NewEnigma very slow on all channel list in DM8000

Tom0000 · 27. Februar 2011, 12:50

Hi.
I am using the NewEnigma on my dm8000 from 10 months. The problem I see in all NewEnigmas released in this time. Because I do not see any improvements , I decided to ask about it here.

My dm8000 is rev 1.2 (12.2009), I am using it with network disk over cifs, the softcams I have used by this time were newcs, mgcamd, cccamd, gb, oscam.
The setting I am using is from cajton for all sats. I have toroidal dish with 18 lnb-s for this number of sats , managed all using some diseq-s switches.

The problem is if I am selecting list of all channels (red button).
Change channel : press button, wait, see spinner, wait, see openned channel (~15s), change to next channel , press button, wait, see spinner, wait, see openned channel, press buton "down" wait, see spinner, wait , see window with channels.
Change position on channel on this window is standard quick (very strange) , select channel here and press ok, wait, see spinner , wait, see channel. Each step need 10-20 seconds.

What is a problem with it ? Dm8000 has very quick CPU. Why ~4 thousands of channels makes it no usable ? Each other firmaware (not new enigma) is here much more quick. No more than 5 seconds for the slowest one.

Is a chance for change it in New Enigma for better (faster) working ? All list I am not using very often, but sometimes I have to build or edit favorites lists and working with all list is need.

MartiniB · 28. Februar 2011, 08:31

1. does your services list is virgine, not damaged by autoupdate function?
sometime Enigma2 adds services from wrong orbital position, for that reason i keep empty firsts inputs of diseq switches

2. diseq equpment?

3. diseq settings?
show lines config.Nims.*.*** from the /etc/enigma2/settings

Raitsa · 28. Februar 2011, 10:23

I would definitely start by flashing the newest Newnigma2 image in your 8000.

Tom0000 · 28. Februar 2011, 16:22

EMP-Centauri VIPER 8/1 version 2 (diseq 1.2) and axings 4/1 (diseq 1.1).

I am using ready cayton setting each time . I am adding 3 my own favorite lists from my old cayton to new cayton setting.

I prefere installing new enigma by flashing the box, not by the software update.

I have to add, none of shorter lists generate this problem. Only the list with all channels.

My configuration is here (sorry is long) :

config.Nims.1.configMode=advanced
config.Nims.1.advanced.sats=282
config.Nims.1.advanced.sat.3592.lnb=3
config.Nims.1.advanced.sat.450.lnb=21
config.Nims.1.advanced.sat.330.lnb=14
config.Nims.1.advanced.sat.192.lnb=9
config.Nims.1.advanced.sat.3530.lnb=1
config.Nims.1.advanced.sat.130.lnb=7
config.Nims.1.advanced.sat.235.lnb=10
config.Nims.1.advanced.sat.3550.lnb=2
config.Nims.1.advanced.sat.420.lnb=17
config.Nims.1.advanced.sat.282.lnb=12
config.Nims.1.advanced.sat.360.lnb=15
config.Nims.1.advanced.sat.260.lnb=11
config.Nims.1.advanced.sat.3520.lnb=1
config.Nims.1.advanced.sat.70.lnb=5
config.Nims.1.advanced.sat.90.lnb=6
config.Nims.1.advanced.sat.100.lnb=6
config.Nims.1.advanced.sat.3560.lnb=2
config.Nims.1.advanced.sat.48.lnb=4
config.Nims.1.advanced.sat.390.lnb=16
config.Nims.1.advanced.sat.530.lnb=22
config.Nims.1.advanced.lnb.11.commitedDiseqcCommand=BA
config.Nims.1.advanced.lnb.11.diseqcMode=1_1
config.Nims.1.advanced.lnb.11.uncommittedDiseqcCommand=3
config.Nims.1.advanced.lnb.11.increased_voltage=true
config.Nims.1.advanced.lnb.11.commandOrder=uct
config.Nims.1.advanced.lnb.10.diseqcMode=1_1
config.Nims.1.advanced.lnb.10.uncommittedDiseqcCommand=3
config.Nims.1.advanced.lnb.10.increased_voltage=true
config.Nims.1.advanced.lnb.10.commandOrder=uct
config.Nims.1.advanced.lnb.10.commitedDiseqcCommand=AB
config.Nims.1.advanced.lnb.12.increased_voltage=true
config.Nims.1.advanced.lnb.12.uncommittedDiseqcCommand=3
config.Nims.1.advanced.lnb.12.diseqcMode=1_1
config.Nims.1.advanced.lnb.12.commandOrder=uct
config.Nims.1.advanced.lnb.12.commitedDiseqcCommand=BB
config.Nims.1.advanced.lnb.15.increased_voltage=true
config.Nims.1.advanced.lnb.15.uncommittedDiseqcCommand=4
config.Nims.1.advanced.lnb.15.diseqcMode=1_1
config.Nims.1.advanced.lnb.15.commandOrder=uct
config.Nims.1.advanced.lnb.15.commitedDiseqcCommand=BA
config.Nims.1.advanced.lnb.14.increased_voltage=true
config.Nims.1.advanced.lnb.14.uncommittedDiseqcCommand=4
config.Nims.1.advanced.lnb.14.diseqcMode=1_1
config.Nims.1.advanced.lnb.14.commandOrder=uct
config.Nims.1.advanced.lnb.14.commitedDiseqcCommand=AB
config.Nims.1.advanced.lnb.17.diseqcMode=1_1
config.Nims.1.advanced.lnb.17.uncommittedDiseqcCommand=5
config.Nims.1.advanced.lnb.17.increased_voltage=true
config.Nims.1.advanced.lnb.17.commandOrder=uct
config.Nims.1.advanced.lnb.17.commitedDiseqcCommand=AA
config.Nims.1.advanced.lnb.16.increased_voltage=true
config.Nims.1.advanced.lnb.16.uncommittedDiseqcCommand=4
config.Nims.1.advanced.lnb.16.diseqcMode=1_1
config.Nims.1.advanced.lnb.16.commandOrder=uct
config.Nims.1.advanced.lnb.16.commitedDiseqcCommand=BB
config.Nims.1.advanced.lnb.22.diseqcMode=1_1
config.Nims.1.advanced.lnb.22.uncommittedDiseqcCommand=7
config.Nims.1.advanced.lnb.22.increased_voltage=true
config.Nims.1.advanced.lnb.22.commandOrder=uct
config.Nims.1.advanced.lnb.22.commitedDiseqcCommand=AA
config.Nims.1.advanced.lnb.1.increased_voltage=true
config.Nims.1.advanced.lnb.1.uncommittedDiseqcCommand=1
config.Nims.1.advanced.lnb.1.diseqcMode=1_1
config.Nims.1.advanced.lnb.1.commandOrder=uct
config.Nims.1.advanced.lnb.1.commitedDiseqcCommand=AA
config.Nims.1.advanced.lnb.3.increased_voltage=true
config.Nims.1.advanced.lnb.3.uncommittedDiseqcCommand=1
config.Nims.1.advanced.lnb.3.diseqcMode=1_1
config.Nims.1.advanced.lnb.3.commandOrder=uct
config.Nims.1.advanced.lnb.3.commitedDiseqcCommand=BA
config.Nims.1.advanced.lnb.2.increased_voltage=true
config.Nims.1.advanced.lnb.2.uncommittedDiseqcCommand=1
config.Nims.1.advanced.lnb.2.diseqcMode=1_1
config.Nims.1.advanced.lnb.2.commandOrder=uct
config.Nims.1.advanced.lnb.2.commitedDiseqcCommand=AB
config.Nims.1.advanced.lnb.5.increased_voltage=true
config.Nims.1.advanced.lnb.5.uncommittedDiseqcCommand=2
config.Nims.1.advanced.lnb.5.diseqcMode=1_1
config.Nims.1.advanced.lnb.5.commandOrder=uct
config.Nims.1.advanced.lnb.5.commitedDiseqcCommand=AA
config.Nims.1.advanced.lnb.4.increased_voltage=true
config.Nims.1.advanced.lnb.4.uncommittedDiseqcCommand=1
config.Nims.1.advanced.lnb.4.diseqcMode=1_1
config.Nims.1.advanced.lnb.4.commandOrder=uct
config.Nims.1.advanced.lnb.4.commitedDiseqcCommand=BB
config.Nims.1.advanced.lnb.7.increased_voltage=true
config.Nims.1.advanced.lnb.7.uncommittedDiseqcCommand=2
config.Nims.1.advanced.lnb.7.diseqcMode=1_1
config.Nims.1.advanced.lnb.7.commandOrder=uct
config.Nims.1.advanced.lnb.7.commitedDiseqcCommand=BA
config.Nims.1.advanced.lnb.6.increased_voltage=true
config.Nims.1.advanced.lnb.6.uncommittedDiseqcCommand=2
config.Nims.1.advanced.lnb.6.diseqcMode=1_1
config.Nims.1.advanced.lnb.6.commandOrder=uct
config.Nims.1.advanced.lnb.6.commitedDiseqcCommand=AB
config.Nims.1.advanced.lnb.9.increased_voltage=true
config.Nims.1.advanced.lnb.9.uncommittedDiseqcCommand=3
config.Nims.1.advanced.lnb.9.diseqcMode=1_1
config.Nims.1.advanced.lnb.9.commandOrder=uct
config.Nims.1.advanced.lnb.9.commitedDiseqcCommand=AA
config.Nims.1.advanced.lnb.21.diseqcMode=1_1
config.Nims.1.advanced.lnb.21.uncommittedDiseqcCommand=6
config.Nims.1.advanced.lnb.21.increased_voltage=true
config.Nims.1.advanced.lnb.21.commandOrder=uct
config.Nims.1.advanced.lnb.21.commitedDiseqcCommand=AA
config.Nims.0.configMode=advanced
config.Nims.0.advanced.sats=3300
config.Nims.0.advanced.sat.3592.lnb=3
config.Nims.0.advanced.sat.450.lnb=18
config.Nims.0.advanced.sat.330.lnb=14
config.Nims.0.advanced.sat.192.lnb=9
config.Nims.0.advanced.sat.3530.lnb=1
config.Nims.0.advanced.sat.130.lnb=7
config.Nims.0.advanced.sat.235.lnb=10
config.Nims.0.advanced.sat.3300.lnb=20
config.Nims.0.advanced.sat.3550.lnb=2
config.Nims.0.advanced.sat.420.lnb=17
config.Nims.0.advanced.sat.282.lnb=12
config.Nims.0.advanced.sat.360.lnb=15
config.Nims.0.advanced.sat.260.lnb=11
config.Nims.0.advanced.sat.3520.lnb=1
config.Nims.0.advanced.sat.70.lnb=5
config.Nims.0.advanced.sat.90.lnb=6
config.Nims.0.advanced.sat.100.lnb=6
config.Nims.0.advanced.sat.3560.lnb=2
config.Nims.0.advanced.sat.48.lnb=4
config.Nims.0.advanced.sat.390.lnb=16
config.Nims.0.advanced.sat.530.lnb=19
config.Nims.0.advanced.lnb.11.diseqcMode=1_1
config.Nims.0.advanced.lnb.11.uncommittedDiseqcCommand=3
config.Nims.0.advanced.lnb.11.increased_voltage=true
config.Nims.0.advanced.lnb.11.commandOrder=uct
config.Nims.0.advanced.lnb.11.commitedDiseqcCommand=BA
config.Nims.0.advanced.lnb.10.diseqcMode=1_1
config.Nims.0.advanced.lnb.10.uncommittedDiseqcCommand=3
config.Nims.0.advanced.lnb.10.increased_voltage=true
config.Nims.0.advanced.lnb.10.commandOrder=uct
config.Nims.0.advanced.lnb.10.commitedDiseqcCommand=AB
config.Nims.0.advanced.lnb.12.diseqcMode=1_1
config.Nims.0.advanced.lnb.12.uncommittedDiseqcCommand=3
config.Nims.0.advanced.lnb.12.increased_voltage=true
config.Nims.0.advanced.lnb.12.commandOrder=uct
config.Nims.0.advanced.lnb.12.commitedDiseqcCommand=BB
config.Nims.0.advanced.lnb.15.increased_voltage=true
config.Nims.0.advanced.lnb.15.uncommittedDiseqcCommand=4
config.Nims.0.advanced.lnb.15.commandOrder=uct
config.Nims.0.advanced.lnb.15.lofh=10750
config.Nims.0.advanced.lnb.15.diseqcMode=1_1
config.Nims.0.advanced.lnb.15.commitedDiseqcCommand=BA
config.Nims.0.advanced.lnb.14.diseqcMode=1_1
config.Nims.0.advanced.lnb.14.uncommittedDiseqcCommand=4
config.Nims.0.advanced.lnb.14.increased_voltage=true
config.Nims.0.advanced.lnb.14.commandOrder=uct
config.Nims.0.advanced.lnb.14.commitedDiseqcCommand=AB
config.Nims.0.advanced.lnb.17.diseqcMode=1_1
config.Nims.0.advanced.lnb.17.uncommittedDiseqcCommand=5
config.Nims.0.advanced.lnb.17.increased_voltage=true
config.Nims.0.advanced.lnb.17.commandOrder=uct
config.Nims.0.advanced.lnb.17.commitedDiseqcCommand=AA
config.Nims.0.advanced.lnb.16.diseqcMode=1_1
config.Nims.0.advanced.lnb.16.uncommittedDiseqcCommand=4
config.Nims.0.advanced.lnb.16.increased_voltage=true
config.Nims.0.advanced.lnb.16.commandOrder=uct
config.Nims.0.advanced.lnb.16.commitedDiseqcCommand=BB
config.Nims.0.advanced.lnb.19.increased_voltage=true
config.Nims.0.advanced.lnb.19.uncommittedDiseqcCommand=5
config.Nims.0.advanced.lnb.19.diseqcMode=1_1
config.Nims.0.advanced.lnb.19.commandOrder=uct
config.Nims.0.advanced.lnb.19.commitedDiseqcCommand=BA
config.Nims.0.advanced.lnb.18.diseqcMode=1_1
config.Nims.0.advanced.lnb.18.uncommittedDiseqcCommand=5
config.Nims.0.advanced.lnb.18.increased_voltage=true
config.Nims.0.advanced.lnb.18.commandOrder=uct
config.Nims.0.advanced.lnb.18.commitedDiseqcCommand=AB
config.Nims.0.advanced.lnb.1.diseqcMode=1_1
config.Nims.0.advanced.lnb.1.uncommittedDiseqcCommand=1
config.Nims.0.advanced.lnb.1.increased_voltage=true
config.Nims.0.advanced.lnb.1.commandOrder=uct
config.Nims.0.advanced.lnb.1.commitedDiseqcCommand=AA
config.Nims.0.advanced.lnb.3.increased_voltage=true
config.Nims.0.advanced.lnb.3.uncommittedDiseqcCommand=1
config.Nims.0.advanced.lnb.3.diseqcMode=1_1
config.Nims.0.advanced.lnb.3.commandOrder=uct
config.Nims.0.advanced.lnb.3.commitedDiseqcCommand=BA
config.Nims.0.advanced.lnb.2.commitedDiseqcCommand=AB
config.Nims.0.advanced.lnb.2.diseqcMode=1_1
config.Nims.0.advanced.lnb.2.uncommittedDiseqcCommand=1
config.Nims.0.advanced.lnb.2.increased_voltage=true
config.Nims.0.advanced.lnb.2.commandOrder=uct
config.Nims.0.advanced.lnb.5.increased_voltage=true
config.Nims.0.advanced.lnb.5.uncommittedDiseqcCommand=2
config.Nims.0.advanced.lnb.5.diseqcMode=1_1
config.Nims.0.advanced.lnb.5.commandOrder=uct
config.Nims.0.advanced.lnb.5.commitedDiseqcCommand=AA
config.Nims.0.advanced.lnb.4.increased_voltage=true
config.Nims.0.advanced.lnb.4.uncommittedDiseqcCommand=1
config.Nims.0.advanced.lnb.4.diseqcMode=1_1
config.Nims.0.advanced.lnb.4.commandOrder=uct
config.Nims.0.advanced.lnb.4.commitedDiseqcCommand=BB
config.Nims.0.advanced.lnb.7.increased_voltage=true
config.Nims.0.advanced.lnb.7.uncommittedDiseqcCommand=2
config.Nims.0.advanced.lnb.7.diseqcMode=1_1
config.Nims.0.advanced.lnb.7.commandOrder=uct
config.Nims.0.advanced.lnb.7.commitedDiseqcCommand=BA
config.Nims.0.advanced.lnb.6.diseqcMode=1_1
config.Nims.0.advanced.lnb.6.uncommittedDiseqcCommand=2
config.Nims.0.advanced.lnb.6.increased_voltage=true
config.Nims.0.advanced.lnb.6.commandOrder=uct
config.Nims.0.advanced.lnb.6.commitedDiseqcCommand=AB
config.Nims.0.advanced.lnb.9.diseqcMode=1_1
config.Nims.0.advanced.lnb.9.uncommittedDiseqcCommand=3
config.Nims.0.advanced.lnb.9.increased_voltage=true
config.Nims.0.advanced.lnb.9.commandOrder=uct
config.Nims.0.advanced.lnb.9.commitedDiseqcCommand=AA
config.Nims.0.advanced.lnb.20.diseqcMode=1_1
config.Nims.0.advanced.lnb.20.uncommittedDiseqcCommand=8
config.Nims.0.advanced.lnb.20.increased_voltage=true
config.Nims.0.advanced.lnb.20.commandOrder=uct
config.Nims.0.advanced.lnb.20.commitedDiseqcCommand=AA

I am using default skin which is ready to use after installation.

vipersvcd · 5. Juli 2011, 17:52

Hi

I have the exact same problem On my DM800
I first notices it when I updated from an OE15 version of newnigma2 to OE16
And I have it in every version since then ,

I always used Cajton settings for years
And I think that his settings are the problem .

I did get a chance to test his settings o my DM800 using several other images
from other groups and all had the same issue with the log lists .

Did you ever got it solved ?
Did you find a settings list like cajton that does not have the problem ?

Or did you fins some other software that works good with cajton ?

I prefer to use cajton over newnigma2 , so no mind using other images ,

Thanks .

MartiniB · 5. Juli 2011, 19:56

try this, maibe it can help

after services autoscan i run small lamedb patcher
/etc/enigma2/lamedb_set_inversion.sh
(chmod 755)

Shell-Script

#!/bin/sh
#
fLAMEDB="/etc/enigma2/lamedb"
sed -f "$fLAMEDB".sed "$fLAMEDB">"$fLAMEDB".tmp
if [ -s "$fLAMEDB".tmp ]; then
mv "$fLAMEDB".tmp "$fLAMEDB"
else
echo ErRoR - Zero len "$fLAMEDB".tmp
fi

Alles anzeigen

which reads rulles from
/etc/enigma2/lamedb.sed
(chmod 644)

Quellcode

s#:48:2:0#:48:0:0#
s#:70:2:0#:70:0:0#
s#11919000:27500000:1:3:90:2:0#11919000:27500000:1:3:90:1:0#
s#:90:2:0#:90:0:0#
s#:100:2:0#:100:0:0#
s#11727000:27500000:1:3:130:2:0#11727000:27500000:1:3:130:1:0#
s#:130:2:0#:130:0:0#
s#12714000:5632000:1:3:158:2:0#12714000:5632000:1:3:158:1:0#
s#:158:2:0#:158:0:0#
s#:192:2:0#:192:0:0#
s#:235:2:0#:235:0:0#
s#:282:2:0#:282:0:0#
s#:360:2:0#:360:0:0#
s#:390:2:0#:390:0:0#
s#000:2:0:360:#000:0:0:360:#
s#000:2:1:360:#000:0:1:360:#
s#000:2:2:360:#000:0:2:360:#
s#000:2:3:360:#000:0:3:360:#
s#000:2:4:360:#000:0:4:360:#
s#000:2:5:360:#000:0:5:360:#
s#000:2:6:360:#000:0:6:360:#
s#000:3:0:360:#000:1:0:360:#
s#000:3:1:360:#000:1:1:360:#
s#000:3:2:360:#000:1:2:360:#
s#000:3:3:360:#000:1:3:360:#
s#000:3:4:360:#000:1:4:360:#
s#000:3:5:360:#000:1:5:360:#
s#000:3:6:360:#000:1:6:360:#
s#:400:2:0#:400:0:0#
s#:420:2:0#:420:0:0#
s#10974000:8150000:0:3:530:2:0#10974000:8150000:0:3:530:1:0#
s#:530:2:0#:530:0:0#
s#11512000:2617000:1:3:600:2:0#11512000:2617000:1:3:600:1:0#
s#:600:2:0#:600:0:0#
s#:750:2:0#:750:0:0#
s#:-300:2:0#:-300:0:0#
s#:-245:2:0#:-245:0:0#
s#:-220:2:0#:-220:0:0#
s#:-180:2:0#:-180:0:0#
s#:-150:2:0#:-150:0:0#
s#12661000:2170000:1:3:-125:2:0#12661000:2170000:1:3:-125:1:0#
s#:-125:2:0#:-125:0:0#
s#:-80:2:0#:-80:0:0#
s#:-50:2:0#:-50:0:0#
s#:-40:2:0#:-40:0:0#
s#:-8:2:0#:-8:0:0#
s#:011a0000:07f6:0002:130:0#:011a0000:07f6:0002:1:0#
s#^STREAM-#BBC\ Stream\ #

Alles anzeigen

after execute `killall -9 enigma2` or take away power

script resets values:
a) Inversion from Auto to particular
b) Circular polarities to linear
c) change Service Type for BBC Streams

vipersvcd · 5. Juli 2011, 20:53

Hi MartiniB

I created the 2 files placed them in /etc/enigma2/
Chmod them as yoo orders
And after running the command sh lamedb_set_inversion.sh
I got the error you see below .

OpenDreambox
dm800 login: root
root@dm800:~# cd /etc/enigma2/
root@dm800:/etc/enigma2# sh lamedb_set_inversion.sh
: not foundinversion.sh: line 3:
: not foundinversion.sh: line 5:
.sed': No such file or directorymedb
lamedb_set_inversion.sh: line 11: syntax error: unexpected "fi" (expecting "then
")
root@dm800:/etc/enigma2#

MartiniB · 6. Juli 2011, 06:56

@vipersvcd
execute /etc/enigma2/lamedb_set_inversion.sh
without cd /etc/enigma2/

vipersvcd · 6. Juli 2011, 07:14

Hi
I am a noob ., I guess I am missing something basic ,

OpenDreambox
dm800 login: root
root@dm800:~# execute /etc/enigma2/lamedb_set_inversion.sh
-sh: execute: not found
root@dm800:~# sh /etc/enigma2/lamedb_set_inversion.sh
: not found2/lamedb_set_inversion.sh: line 3:
: not found2/lamedb_set_inversion.sh: line 5:
.sed': No such file or directorymedb
/etc/enigma2/lamedb_set_inversion.sh: line 11: syntax error: unexpected "fi" (ex
pecting "then")
root@dm800:~#

MartiniB · 6. Juli 2011, 09:39

root@dm800:~# execute /etc/enigma2/lamedb_set_inversion.sh

root@dm800:~# /etc/enigma2/lamedb_set_inversion.sh

vipersvcd · 6. Juli 2011, 13:20

I tried again as I tried before with the Execute command , And get same result
Not Found .

[Blockierte Grafik: http://img706.imageshack.us/img706/2963/telnett.jpg]

[Blockierte Grafik: http://img819.imageshack.us/img819/2602/lamedbsh.jpg]

[Blockierte Grafik: http://img708.imageshack.us/img708/4268/listbx.jpg]

MartiniB · 6. Juli 2011, 14:28

Quellcode

*****************************
* http://www.newnigma2.to *
*****************************
* the next step is done *
*****************************
OpenDreambox
Dream8k_M4 login: root
Password:
root@Dream8k_M4:~# date
Wed Jul 6 15:26:09 EEST 2011
root@Dream8k_M4:~#
root@Dream8k_M4:~# /etc/enigma2/lamedb_set_inversion.sh
root@Dream8k_M4:~#
root@Dream8k_M4:~# date
Wed Jul 6 15:26:28 EEST 2011
root@Dream8k_M4:~#

Alles anzeigen

vipersvcd · 6. Juli 2011, 14:43

I first want to thank you for you help ,
But still it does not work for me I feel so stupid .
I do not understand what I am missing .
Did I put the files in the wrong place ?
Did I name them incorrectly ?
Why cant it find them ?
[Blockierte Grafik: http://img52.imageshack.us/img52/5161/68115199.jpg]

MartiniB · 6. Juli 2011, 14:57

tryed on 800
also no problems, just twice longer time spent

Quellcode

*****************************
* http://www.newnigma2.to *
*****************************
* the next step is done *
*****************************
OpenDreambox
dm800_Rich2 login:
dm800_Rich2 login: root
Password:
root@dm800_Rich2:~# date
Wed Jul 6 15:52:44 EEST 2011
root@dm800_Rich2:~#
root@dm800_Rich2:~# /etc/enigma2/lamedb_set_inversion.sh
root@dm800_Rich2:~#
root@dm800_Rich2:~# date
Wed Jul 6 15:53:23 EEST 2011
root@dm800_Rich2:~#
root@dm800_Rich2:~# cat /etc/enigma2/lamedb_set_inversion.sh
#!/bin/sh
# MartiniB
#
fLAMEDB="/etc/enigma2/lamedb"
sed -f "$fLAMEDB".sed "$fLAMEDB">"$fLAMEDB".tmp
if [ -s "$fLAMEDB".tmp ]; then
mv "$fLAMEDB".tmp "$fLAMEDB"
else
echo ErRoR - Zero len "$fLAMEDB".tmp
fi
root@dm800_Rich2:~#
root@dm800_Rich2:~# cat /etc/enigma2/lamedb.sed
s#:48:2:0#:48:0:0#
s#:70:2:0#:70:0:0#
s#11919000:27500000:1:3:90:2:0#11919000:27500000:1:3:90:1:0#
s#:90:2:0#:90:0:0#
s#:100:2:0#:100:0:0#
s#11727000:27500000:1:3:130:2:0#11727000:27500000:1:3:130:1:0#
s#:130:2:0#:130:0:0#
s#12714000:5632000:1:3:158:2:0#12714000:5632000:1:3:158:1:0#
s#:158:2:0#:158:0:0#
s#:192:2:0#:192:0:0#
s#:235:2:0#:235:0:0#
s#:282:2:0#:282:0:0#
s#:360:2:0#:360:0:0#
s#:390:2:0#:390:0:0#
s#000:2:0:360:#000:0:0:360:#
s#000:2:1:360:#000:0:1:360:#
s#000:2:2:360:#000:0:2:360:#
s#000:2:3:360:#000:0:3:360:#
s#000:2:4:360:#000:0:4:360:#
s#000:2:5:360:#000:0:5:360:#
s#000:2:6:360:#000:0:6:360:#
s#000:3:0:360:#000:1:0:360:#
s#000:3:1:360:#000:1:1:360:#
s#000:3:2:360:#000:1:2:360:#
s#000:3:3:360:#000:1:3:360:#
s#000:3:4:360:#000:1:4:360:#
s#000:3:5:360:#000:1:5:360:#
s#000:3:6:360:#000:1:6:360:#
s#:400:2:0#:400:0:0#
s#:420:2:0#:420:0:0#
s#10974000:8150000:0:3:530:2:0#10974000:8150000:0:3:530:1:0#
s#:530:2:0#:530:0:0#
s#11512000:2617000:1:3:600:2:0#11512000:2617000:1:3:600:1:0#
s#:600:2:0#:600:0:0#
s#:750:2:0#:750:0:0#
s#:-300:2:0#:-300:0:0#
s#:-245:2:0#:-245:0:0#
s#:-220:2:0#:-220:0:0#
s#:-180:2:0#:-180:0:0#
s#:-150:2:0#:-150:0:0#
s#12661000:2170000:1:3:-125:2:0#12661000:2170000:1:3:-125:1:0#
s#:-125:2:0#:-125:0:0#
s#:-80:2:0#:-80:0:0#
s#:-50:2:0#:-50:0:0#
s#:-40:2:0#:-40:0:0#
s#:-8:2:0#:-8:0:0#
s#:011a0000:07f6:0002:130:0#:011a0000:07f6:0002:1:0#
s#^STREAM-#BBC\ Stream\ #
root@dm800_Rich2:~#
root@dm800_Rich2:~#

Alles anzeigen

vipersvcd · 6. Juli 2011, 15:34

I run both the cat commands you did and recived the same reply as you ,

But when I try to run the sh file I get not found .

MartiniB · 6. Juli 2011, 17:44

have no idea

multiboot image?
problems with free space on device? check by command
df -h

vipersvcd · 6. Juli 2011, 20:41

dm800 login: root
root@dm800:~# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 60.0M 43.7M 16.3M 73% /
none 71.2M 8.0K 71.2M 0% /dev
shm 71.2M 0 71.2M 0% /dev/shm
/dev/mtdblock2 3.8M 2.2M 1.6M 58% /boot
tmpfs 71.2M 808.0K 70.4M 1% /var
tmpfs 71.2M 8.0K 71.2M 0% /tmp
/dev/sda1 149.0G 9.3G 139.7G 6% /media/hdd
root@dm800:~#

MartiniB · 7. Juli 2011, 09:42

1.
cant see file lamedb.sed in the enigma2.zip

2.
lamedb_set_inversion.sh contain window's style new line creators ("0D 0A" in hex view)
to fix it for unix style use commands
dos2unix /etc/enigma2/lamedb_set_inversion.sh
dos2unix /etc/enigma2/lamedb.sed

vipersvcd · 7. Juli 2011, 12:12

Hi

That is so strange the file was not in the zip ,
The command to it worked from telnet.
I copied both files again now using a proper FTP clinet like FileZilla
CHmod them as required and run the dos2unix commands on them.

And then I run the /etc/enigma2/lamedb_set_inversion.sh command again,
And this time it worked , it run and finished with no error , I can't check now if it helped - will check later to day and update.

Now I did notice something strange that I did not notice before ,
When I used FileZilla there is on other file named "lamedb" that has a size 0 ,
Is that ok/normal . this file can not be deleted , even if I try Filezilla say command success , but the file stays there .

[Blockierte Grafik: http://img21.imageshack.us/img21/1752/enigma2d.jpg]

MartiniB · 7. Juli 2011, 13:28

about zero len lamedb, show what you have on command
ls -l /etc/enigma2/

NewEnigma very slow on all channel list in DM8000

NewEnigma very slow on all channel list in DM8000

I Have the exact same problem

Shell-Script

Quellcode

Quellcode

Quellcode

Teilen