dm800se don't boot with connected HDMI cable

    • dm800se don't boot with connected HDMI cable

      Hi Group! Sorry for my english! I connect my dreambox 800SE with newnigma image to my Pioneer TV and dreambox don't booting with connected HDMI cable.

      Progress bar stopped and blink blue led. I attach full boot log from COM port

      Last lines in log

      Quellcode

      1. [4294687.330000] Code: ae03000c afa20014 afb60010 <ac430000> afb30018 2402ffff c2030000 00402021 e2040000
      2. [4294687.333000] set sb to 3(2)
      3. [4294687.334000] set fb to 2(-1)
      4. [4294687.334000] set input to 0
      5. [4294687.334000] set fb to 2(-1)
      6. [4294687.338000] bcm_video_analog_port_setup (fmt=7)
      7. [4294687.339000] SET FORMAT: display[1], format=7
      8. [4294687.340000] display 0 uses vbi path 1
      9. [4294687.341000] display 1 uses vbi path 0
      10. [4294687.342000] HDMI: hotplug handler!
      11. [4294687.342000] HDMI: no device attached
      12. [4294687.343000] using 50.00Hz as MonitorRefreshRate
      13. [4294687.343000] SET FORMAT: display[0], format=37
      14. [4294687.344000] set fb to 2(0)
      15. [4294687.344000] bcm_video_analog_port_setup (fmt=7)
      16. [4294687.345000] SET FORMAT: display[1], format=7
      17. [4294687.386000] disable wss on display 0
      18. [4294687.387000] disable wss on display 1
      19. [4294687.387000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
      Alles anzeigen


      thank you!
      Dateien

      • 1.txt

        (20,48 kB, 544 mal heruntergeladen, zuletzt: )

    • Original von seal
      PS if i boot dreambox without connected HDMI cable - dreambox booting ok. After that i connect HDMI to TV and see the picture. Dreambox working perfect.


      have u tested this with another hdmi cable or with scart ?

      your problem is very stange :(