[gelöst] sd card wird nicht erkannt

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • ... geht aber immer noch nicht

      mount /dev/mmcblk1p1 /media/sdcard/
      mount: wrong fs type, bad option, bad superblock on /dev/mmcblk1p1,
      missing codepage or helper program, or other error

      In some cases useful info is found in syslog - try
      dmesg | tail or so.


      dmesg

      Quellcode

      1. [84335.239611@0] EXT4-fs error (device mmcblk1p1): ext4_find_extent:921: inode #8: comm mount: pblk 65044479 bad header/extent: invalid magic - magic 0, entries 0, max 0(0), depth 0(0)
      2. [84335.242916@0] jbd2_journal_init_inode: Cannot locate journal superblock
      3. [84335.245028@0] EXT4-fs (mmcblk1p1): Could not load journal inode
      4. [84346.053230@0] EXT4-fs (mmcblk1): ext4_check_descriptors: Block bitmap for group 128 overlaps superblock
      5. [84346.053681@0] EXT4-fs (mmcblk1): group descriptors corrupted!
      ich habe folgendes durchgeführt:
      fsck.ext4 /dev/mmcblk1p1

      Quellcode

      1. [ 447.483549@2] sd: req failed (CMD25): -110, retrying...
      2. [ 581.548784@0] EXT4-fs error (device mmcblk1p1): ext4_find_extent:921: inode #8: comm mount: pblk 65044479 bad header/extent: invalid magic - magic 0, entries 0, max 0(0), depth 0(0)
      3. [ 581.600810@0] jbd2_journal_init_inode: Cannot locate journal superblock
      4. [ 581.600947@0] EXT4-fs (mmcblk1p1): Could not load journal inode
      5. [ 728.490488@1] EXT4-fs error (device mmcblk1p1): ext4_find_extent:921: inode #8: comm mount: pblk 65044479 bad header/extent: invalid magic - magic 0, entries 0, max 0(0), depth 0(0)
      6. [ 728.493753@1] jbd2_journal_init_inode: Cannot locate journal superblock
      7. [ 728.493876@1] EXT4-fs (mmcblk1p1): Could not load journal inode
      8. root@dream_one:~$

      parted -l

      Error: /dev/mmcblk0rpmb: unrecognised disk label
      Warning: Error fsyncing/closing /dev/mmcblk0rpmb: Input/output error
      Retry/Ignore? i
      Model: Generic SD/MMC Storage Card (sd/mmc)
      Disk /dev/mmcblk0rpmb: 4194kB
      Sector size (logical/physical): 512B/512B
      Partition Table: unknown
      Disk Flags:

      Model: SD APPSD (sd/mmc)
      Disk /dev/mmcblk1: 537GB
      Sector size (logical/physical): 512B/512B
      Partition Table: msdos
      Disk Flags:

      Number Start End Size Type File system Flags
      1 8192B 537GB 537GB primary ext4


      Error: /dev/mmcblk0boot0: unrecognised disk label
      Model: Generic SD/MMC Storage Card (sd/mmc)
      Disk /dev/mmcblk0boot0: 4194kB
      Sector size (logical/physical): 512B/512B
      Partition Table: unknown
      Disk Flags:

      Error: /dev/mmcblk0boot1: unrecognised disk label
      Model: Generic SD/MMC Storage Card (sd/mmc)
      Disk /dev/mmcblk0boot1: 4194kB
      Sector size (logical/physical): 512B/512B
      Partition Table: unknown
      Disk Flags:

      Error: /dev/mmcblk0: unrecognised disk label
      Model: MMC AJTD4R (sd/mmc)
      Disk /dev/mmcblk0: 15,6GB
      Sector size (logical/physical): 512B/512B
      Partition Table: unknown
      Disk Flags:

      Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von tajlor ()

    • Sorry was sind das für komische Antworten die hier gegeben werden!?
      Hier soll geholfen werden und nicht klug geschissen werden ; zumindest ist das meine Erwartungshaltung an ein Forum.

      Nicht dass du es nicht schon wüsstest aber evtl. für andere die daran interessiert sind / das gleiche Problem haben

      usage: fdisk [-ieu] [-f mbrboot] [-c cyl -h head -s sect] [-S size] [-r] [-a style] disk
      -i: initialize disk with new MBR
      -u: update MBR code, preserve partition table
      -e: edit MBRs on disk interactively
      -f: specify non-standard MBR template
      -chs: specify disk geometry
      -S: specify disk size
      -r: read partition specs from stdin (implies -i)
      -a: auto-partition with the given style
      -d: dump partition table
      -y: don't ask any questions
      -t: test if disk is partitioned

      Womit meine Frage mitnichten beantwortet wurde!

      => Was ist daran verkehrt an diesem Befehl, um die sd Karte ext4 zu formatieren?
      • mkfs.ext4 -L sd /dev/mmcblk1p1


      Ja es ist off topic da möglicherweise Linux und nichts mit der One zu tun hat, dennoch:
      hier sind wenige Experten und viele wie ich die eben keine Experten sind und Hilfe benötigen.

      Und falls ich vergessen haben sollte bitte zu sagen:
      Ich bitte um Hilfe

      Vielen Dank
    • Es geht doch um "mkfs.ext4".

      Quellcode

      1. ***************************** * http://www.newnigma2.to * ***************************** * the next step is done * ***************************** opendreambox 2.5.0 dm920 dm920 login: root Password: ############################################################################## # # # This is a Dreambox # # # # with newnigma2.to # # # # Unauthorized access to this system is prohibited ! # # # # This system is actively monitored and all connections may be logged. # # By accessing this system, you consent to this monitoring. # # # ############################################################################## Last login: Thu Feb 6 21:00:59 +0100 2020 on /dev/pts/0. root@dm920:~$ mkfs.ext4 Usage: mkfs.ext4 [-c|-l filename] [-b block-size] [-C cluster-size] [-i bytes-per-inode] [-I inode-size] [-J journal-options] [-G flex-group-size] [-N number-of-inodes] [-d root-directory] [-m reserved-blocks-percentage] [-o creator-os] [-g blocks-per-group] [-L volume-label] [-M last-mounted-directory] [-O feature[,...]] [-r fs-revision] [-E extended-option[,...]] [-t fs-type] [-T usage-type ] [-U UUID] [-e errors_behavior][-z undo_file] [-jnqvDFKSV] device [blocks-count] root@dm920:~$
      Und da ist "-t" "fs-type".
    • Mit t setzt man IM fdisk den Type einer Partition, so wie man dort mit n eine neue anlegt oder mit d deletet.

      Mit den commandline Optionen beim Aufruf vom fdisk oder mkfs hat das nichts zu tun. Weswegen ich dir auch vom t Befehl und eben nicht der t Option geschrieben habe.

      Und wenn du keine Antworten willst solltest du nicht fragen :D

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von Lost in Space ()

    • Hallo,

      bin gerade dran die SD karte lauffähig zu bekommen. Bei dem letzten befehl kommt diese Meldung

      No such file or directory


      Quellcode

      1. root@dreambox:~$ mkfs.ext4 -L sd /dev/mmcblk1p1
      2. mke2fs 1.43.4 (31-Jan-2017)
      3. /dev/mmcblk1p1 contains a ext4 file system labelled 'sd'
      4. created on Wed Sep 23 16:14:37 2020
      5. Proceed anyway? (y,N) y
      6. Creating filesystem with 31213056 4k blocks and 7806976 inodes
      7. Filesystem UUID: 4519ccfa-9efe-4b4d-be54-b23dbaacc078
      8. Superblock backups stored on blocks:
      9. 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
      10. 4096000, 7962624, 11239424, 20480000, 23887872
      11. Allocating group tables: done
      12. Writing inode tables: done
      13. Creating journal (131072 blocks): done
      14. Writing superblocks and filesystem accounting information: done
      15. root@dreambox:~$ blkid
      16. /dev/dreambox-rootfs: LABEL="dreambox-rootfs" UUID="eebd495f-dd67-49a8-9751-bfc3fdfbecde" TYPE="ext4"
      17. /dev/dreambox-data: LABEL="dreambox-data" UUID="a5a739cd-594f-4a7b-a281-87bdba1eaba1" TYPE="ext4"
      18. /dev/mmcblk1p1: LABEL="sd" UUID="4519ccfa-9efe-4b4d-be54-b23dbaacc078" TYPE="ext4" PARTUUID="8a90d609-01"
      19. /dev/mmcblk1: PTUUID="8a90d609" PTTYPE="dos"
      20. root@dreambox:~$ mkdir /media/sdcard
      21. mkdir: can't create directory '/media/sdcard': File exists
      22. root@dreambox:~$ ^C
      23. root@dreambox:~$ /dev/disk/by-uuid/4519ccfa-9efe-4b4d-be54-b23dbaacc078 /media/sdcard auto auto,nofail 0 0
      24. -bash: /dev/disk/by-uuid/4519ccfa-9efe-4b4d-be54-b23dbaacc078: No such file or directory
      25. root@dreambox:~$ /dev/disk/by-uuid/4519ccfa-9efe-4b4d-be54-b23dbaacc078 /media/sdcard auto auto,nofail 0 0
      26. -bash: /dev/disk/by-uuid/4519ccfa-9efe-4b4d-be54-b23dbaacc078: No such file or directory
      27. root@dreambox:~$ ^C
      28. root@dreambox:~$
      Alles anzeigen
      Kann mir jemand helfen?
    • Das: dev/disk/by-uuid/4519ccfa-9efe-4b4d-be54-b23dbaacc078 /media/sdcard auto auto,nofail 0 0
      ist kein Befehl. Das ist der Eintrag der in die fstab kommt, um die Karte einzuhängen.

      Aufnahme/Timer/SD-Karte schrieb:

      Wie verwende ich eine SD-Karte?
      (nur DM7080, DM9x0, ONE; der SD-Cardreader der DM820 ist im Treiber deaktiviert und kann derzeit nicht genutzt werden)

      Die SD-Karte ist seitens Dream Property im Gerätemanager blacklisted und muss manuell gemountet werden:
      - Karte in ext4 formatieren (mkfs.ext4 -L sd /dev/mmcblk1p1)
      - auf der Konsole: blkid
      Ausgabe sieht z.B. so aus: /dev/mmcblk1p1: LABEL="sd" UUID="5aa5fb10-2326-4033-b821-71c2f349fd51" TYPE="ext4" PARTUUID="000c7755-01"

      Verzeichnis anlegen per: mkdir /media/sdcard
      UUID aus der Ausgabe oben kopieren und einen Eintrag in der /etc/fstab nach folgendem Muster anlegen:

      /dev/disk/by-uuid/5aa5fb10-2326-4033-b821-71c2f349fd51 /media/sdcard auto auto,nofail 0 0

      Beispiel des Inhalts einer fstab:

      rootfs / rootfs rw,relatime 0 1
      proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
      sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
      devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620 0 0
      tmpfs /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0
      tmpfs /run tmpfs rw,nosuid,nodev,relatime,mode=755 0 0
      tmpfs /tmp tmpfs rw,relatime 0 0
      tmpfs /var/volatile tmpfs rw,relatime,mode=755 0 0
      /dev/disk/by-label/dreambox-data /data auto noauto,x-systemd.automount,nofail 0 0
      /dev/disk/by-uuid/ece15f00-caa9-4276-b8c3-18931b06c3ae /media/hdd auto auto,nofail 0 0
      /dev/disk/by-uuid/5aa5fb10-2326-4033-b821-71c2f349fd51 /media/sdcard auto auto,nofail 0 0
    • Was machst du da jetzt?
      Laut deiner Ausgabe in Beitrag 29 war bereits in ext4 formatiert, so wie es sein soll, dann hast du nochmal in ext4 formatiert, was nicht schlimm ist und jetzt ist die Karte auf einmal in ntfs?
      Die aktuelle Fehlermeldung bedeutet, dass nicht formatiert werden kann, weil der Datenträger eingehängt ist.

      Die Karte sollte in einem Linuxdateisystem formatiert sein, vorzugsweise in ext4. Mit welchem Gerät das geschieht ist egal. Wenn sie in ext4 formatiert ist, wird sie mit einem Eintrag in der /etc/fstab eingehängt. Um mehr gehts bei der ganzen Sache nicht.
    • Ok alles auf Anfang. Sorry! Bin selber verwirrt.

      Habe die Karte nun am Laptop in Ext4 formatiert. SD Karte in die Box gesteckt --> neu gestartet.

      Nun logge ich mich ein mit Putty Telnet

      Login --> Root

      Jetzt gebe ich ein mkfs.ext4 -L sd /dev/mmcblk1p1

      Quellcode

      1. root@dreambox:~$ mkfs.ext4 -L sd /dev/mmcblk1p1
      2. mke2fs 1.43.4 (31-Jan-2017)
      3. /dev/mmcblk1p1 contains a ext4 file system labelled 'sdcard'
      4. last mounted on Thu Jan 1 01:00:02 1970
      5. Proceed anyway? (y,N) y
      6. /dev/mmcblk1p1 is mounted; will not make a filesystem here!
      7. root@dreambox:~$
    • Ja, die Karte ist im Gerätemanager blacklistet. Daran ändert sich nichts.
      Nachdem der Eintrag für die Karte in der fstab erstellt wurde, die Box neu starten und dann kannst du mit dem Befehl mount nachsehen, ob alles funktioniert hat und die Karte eingehängt ist.
      Beispiel:

      root@dm920:~$ mount
      /dev/mmcblk0p2 on / type ext4 (rw,relatime,data=ordered)
      devtmpfs on /dev type devtmpfs (rw,relatime,size=503448k,nr_inodes=55117,mode=755)
      sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
      proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
      tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev,relatime)
      devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620)
      tmpfs on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755)
      tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
      cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
      cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
      cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
      cgroup on /sys/fs/cgroup/net_cls type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls)
      cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
      cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
      systemd-1 on /data type autofs (rw,relatime,fd=23,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
      mqueue on /dev/mqueue type mqueue (rw,relatime)
      tmpfs on /var/volatile type tmpfs (rw,relatime,mode=755)
      tmpfs on /tmp type tmpfs (rw,relatime)
      /dev/sda1 on /media/hdd type ext4 (rw,relatime,data=ordered)
      /dev/mmcblk1 on /media/sdcard type ext4 (rw,relatime,data=ordered)
      fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
      /etc/auto.misc on /misc type autofs (rw,relatime,fd=6,pgrp=327,timeout=300,minproto=5,maxproto=5,indirect)
      -hosts on /net type autofs (rw,relatime,fd=12,pgrp=327,timeout=300,minproto=5,maxproto=5,indirect)
      /etc/auto.hotplug on /autofs type autofs (rw,relatime,fd=18,pgrp=327,timeout=300,minproto=5,maxproto=5,indirect)
      /dev/mmcblk0p3 on /data type ext4 (rw,relatime,data=ordered)
      none on /dev/cpuset type cgroup (rw,relatime,cpuset)
    • [gelöst] sd card wird nicht erkannt

      Hallo, ich habe nochmal eine Frage zu meinem alten Problem. Sorry :D

      Musste leider 3-4x neu aufsetzen in den letzten 2 Tagen. hab nun alles wieder eingerichtet, inkl Plugins, Senderliste usw... Jetzt rennt alles perfekt bis auf die SD Karte :D

      Hab alles wieder nach der Anleitung gemacht, sehe es auch wieder wenn ich mount eingebe aber Timeshift funktioniert nicht. Ich möchte als nächstes einen Film rüber schieben und testen ob es geht aber wieso geht Timeshift nicht?