5): enabled diseqc and wfe 0
[  637.417422] bcm45308(5): in normal mode now
[  637.417427] bcm45308(5): rf input 0 used
[  637.450022] bcm45308(5): disabled diseqc and wfe 0
[  637.461947] bcm45308(5): sleeping now
[  637.486830] bcm45308(6): enabled diseqc and wfe 0
[  637.498392] bcm45308(6): in normal mode now
[  637.498398] bcm45308(6): rf input 0 used
[  637.531007] bcm45308(6): disabled diseqc and wfe 0
[  637.542625] bcm45308(6): sleeping now
[  637.567822] bcm45308(7): enabled diseqc and wfe 0
[  637.579369] bcm45308(7): in normal mode now
[  637.579374] bcm45308(7): rf input 0 used
[  637.607835] bcm45308(0): enabled diseqc and wfe 0
[  637.612219] bcm45308(7): disabled diseqc and wfe 0
[  637.619627] bcm45308(0): in normal mode now
[  637.619634] bcm45308(0): rf input 0 used
[  637.624274] bcm45308(7): sleeping now
[  637.652383] bcm45308(0): disabled diseqc and wfe 0
[  637.664057] bcm45308(0): sleeping now
[  637.688824] bcm45308(1): enabled diseqc and wfe 0
[  637.700555] bcm45308(1): in normal mode now
[  637.700560] bcm45308(1): rf input 0 used
[  637.733151] bcm45308(1): disabled diseqc and wfe 0
[  637.744828] bcm45308(1): sleeping now
[  637.769828] bcm45308(2): enabled diseqc and wfe 0
[  637.781532] bcm45308(2): in normal mode now
[  637.781537] bcm45308(2): rf input 0 used
[  637.814146] bcm45308(2): disabled diseqc and wfe 0
[  637.825831] bcm45308(2): sleeping now
[  637.850839] bcm45308(3): enabled diseqc and wfe 0
[  637.862482] bcm45308(3): in normal mode now
[  637.862487] bcm45308(3): rf input 0 used
[  637.895123] bcm45308(3): disabled diseqc and wfe 0
[  637.906908] bcm45308(3): sleeping now
[  637.931830] bcm45308(4): enabled diseqc and wfe 0
[  637.943537] bcm45308(4): in normal mode now
[  637.943543] bcm45308(4): rf input 0 used
[  637.976139] bcm45308(4): disabled diseqc and wfe 0
[  637.987890] bcm45308(4): sleeping now
[  638.012839] bcm45308(5): enabled diseqc and wfe 0
[  638.024577] bcm45308(5): in normal mode now
[  638.024582] bcm45308(5): rf input 0 used
[  638.057370] bcm45308(5): disabled diseqc and wfe 0
[  638.069032] bcm45308(5): sleeping now
[  638.093828] bcm45308(6): enabled diseqc and wfe 0
[  638.105562] bcm45308(6): in normal mode now
[  638.105567] bcm45308(6): rf input 0 used
[  638.138145] bcm45308(6): disabled diseqc and wfe 0
[  638.149830] bcm45308(6): sleeping now
[  638.174828] bcm45308(7): enabled diseqc and wfe 0
[  638.186539] bcm45308(7): in normal mode now
[  638.186545] bcm45308(7): rf input 0 used
[  638.191029] HDMI: CEC device open ... state is 3, flushed 0 old messages from RX fifo
[  638.191148] HDMI: CEC set devtype to 0
[  638.191161] HDMI: CEC start ... state is now 1
[  638.191188] HDMI: CEC returned state 1
[  638.191192] HDMI: CEC state now 801
[  638.225697] bcm45308(7): disabled diseqc and wfe 0
[  638.237248] bcm45308(7): sleeping now
[  638.254141] HDMI: CEC use logical address 3
[  638.254178] HDMI: CEC init completed... state is now 3!
[  638.341541] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
[  638.391012] HDMI: CEC send ok!
[  638.848188] tsmux set cisource reg 06 to val 02
[  638.848736] tsmux set cisource reg 07 to val 05
[  639.386067] change audioenc bitrate to 256000 bits/s
[  639.387175] vice0: change videoenc bitrate to 6000000 bits/s
[  639.387189] change audioenc bitrate to 128000 bits/s
[  639.389749] vice0: change gop length to 0ms
[  639.389761] vice0: allow new gop on new scene off
[  639.389768] vice0: change open gop to off
[  639.389774] vice0: change p-frames to 4
[  639.389780] vice0: change b-frames to 2
[  639.389785] vice0: change to 0 slices per pic
[  639.389846] vice0: change h264 profile to main
[  639.389855] vice0: change h264 level to 3.1
[  640.736832] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
[  726.606615] sync0 is off so we enable it
[  726.606628] sync0: allocated pcroffset 0
[  726.606638] sync0: playback!
[  726.606662] VIDEO0: total delay: 0 (0 ms)
[  726.611529] VIDEO0: start decode
[  726.611562] VIDEO0: flush video decoder
[  726.640058] VIDEO0: first pts 0x0
[  726.768042] VIDEO0: stop decode
[  726.768057] sync0 1fff no decoder left in sync handling so disable
[  726.768061] sync0: was last pcroffset0 user so free it
[  727.103802] bcm45308(0): enabled diseqc and wfe 0
[  727.115678] bcm45308(0): in normal mode now
[  727.115685] bcm45308(0): rf input 0 used
[  727.148584] bcm45308(0): disabled diseqc and wfe 0
[  727.160617] bcm45308(0): sleeping now
[  727.185797] bcm45308(1): enabled diseqc and wfe 0
[  727.197470] bcm45308(1): in normal mode now
[  727.197475] bcm45308(1): rf input 0 used
[  727.230100] bcm45308(1): disabled diseqc and wfe 0
[  727.241720] bcm45308(1): sleeping now
[  727.266798] bcm45308(2): enabled diseqc and wfe 0
[  727.278344] bcm45308(2): in normal mode now
[  727.278349] bcm45308(2): rf input 0 used
[  727.311037] bcm45308(2): disabled diseqc and wfe 0
[  727.322627] bcm45308(2): sleeping now
[  727.347795] bcm45308(3): enabled diseqc and wfe 0
[  727.359374] bcm45308(3): in normal mode now
[  727.359379] bcm45308(3): rf input 0 used
[  727.391980] bcm45308(3): disabled diseqc and wfe 0
[  727.403604] bcm45308(3): sleeping now
[  727.428798] bcm45308(4): enabled diseqc and wfe 0
[  727.440429] bcm45308(4): in normal mode now
[  727.440435] bcm45308(4): rf input 0 used
[  727.473090] bcm45308(4): disabled diseqc and wfe 0
[  727.484668] bcm45308(4): sleeping now
[  727.509800] bcm45308(5): enabled diseqc and wfe 0
[  727.521398] bcm45308(5): in normal mode now
[  727.521403] bcm45308(5): rf input 0 used
[  727.554009] bcm45308(5): disabled diseqc and wfe 0
[  727.565609] bcm45308(5): sleeping now
[  727.590800] bcm45308(6): enabled diseqc and wfe 0
[  727.602395] bcm45308(6): in normal mode now
[  727.602399] bcm45308(6): rf input 0 used
[  727.634826] bcm45308(6): disabled diseqc and wfe 0
[  727.646395] bcm45308(6): sleeping now
[  727.671796] bcm45308(7): enabled diseqc and wfe 0
[  727.683363] bcm45308(7): in normal mode now
[  727.683368] bcm45308(7): rf input 0 used
[  727.711866] bcm45308(0): enabled diseqc and wfe 0
[  727.716267] bcm45308(7): disabled diseqc and wfe 0
[  727.723688] bcm45308(0): in normal mode now
[  727.723694] bcm45308(0): rf input 0 used
[  727.728487] bcm45308(7): sleeping now
[  727.756519] bcm45308(0): disabled diseqc and wfe 0
[  727.768274] bcm45308(0): sleeping now
[  727.792834] bcm45308(1): enabled diseqc and wfe 0
[  727.804504] bcm45308(1): in normal mode now
[  727.804509] bcm45308(1): rf input 0 used
[  727.837264] bcm45308(1): disabled diseqc and wfe 0
[  727.848951] bcm45308(1): sleeping now
[  727.873829] bcm45308(2): enabled diseqc and wfe 0
[  727.885487] bcm45308(2): in normal mode now
[  727.885492] bcm45308(2): rf input 0 used
[  727.918182] bcm45308(2): disabled diseqc and wfe 0
[  727.929840] bcm45308(2): sleeping now
[  727.954828] bcm45308(3): enabled diseqc and wfe 0
[  727.966480] bcm45308(3): in normal mode now
[  727.966485] bcm45308(3): rf input 0 used
[  727.999193] bcm45308(3): disabled diseqc and wfe 0
[  728.010961] bcm45308(3): sleeping now
[  728.035823] bcm45308(4): enabled diseqc and wfe 0
[  728.047472] bcm45308(4): in normal mode now
[  728.047479] bcm45308(4): rf input 0 used
[  728.080234] bcm45308(4): disabled diseqc and wfe 0
[  728.091949] bcm45308(4): sleeping now
[  728.116827] bcm45308(5): enabled diseqc and wfe 0
[  728.128479] bcm45308(5): in normal mode now
[  728.128485] bcm45308(5): rf input 0 used
[  728.161181] bcm45308(5): disabled diseqc and wfe 0
[  728.172862] bcm45308(5): sleeping now
[  728.197824] bcm45308(6): enabled diseqc and wfe 0
[  728.209507] bcm45308(6): in normal mode now
[  728.209512] bcm45308(6): rf input 0 used
[  728.242287] bcm45308(6): disabled diseqc and wfe 0
[  728.253989] bcm45308(6): sleeping now
[  728.278824] bcm45308(7): enabled diseqc and wfe 0
[  728.290487] bcm45308(7): in normal mode now
[  728.290492] bcm45308(7): rf input 0 used
[  728.294615] HDMI: CEC device open ... state is 3, flushed 0 old messages from RX fifo
[  728.294699] HDMI: CEC set devtype to 0
[  728.294708] HDMI: CEC start ... state is now 1
[  728.294732] HDMI: CEC returned state 1
[  728.294736] HDMI: CEC state now 801
[  728.333575] bcm45308(7): disabled diseqc and wfe 0
[  728.344984] bcm45308(7): sleeping now
[  728.357685] HDMI: CEC use logical address 3
[  728.357718] HDMI: CEC init completed... state is now 3!
[  728.445389] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
[  728.494484] HDMI: CEC send ok!
[  728.941738] tsmux set cisource reg 06 to val 02
[  728.943415] tsmux set cisource reg 07 to val 05
[  729.516776] change audioenc bitrate to 256000 bits/s
[  729.517792] vice0: change videoenc bitrate to 6000000 bits/s
[  729.517806] change audioenc bitrate to 128000 bits/s
[  729.529744] vice0: change gop length to 0ms
[  729.529756] vice0: allow new gop on new scene off
[  729.529763] vice0: change open gop to off
[  729.529769] vice0: change p-frames to 4
[  729.529774] vice0: change b-frames to 2
[  729.529780] vice0: change to 0 slices per pic
[  729.529846] vice0: change h264 profile to main
[  729.529856] vice0: change h264 level to 3.1
[  730.798517] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)