Hallo
als ich heute aus dem WE gekommen bin, habe ich meine Dream angemacht und sie bringt leider kein Bild
ich komme mit telnet rauf und umschalten der Kanäle kann ich auch.. nur das sie schwarz bleiben (bzw. das Bild zum hochfahren der Dream ist noch zu sehen)
Kann ich feststellen ob der Tuner kaputt ist oder sonst was defekt ist?
Hab nun nen anderen REceiver dran, da kommen Bilder...
Gruss
Thomas
mal nen auszug aus dmesg:
[4294700.463000] VIDEO0: framerate changed 3
[4294700.463000] VIDEO0: resolution changed (1280 720)
[4294700.463000] VIDEO0: aspect changed 3
[4294700.465000] set current avs auto aspect to 16:9
[4294700.465000] disable wss on display 0
[4294700.465000] disable wss on display 1
[4294700.465000] set current avs auto aspect to 16:9
[4294700.465000] disable wss on display 0
[4294700.465000] disable wss on display 1
[4294700.465000] set sb to 3(1)
[4294700.553000] VIDEO0: set blank to 0
[4294700.643000] enable tsm0
[4294700.829000] VIDEO0: stop decode
[4294700.829000] VIDEO0: set blank to 0
[4294700.829000] no decoder left in sync handling so disable xpt_sync
[4294705.959000] 5868 ms: 25
[4294707.370000] 1411 ms: 26
[4294710.096000] 2726 ms: 27
[4294710.118000] 22 ms: =s
[4294710.210000] 92 ms: 33 Starting /etc/rcS.d/S10tpmd...
[4294710.230000] 20 ms: =s
[4294710.673000] usbcore: registered new driver rt73
[4294710.917000]
[4294710.917000] _____ ____ _ ____
[4294710.917000] |__ / _| _ \ / \ / ___|
[4294710.917000] / / | | | | | |/ _ \ \___ \
[4294710.917000] / /| |_| | |_| / ___ \ ___) |
[4294710.917000] /____\__, |____/_/ \_\____/
[4294710.917000] |___/
[4294710.917000] ZD1211B - version 2.22.0.0-development
[4294710.918000] usbcore: registered new driver zd1211b
[4294711.017000] 787 ms: 35 Starting /etc/rcS.d/S20modutils.sh...
[4294711.037000] 20 ms: =s
[4294711.113000] 76 ms: 37 Starting /etc/rcS.d/S38devpts.sh...
[4294711.133000] 20 ms: =s
[4294714.780000] 3647 ms: 39 Starting /etc/rcS.d/S40networking...
[4294714.800000] 20 ms: =s
[4294725.938000] eth0 Link UP.
[4294727.066000] 12266 ms: 41 Starting /etc/rcS.d/S41rdate...
[4294727.088000] 22 ms: =s
[4294727.166000] 78 ms: 43 Starting /etc/rcS.d/S43portmap...
[4294731.155000] VIDEO0: set blank to 0
[4294731.282000] sync is off so we enable it
[4294731.282000] playback!
[4294731.282000] total video delay: 0 (0 ms)
[4294731.318000] VIDEO0: start decode
[4294731.353000] flush video decoder
[4294731.443000] VIDEO0: first pts 0x0
[4294731.552000] VIDEO0: set blank to 0
[4294731.554000] VIDEO0: stop decode
[4294731.555000] VIDEO0: set blank to 0
[4294731.555000] no decoder left in sync handling so disable xpt_sync
[4294735.475000] bcmfb: enable manual blit
[4294735.484000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
[4294738.081000] 10914 ms: =s
[4294738.092000] 11 ms: 50
[4294738.469000] 377 ms: 50
[4294738.557000] 88 ms: 50
[4294738.611000] 54 ms: 50
[4294739.790000] alps_bsbe2 is in powersave mode now
[4294739.859000] 1248 ms: 50
[4294740.499000] 640 ms: 51
[4294741.335000] 835 ms: 52
[4294741.620000] 285 ms: 53
[4294741.650000] 30 ms: 53
[4294741.654000] 4 ms: 53
[4294742.219000] 565 ms: 53
[4294742.224000] 5 ms: 54
[4294742.432000] 207 ms: 54
[4294743.228000] 796 ms: 54
[4294748.473000] 5245 ms: 55
[4294748.517000] 44 ms: 60
[4294748.522000] 5 ms: 60
[4294748.527000] 5 ms: 60
[4294748.564000] 37 ms: 60
[4294748.625000] 61 ms: 60
[4294750.816000] 2191 ms: 60
[4294750.822000] 6 ms: 62
[4294750.850000] 28 ms: 62
[4294751.401000] 551 ms: 62
[4294751.474000] 73 ms: 62
[4294751.567000] 93 ms: 62
[4294751.571000] 4 ms: 62
[4294751.578000] 7 ms: 62
[4294751.606000] 28 ms: 62
[4294756.294000] 4688 ms: 63
[4294756.299000] 5 ms: 67
[4294756.765000] 466 ms: 67
[4294756.769000] 4 ms: 67
[4294756.890000] 121 ms: 67
[4294756.898000] 8 ms: 68
[4294756.903000] 5 ms: 68
[4294756.919000] 16 ms: 68
[4294756.924000] JFFS2 notice: (704) check_node_data: wrong data CRC in data node at 0x036de800: read 0xab753c71, calculated 0x86f4ed9.
[4294756.959000] 40 ms: 68
[4294757.008000] 48 ms: 68
[4294757.013000] 5 ms: 68
[4294757.197000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
[4294757.870000] 857 ms: 68
[4294758.029000] 159 ms: 68
[4294758.083000] set current avs auto aspect to 4:3
[4294758.083000] disable wss on display 0
[4294758.083000] disable wss on display 1
[4294758.083000] set sb to 3(2)
[4294758.103000] set current avs auto aspect to 4:3
[4294758.103000] disable wss on display 0
[4294758.103000] disable wss on display 1
[4294758.104000] set sb to 3(2)
[4294758.108000] disable wss on display 0
[4294758.108000] set wss 8 on display 1
[4294758.145000] set input to 0
[4294758.145000] set fb to 2(0)
[4294758.145000] set current avs auto aspect to 4:3
[4294758.145000] disable wss on display 0
[4294758.145000] set wss 8 on display 1
[4294758.146000] set sb to 3(2)
[4294758.156000] set ac3 to passthrough
[4294758.174000] 145 ms: 69
[4294758.196000] 22 ms: 69
[4294758.342000] 146 ms: 69
[4294758.933000] 591 ms: 69
[4294759.052000] 119 ms: 69
[4294759.107000] 55 ms: 70
[4294762.468000] 3361 ms: 70
[4294762.482000] 14 ms: 73
[4294762.506000] 24 ms: 73
[4294766.101000] JFFS2 notice: (704) check_node_data: wrong data CRC in data node at 0x02a92200: read 0xa5e776bb, calculated 0xbf1cbc61.
[4294766.604000] JFFS2 notice: (704) check_node_data: wrong data CRC in data node at 0x02c85c00: read 0x62883e29, calculated 0x7ca765e9.
[4294766.662000] JFFS2 notice: (704) check_node_data: wrong data CRC in data node at 0x03373600: read 0xb4e23d81, calculated 0x8feae207.
[4294768.283000] set current avs auto aspect to 16:9
[4294768.283000] disable wss on display 0
[4294768.283000] set wss 7 on display 1
[4294768.284000] set sb to 3(1)
[4294768.403000] set current avs auto aspect to 16:9
[4294768.403000] disable wss on display 0
[4294768.403000] set wss 7 on display 1
[4294768.403000] set sb to 3(1)
[4294768.407000] disable wss on display 0
[4294768.407000] set wss 7 on display 1
[4294768.410000] set current avs auto aspect to 16:9
[4294768.410000] disable wss on display 0
[4294768.410000] set wss 7 on display 1
[4294768.410000] set sb to 3(1)
[4294768.428000] set current avs auto aspect to 16:9
[4294768.428000] disable wss on display 0
[4294768.429000] set wss 7 on display 1
[4294768.429000] set sb to 3(1)
[4294768.433000] set current avs auto aspect to 16:9
[4294768.433000] disable wss on display 0
[4294768.433000] set wss 7 on display 1
[4294768.433000] set sb to 3(1)
[4294768.437000] disable wss on display 0
[4294768.438000] set wss 7 on display 1
[4294768.441000] set current avs auto aspect to 16:9
[4294768.441000] disable wss on display 0
[4294768.442000] set wss 7 on display 1
[4294768.442000] set sb to 3(1)
[4294768.455000] set current avs auto aspect to 16:9
[4294768.455000] disable wss on display 0
[4294768.456000] set wss 7 on display 1
[4294768.456000] set sb to 3(1)
[4294768.459000] set current avs auto aspect to 16:9
[4294768.459000] disable wss on display 0
[4294768.459000] set wss 7 on display 1
[4294768.460000] set sb to 3(1)
[4294768.464000] disable wss on display 0
[4294768.464000] set wss 7 on display 1
[4294768.467000] set current avs auto aspect to 16:9
[4294768.467000] disable wss on display 0
[4294768.468000] set wss 7 on display 1
[4294768.468000] set sb to 3(1)
[4294768.481000] set current avs auto aspect to 16:9
[4294768.481000] disable wss on display 0
[4294768.481000] set wss 7 on display 1
[4294768.481000] set sb to 3(1)
[4294768.486000] set current avs auto aspect to 16:9
[4294768.486000] disable wss on display 0
[4294768.486000] set wss 7 on display 1
[4294768.486000] set sb to 3(1)
[4294768.490000] disable wss on display 0
[4294768.490000] set wss 7 on display 1
[4294768.493000] set current avs auto aspect to 16:9
[4294768.493000] disable wss on display 0
[4294768.493000] set wss 7 on display 1
[4294768.493000] set sb to 3(1)
[4294768.505000] set current avs auto aspect to 16:9
[4294768.506000] disable wss on display 0
[4294768.506000] set wss 7 on display 1
[4294768.506000] set sb to 3(1)
[4294768.510000] set current avs auto aspect to 16:9
[4294768.510000] disable wss on display 0
[4294768.510000] set wss 7 on display 1
[4294768.510000] set sb to 3(1)
[4294768.529000] set current avs auto aspect to 16:9
[4294768.529000] disable wss on display 0
[4294768.529000] set wss 7 on display 1
[4294768.529000] set sb to 3(1)
[4294768.534000] set current avs auto aspect to 16:9
[4294768.534000] disable wss on display 0
[4294768.534000] set wss 7 on display 1
[4294768.534000] set sb to 3(1)
[4294768.538000] disable wss on display 0
[4294768.538000] set wss 7 on display 1
[4294768.542000] set current avs auto aspect to 16:9
[4294768.542000] disable wss on display 0
[4294768.542000] set wss 7 on display 1
[4294768.543000] set sb to 3(1)
[4294775.978000] 13471 ms: 73
[4294778.141000] set mute 0 (000) 1
[4294780.121000] 4143 ms: 95
[4294780.273000] 152 ms: 99
[4294780.382000] 109 ms: 99
[4294780.431000] 49 ms: 99
[4294803.257000] JFFS2 notice: (19) check_node_data: wrong data CRC in data node at 0x0383e600: read 0xd4dbe345, calculated 0x6d089c1e.
[4294882.805000] JFFS2 notice: (19) check_node_data: wrong data CRC in data node at 0x028dee00: read 0xcdc859d4, calculated 0xf9e1d654.
root@dm800:~#
als ich heute aus dem WE gekommen bin, habe ich meine Dream angemacht und sie bringt leider kein Bild
ich komme mit telnet rauf und umschalten der Kanäle kann ich auch.. nur das sie schwarz bleiben (bzw. das Bild zum hochfahren der Dream ist noch zu sehen)Kann ich feststellen ob der Tuner kaputt ist oder sonst was defekt ist?
Hab nun nen anderen REceiver dran, da kommen Bilder...
Gruss
Thomas
mal nen auszug aus dmesg:
[4294700.463000] VIDEO0: framerate changed 3
[4294700.463000] VIDEO0: resolution changed (1280 720)
[4294700.463000] VIDEO0: aspect changed 3
[4294700.465000] set current avs auto aspect to 16:9
[4294700.465000] disable wss on display 0
[4294700.465000] disable wss on display 1
[4294700.465000] set current avs auto aspect to 16:9
[4294700.465000] disable wss on display 0
[4294700.465000] disable wss on display 1
[4294700.465000] set sb to 3(1)
[4294700.553000] VIDEO0: set blank to 0
[4294700.643000] enable tsm0
[4294700.829000] VIDEO0: stop decode
[4294700.829000] VIDEO0: set blank to 0
[4294700.829000] no decoder left in sync handling so disable xpt_sync
[4294705.959000] 5868 ms: 25
[4294707.370000] 1411 ms: 26
[4294710.096000] 2726 ms: 27
[4294710.118000] 22 ms: =s
[4294710.210000] 92 ms: 33 Starting /etc/rcS.d/S10tpmd...
[4294710.230000] 20 ms: =s
[4294710.673000] usbcore: registered new driver rt73
[4294710.917000]
[4294710.917000] _____ ____ _ ____
[4294710.917000] |__ / _| _ \ / \ / ___|
[4294710.917000] / / | | | | | |/ _ \ \___ \
[4294710.917000] / /| |_| | |_| / ___ \ ___) |
[4294710.917000] /____\__, |____/_/ \_\____/
[4294710.917000] |___/
[4294710.917000] ZD1211B - version 2.22.0.0-development
[4294710.918000] usbcore: registered new driver zd1211b
[4294711.017000] 787 ms: 35 Starting /etc/rcS.d/S20modutils.sh...
[4294711.037000] 20 ms: =s
[4294711.113000] 76 ms: 37 Starting /etc/rcS.d/S38devpts.sh...
[4294711.133000] 20 ms: =s
[4294714.780000] 3647 ms: 39 Starting /etc/rcS.d/S40networking...
[4294714.800000] 20 ms: =s
[4294725.938000] eth0 Link UP.
[4294727.066000] 12266 ms: 41 Starting /etc/rcS.d/S41rdate...
[4294727.088000] 22 ms: =s
[4294727.166000] 78 ms: 43 Starting /etc/rcS.d/S43portmap...
[4294731.155000] VIDEO0: set blank to 0
[4294731.282000] sync is off so we enable it
[4294731.282000] playback!
[4294731.282000] total video delay: 0 (0 ms)
[4294731.318000] VIDEO0: start decode
[4294731.353000] flush video decoder
[4294731.443000] VIDEO0: first pts 0x0
[4294731.552000] VIDEO0: set blank to 0
[4294731.554000] VIDEO0: stop decode
[4294731.555000] VIDEO0: set blank to 0
[4294731.555000] no decoder left in sync handling so disable xpt_sync
[4294735.475000] bcmfb: enable manual blit
[4294735.484000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
[4294738.081000] 10914 ms: =s
[4294738.092000] 11 ms: 50
[4294738.469000] 377 ms: 50
[4294738.557000] 88 ms: 50
[4294738.611000] 54 ms: 50
[4294739.790000] alps_bsbe2 is in powersave mode now
[4294739.859000] 1248 ms: 50
[4294740.499000] 640 ms: 51
[4294741.335000] 835 ms: 52
[4294741.620000] 285 ms: 53
[4294741.650000] 30 ms: 53
[4294741.654000] 4 ms: 53
[4294742.219000] 565 ms: 53
[4294742.224000] 5 ms: 54
[4294742.432000] 207 ms: 54
[4294743.228000] 796 ms: 54
[4294748.473000] 5245 ms: 55
[4294748.517000] 44 ms: 60
[4294748.522000] 5 ms: 60
[4294748.527000] 5 ms: 60
[4294748.564000] 37 ms: 60
[4294748.625000] 61 ms: 60
[4294750.816000] 2191 ms: 60
[4294750.822000] 6 ms: 62
[4294750.850000] 28 ms: 62
[4294751.401000] 551 ms: 62
[4294751.474000] 73 ms: 62
[4294751.567000] 93 ms: 62
[4294751.571000] 4 ms: 62
[4294751.578000] 7 ms: 62
[4294751.606000] 28 ms: 62
[4294756.294000] 4688 ms: 63
[4294756.299000] 5 ms: 67
[4294756.765000] 466 ms: 67
[4294756.769000] 4 ms: 67
[4294756.890000] 121 ms: 67
[4294756.898000] 8 ms: 68
[4294756.903000] 5 ms: 68
[4294756.919000] 16 ms: 68
[4294756.924000] JFFS2 notice: (704) check_node_data: wrong data CRC in data node at 0x036de800: read 0xab753c71, calculated 0x86f4ed9.
[4294756.959000] 40 ms: 68
[4294757.008000] 48 ms: 68
[4294757.013000] 5 ms: 68
[4294757.197000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
[4294757.870000] 857 ms: 68
[4294758.029000] 159 ms: 68
[4294758.083000] set current avs auto aspect to 4:3
[4294758.083000] disable wss on display 0
[4294758.083000] disable wss on display 1
[4294758.083000] set sb to 3(2)
[4294758.103000] set current avs auto aspect to 4:3
[4294758.103000] disable wss on display 0
[4294758.103000] disable wss on display 1
[4294758.104000] set sb to 3(2)
[4294758.108000] disable wss on display 0
[4294758.108000] set wss 8 on display 1
[4294758.145000] set input to 0
[4294758.145000] set fb to 2(0)
[4294758.145000] set current avs auto aspect to 4:3
[4294758.145000] disable wss on display 0
[4294758.145000] set wss 8 on display 1
[4294758.146000] set sb to 3(2)
[4294758.156000] set ac3 to passthrough
[4294758.174000] 145 ms: 69
[4294758.196000] 22 ms: 69
[4294758.342000] 146 ms: 69
[4294758.933000] 591 ms: 69
[4294759.052000] 119 ms: 69
[4294759.107000] 55 ms: 70
[4294762.468000] 3361 ms: 70
[4294762.482000] 14 ms: 73
[4294762.506000] 24 ms: 73
[4294766.101000] JFFS2 notice: (704) check_node_data: wrong data CRC in data node at 0x02a92200: read 0xa5e776bb, calculated 0xbf1cbc61.
[4294766.604000] JFFS2 notice: (704) check_node_data: wrong data CRC in data node at 0x02c85c00: read 0x62883e29, calculated 0x7ca765e9.
[4294766.662000] JFFS2 notice: (704) check_node_data: wrong data CRC in data node at 0x03373600: read 0xb4e23d81, calculated 0x8feae207.
[4294768.283000] set current avs auto aspect to 16:9
[4294768.283000] disable wss on display 0
[4294768.283000] set wss 7 on display 1
[4294768.284000] set sb to 3(1)
[4294768.403000] set current avs auto aspect to 16:9
[4294768.403000] disable wss on display 0
[4294768.403000] set wss 7 on display 1
[4294768.403000] set sb to 3(1)
[4294768.407000] disable wss on display 0
[4294768.407000] set wss 7 on display 1
[4294768.410000] set current avs auto aspect to 16:9
[4294768.410000] disable wss on display 0
[4294768.410000] set wss 7 on display 1
[4294768.410000] set sb to 3(1)
[4294768.428000] set current avs auto aspect to 16:9
[4294768.428000] disable wss on display 0
[4294768.429000] set wss 7 on display 1
[4294768.429000] set sb to 3(1)
[4294768.433000] set current avs auto aspect to 16:9
[4294768.433000] disable wss on display 0
[4294768.433000] set wss 7 on display 1
[4294768.433000] set sb to 3(1)
[4294768.437000] disable wss on display 0
[4294768.438000] set wss 7 on display 1
[4294768.441000] set current avs auto aspect to 16:9
[4294768.441000] disable wss on display 0
[4294768.442000] set wss 7 on display 1
[4294768.442000] set sb to 3(1)
[4294768.455000] set current avs auto aspect to 16:9
[4294768.455000] disable wss on display 0
[4294768.456000] set wss 7 on display 1
[4294768.456000] set sb to 3(1)
[4294768.459000] set current avs auto aspect to 16:9
[4294768.459000] disable wss on display 0
[4294768.459000] set wss 7 on display 1
[4294768.460000] set sb to 3(1)
[4294768.464000] disable wss on display 0
[4294768.464000] set wss 7 on display 1
[4294768.467000] set current avs auto aspect to 16:9
[4294768.467000] disable wss on display 0
[4294768.468000] set wss 7 on display 1
[4294768.468000] set sb to 3(1)
[4294768.481000] set current avs auto aspect to 16:9
[4294768.481000] disable wss on display 0
[4294768.481000] set wss 7 on display 1
[4294768.481000] set sb to 3(1)
[4294768.486000] set current avs auto aspect to 16:9
[4294768.486000] disable wss on display 0
[4294768.486000] set wss 7 on display 1
[4294768.486000] set sb to 3(1)
[4294768.490000] disable wss on display 0
[4294768.490000] set wss 7 on display 1
[4294768.493000] set current avs auto aspect to 16:9
[4294768.493000] disable wss on display 0
[4294768.493000] set wss 7 on display 1
[4294768.493000] set sb to 3(1)
[4294768.505000] set current avs auto aspect to 16:9
[4294768.506000] disable wss on display 0
[4294768.506000] set wss 7 on display 1
[4294768.506000] set sb to 3(1)
[4294768.510000] set current avs auto aspect to 16:9
[4294768.510000] disable wss on display 0
[4294768.510000] set wss 7 on display 1
[4294768.510000] set sb to 3(1)
[4294768.529000] set current avs auto aspect to 16:9
[4294768.529000] disable wss on display 0
[4294768.529000] set wss 7 on display 1
[4294768.529000] set sb to 3(1)
[4294768.534000] set current avs auto aspect to 16:9
[4294768.534000] disable wss on display 0
[4294768.534000] set wss 7 on display 1
[4294768.534000] set sb to 3(1)
[4294768.538000] disable wss on display 0
[4294768.538000] set wss 7 on display 1
[4294768.542000] set current avs auto aspect to 16:9
[4294768.542000] disable wss on display 0
[4294768.542000] set wss 7 on display 1
[4294768.543000] set sb to 3(1)
[4294775.978000] 13471 ms: 73
[4294778.141000] set mute 0 (000) 1
[4294780.121000] 4143 ms: 95
[4294780.273000] 152 ms: 99
[4294780.382000] 109 ms: 99
[4294780.431000] 49 ms: 99
[4294803.257000] JFFS2 notice: (19) check_node_data: wrong data CRC in data node at 0x0383e600: read 0xd4dbe345, calculated 0x6d089c1e.
[4294882.805000] JFFS2 notice: (19) check_node_data: wrong data CRC in data node at 0x028dee00: read 0xcdc859d4, calculated 0xf9e1d654.
root@dm800:~#
