DM900; beim Abspielen (mit SAT-TWIN-Tuner) eines FILMES; beim Abspielen ruckelt/hängen diese (1 - 6 sec)

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • DM900; beim Abspielen (mit SAT-TWIN-Tuner) eines FILMES; beim Abspielen ruckelt/hängen diese (1 - 6 sec)

      Hallo Zusammen,

      habe ein Problem mit meiner DM900.
      Fehler-Beschreibung:
      Nach einer Aufnahme (via SAT) vom TV (tritt bei allen TV Sender auf) ruckelt die Aufnahme, beim Abspielen sporadisch derart,
      dass der FILM ~ 1 sec stehen bleibt oder sogar 5-8 sec stockt, so dass ich spulen muss um an die nächste flüssige Stelle zu gelangen.
      Eingrenzung des Problemes: ! Manchmal tritt es gar nicht auf; manchmal mehrmals im FILM - jedoch ist nur ein ruckeln zu sehen; manchmal muss ich häufig spulen.
      -> Dieses Problem ist auch unabhängig von dem installierten SKIN; ist latent vorhanden über Monate.
      -> Zudem tritt es bei normalen TV (alle Sender) nicht auf
      Aktuell verwende ich der SKIN: MY FLOW - bin begeistert. :]

      SOFTWARE/IMAGE:
      Newnigma2-daily 2020-05-02

      HARDWARE:

      SAT Tuner: via UNI cable;
      Tuner: UK124 DUR line
      Einstellung: UNICABLE 1&2 auf der DREAMBOX DM900


      Geräte Info


      [/td]
      [/tr]
      [tr]
      [td]
      Tuner
      Tuner A1:Si2169D (DVB-S2 / DVB-C / DVB-T2)
      Tuner A2:Si2169D (DVB-S2 / DVB-C / DVB-T2)

      [/td]
      [/tr]
      [tr]
      [td]
      (ST2000LM015-2E8174)
      Kapazität:2 TB
      Freier Platz:1443.376 GB

      [/td]
      [/tr]
      [tr]
      [td]
      (Intenso External USB 3.0)
      Kapazität:1 TB
      Freier Platz:98.764 GB

      [/td]
      [/tr]
      [/table]


      Ign feed.newnigma2.to ./ InReleaseHit feed.newnigma2.to ./ Release.gpgIgn feed.newnigma2.to ./ Release.gpgHit feed.newnigma2.to ./ ReleaseHit feed.newnigma2.to ./ ReleaseHit feed.newnigma2.to ./ ReleaseHit feed.newnigma2.to ./ ReleaseHit feed.newnigma2.to ./ ReleaseIgn feed.newnigma2.to ./ ReleaseIgn feed.newnigma2.to ./ Packages/DiffIndexHit feed.newnigma2.to ./ PackagesGet:1 feed.mediaportal.info ./ InRelease [20 B]Ign feed.mediaportal.info ./ InReleaseHit feed.newnigma2.to ./ PackagesGet:2 feed.mediaportal.info ./ Release.gpg [20 B]Ign feed.mediaportal.info ./ Release.gpgHit feed.newnigma2.to ./ PackagesIgn feed.newnigma2.to ./ Translation-enGet:3 feed.mediaportal.info ./ Release [20 B]Ign feed.mediaportal.info ./ ReleaseIgn feed.newnigma2.to ./ Translation-enIgn feed.newnigma2.to ./ Translation-enGet:4 feed.mediaportal.info ./ Packages/DiffIndex [20 B]Ign feed.mediaportal.info ./ Packages/DiffIndexIgn feed.newnigma2.to ./ Translation-enIgn feed.newnigma2.to ./ Translation-enIgn feed.newnigma2.to ./ Translation-enGet:5 feed.mediaportal.info ./ Translation-en [20 B]Get:6 feed.mediaportal.info ./ Packages [20 B]Get:7 feed.mediaportal.info ./ Translation-en [20 B]Get:8 feed.mediaportal.info ./ Packages [20 B]Get:9 feed.mediaportal.info ./ Translation-en [20 B]Hit feed.mediaportal.info ./ Packages [20 B]Get:10 feed.mediaportal.info ./ Translation-en [20 B]Ign feed.mediaportal.info ./ Translation-enReading package lists..DEVICES:
      [/td]
      [/tr]
      [/table]


      Fragen:
      a.) welche Parameter muss ich anpassen?
      b.) liegt es ggf. an der Autosicherung?
      c.) oder Hintergrund AutoSanner oder ~

      Danke im Voraus
      Siola
      :?:
      SILa
      :tongue:
    • Hi Joey,
      Danke für die schnelle Rückmeldung.
      • a.) Dateisystemcheck ohne Fehler, OK!
      • b.) Smart Check nachfolgend
      • root@dm900:~$ smartctl -a /dev/sda1 smartctl 6.4 2015-06-04 r4109 [armv7l-linux-3.14-1.17-dm900] (local build)Copyright (C) 2002-15, Bruce Allen, Christian Franke, smartmontools.org


        === START OF INFORMATION SECTION ===
        Device Model: ST2000LM015-2E8174
        Serial Number: WDZ3B4D0
        LU WWN Device Id: 5 000c50 0a8c9bdb1
        Firmware Version: SDM1
        User Capacity: 2.000.398.934.016 bytes [2,00 TB]
        Sector Sizes: 512 bytes logical, 4096 bytes physical
        Rotation Rate: 5400 rpm
        Form Factor: 2.5 inches
        Device is: Not in smartctl database [for details use: -P showall]
        ATA Version is: ACS-3 T13/2161-D revision 3b
        SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
        Local Time is: Mon May 4 19:43:12 2020 CEST
        SMART support is: Available - device has SMART capability.
        SMART support is: Enabled


        === START OF READ SMART DATA SECTION ===
        SMART overall-health self-assessment test result: PASSED


        General SMART Values:
        Offline data collection status: (0x00)Offline data collection activity
        was never started.
        Auto Offline Data Collection: Disabled.
        Self-test execution status: ( 23)The self-test routine was aborted by
        the host.
        Total time to complete Offline
        data collection: ( 0) seconds.
        Offline data collection
        capabilities: (0x71) SMART execute Offline immediate.
        No Auto Offline data collection support.
        Suspend Offline collection upon new
        command.
        No Offline surface scan supported.Self-test supported.
        Conveyance Self-test supported.
        Selective Self-test supported.
        SMART capabilities: (0x0003)Saves SMART data before entering
        power-saving mode.
        Supports SMART auto save timer.
        Error logging capability: (0x01)Error logging supported.
        General Purpose Logging supported.Short self-test routine
        recommended polling time: ( 1) minutes.
        Extended self-test routine
        recommended polling time: ( 335) minutes.
        Conveyance self-test routine
        recommended polling time: ( 2) minutes.
        SCT capabilities: (0x3035)SCT Status supported.
        SCT Feature Control supported.
        SCT Data Table supported.


        SMART Attributes Data Structure revision number: 10
        Vendor Specific SMART Attributes with Thresholds:
        ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
        1 Raw_Read_Error_Rate 0x000f 084 056 006 Pre-fail Always - 228364006
        3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0
        4 Start_Stop_Count 0x0032 094 094 020 Old_age Always - 6577
        5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 3
        7 Seek_Error_Rate 0x000f 074 060 045 Pre-fail Always - 8643737954
        9 Power_On_Hours 0x0032 084 084 000 Old_age Always - 14784 (40 29 0)
        10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
        12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1984
        184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
        187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
        188 Command_Timeout 0x0032 100 099 000 Old_age Always - 8590065666
        189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
        190 Airflow_Temperature_Cel 0x0022 062 048 040 Old_age Always - 38 (Min/Max 29/47)
        191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 12
        192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 305
        193 Load_Cycle_Count 0x0032 088 088 000 Old_age Always - 24099
        194 Temperature_Celsius 0x0022 038 052 000 Old_age Always - 38 (0 15 0 0 0)
        197 Current_Pending_Sector 0x0012 099 099 000 Old_age Always - 104
        198 Offline_Uncorrectable 0x0010 099 099 000 Old_age Offline - 104
        199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
        240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 1932 (147 214 0)
        241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 25286949087
        242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 5703307777
        254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0


        SMART Error Log Version: 1
        No Errors Logged


        SMART Self-test log structure revision number 1
        Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
        # 1 Short offline Aborted by host 70% 14784 -
        # 2 Extended offline Completed: read failure 90% 14783 92533184


        SMART Selective self-test log data structure revision number 1
        SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
        1 0 0 Not_testing
        2 0 0 Not_testing
        3 0 0 Not_testing
        4 0 0 Not_testing
        5 0 0 Not_testing
        Selective self-test flags (0x0):
        After scanning selected spans, do NOT read-scan remainder of disk.
        If Selective self-test is pending on power-up, resume after 0 minute delay

      • ? Würdest Du mir helfen bei der Auswertung von SMART... ?
      • Habe den HD Standby von 5 auf 120 min zwischen zeitlich erhöht!?
      • Danke SIOLA :winke:


      SILa
      :tongue:
    • was die Seagate S.M.A.R.T Werte 1 u. 7 betrifft kann man die RAW Werte bereinigt ausgeben lassen
      default sehen die Error Rate Values der Seagate Platte böse aus

      Source Code

      1. root@dm900:~# hdparm -I /dev/sda|grep Model
      2. Model Number: ST2000LM015-2E8174
      3. root@dm900:~# smartctl -a /dev/sda|grep "^ 1\|^ 7"
      4. 1 Raw_Read_Error_Rate 0x000f 084 064 006 Pre-fail Always - 233878556
      5. 7 Seek_Error_Rate 0x000f 067 060 045 Pre-fail Always - 4732402
      6. root@dm900:~#

      die raw Werte sehen dann gut aus - no errors
      Die Werte sind OK

      Source Code

      1. root@dm900:~# for value in 1 7;do smartctl -a -v $value,raw48:54 /dev/sda|grep "^ $value";done
      2. 1 Raw_Read_Error_Rate 0x000f 084 064 006 Pre-fail Always - 0
      3. 7 Seek_Error_Rate 0x000f 067 060 045 Pre-fail Always - 0
      4. root@dm900:~#
      Gruß Fred

      Die Dreambox ist tot, es lebe die Dreambox

      The post was edited 1 time, last by Fred Bogus Trumper ().