Hallo Zusammen,

habe ein Problem mit meiner DM900.
Fehler-Beschreibung:
Nach einer Aufnahme (via SAT) vom TV (tritt bei allen TV Sender auf) ruckelt die Aufnahme, beim Abspielen sporadisch derart,
dass der FILM ~ 1 sec stehen bleibt oder sogar 5-8 sec stockt, so dass ich spulen muss um an die nächste flüssige Stelle zu gelangen.
Eingrenzung des Problemes: ! Manchmal tritt es gar nicht auf; manchmal mehrmals im FILM - jedoch ist nur ein ruckeln zu sehen; manchmal muss ich häufig spulen.
-> Dieses Problem ist auch unabhängig von dem installierten SKIN; ist latent vorhanden über Monate.
-> Zudem tritt es bei normalen TV (alle Sender) nicht auf
Aktuell verwende ich der SKIN: MY FLOW - bin begeistert.

SOFTWARE/IMAGE:
Newnigma2-daily 2020-05-02

HARDWARE:

SAT Tuner: via UNI cable;
Tuner: UK124 DUR line
Einstellung: UNICABLE 1&2 auf der DREAMBOX DM900




[/td]
[/tr]
[tr]
[td]
[/td]
[/tr]
[tr]
[td]
[/td]
[/tr]
[tr]
[td]
[/td]
[/tr]
[/table]


Ign feed.newnigma2.to ./ InReleaseHit feed.newnigma2.to ./ Release.gpgIgn feed.newnigma2.to ./ Release.gpgHit feed.newnigma2.to ./ ReleaseHit feed.newnigma2.to ./ ReleaseHit feed.newnigma2.to ./ ReleaseHit feed.newnigma2.to ./ ReleaseHit feed.newnigma2.to ./ ReleaseIgn feed.newnigma2.to ./ ReleaseIgn feed.newnigma2.to ./ Packages/DiffIndexHit feed.newnigma2.to ./ PackagesGet:1 feed.mediaportal.info ./ InRelease [20 B]Ign feed.mediaportal.info ./ InReleaseHit feed.newnigma2.to ./ PackagesGet:2 feed.mediaportal.info ./ Release.gpg [20 B]Ign feed.mediaportal.info ./ Release.gpgHit feed.newnigma2.to ./ PackagesIgn feed.newnigma2.to ./ Translation-enGet:3 feed.mediaportal.info ./ Release [20 B]Ign feed.mediaportal.info ./ ReleaseIgn feed.newnigma2.to ./ Translation-enIgn feed.newnigma2.to ./ Translation-enGet:4 feed.mediaportal.info ./ Packages/DiffIndex [20 B]Ign feed.mediaportal.info ./ Packages/DiffIndexIgn feed.newnigma2.to ./ Translation-enIgn feed.newnigma2.to ./ Translation-enIgn feed.newnigma2.to ./ Translation-enGet:5 feed.mediaportal.info ./ Translation-en [20 B]Get:6 feed.mediaportal.info ./ Packages [20 B]Get:7 feed.mediaportal.info ./ Translation-en [20 B]Get:8 feed.mediaportal.info ./ Packages [20 B]Get:9 feed.mediaportal.info ./ Translation-en [20 B]Hit feed.mediaportal.info ./ Packages [20 B]Get:10 feed.mediaportal.info ./ Translation-en [20 B]Ign feed.mediaportal.info ./ Translation-enReading package lists..DEVICES:
[/td]
[/tr]
[/table]


Fragen:
a.) welche Parameter muss ich anpassen?
b.) liegt es ggf. an der Autosicherung?
c.) oder Hintergrund AutoSanner oder ~

Danke im Voraus
Siola

Hi Joey,
Danke für die schnelle Rückmeldung.

• a.) Dateisystemcheck ohne Fehler, OK!
  
• b.) Smart Check nachfolgend
  
• root@dm900:~$ smartctl -a /dev/sda1 smartctl 6.4 2015-06-04 r4109 [armv7l-linux-3.14-1.17-dm900] (local build)Copyright (C) 2002-15, Bruce Allen, Christian Franke, smartmontools.org
  
  
  === START OF INFORMATION SECTION ===
  Device Model: ST2000LM015-2E8174
  Serial Number: WDZ3B4D0
  LU WWN Device Id: 5 000c50 0a8c9bdb1
  Firmware Version: SDM1
  User Capacity: 2.000.398.934.016 bytes [2,00 TB]
  Sector Sizes: 512 bytes logical, 4096 bytes physical
  Rotation Rate: 5400 rpm
  Form Factor: 2.5 inches
  Device is: Not in smartctl database [for details use: -P showall]
  ATA Version is: ACS-3 T13/2161-D revision 3b
  SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  Local Time is: Mon May 4 19:43:12 2020 CEST
  SMART support is: Available - device has SMART capability.
  SMART support is: Enabled
  
  
  === START OF READ SMART DATA SECTION ===
  SMART overall-health self-assessment test result: PASSED
  
  
  General SMART Values:
  Offline data collection status: (0x00)Offline data collection activity
  was never started.
  Auto Offline Data Collection: Disabled.
  Self-test execution status: ( 23)The self-test routine was aborted by
  the host.
  Total time to complete Offline
  data collection: ( 0) seconds.
  Offline data collection
  capabilities: (0x71) SMART execute Offline immediate.
  No Auto Offline data collection support.
  Suspend Offline collection upon new
  command.
  No Offline surface scan supported.Self-test supported.
  Conveyance Self-test supported.
  Selective Self-test supported.
  SMART capabilities: (0x0003)Saves SMART data before entering
  power-saving mode.
  Supports SMART auto save timer.
  Error logging capability: (0x01)Error logging supported.
  General Purpose Logging supported.Short self-test routine
  recommended polling time: ( 1) minutes.
  Extended self-test routine
  recommended polling time: ( 335) minutes.
  Conveyance self-test routine
  recommended polling time: ( 2) minutes.
  SCT capabilities: (0x3035)SCT Status supported.
  SCT Feature Control supported.
  SCT Data Table supported.
  
  
  SMART Attributes Data Structure revision number: 10
  Vendor Specific SMART Attributes with Thresholds:
  ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate 0x000f 084 056 006 Pre-fail Always - 228364006
  3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0
  4 Start_Stop_Count 0x0032 094 094 020 Old_age Always - 6577
  5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 3
  7 Seek_Error_Rate 0x000f 074 060 045 Pre-fail Always - 8643737954
  9 Power_On_Hours 0x0032 084 084 000 Old_age Always - 14784 (40 29 0)
  10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1984
  184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  188 Command_Timeout 0x0032 100 099 000 Old_age Always - 8590065666
  189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  190 Airflow_Temperature_Cel 0x0022 062 048 040 Old_age Always - 38 (Min/Max 29/47)
  191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 12
  192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 305
  193 Load_Cycle_Count 0x0032 088 088 000 Old_age Always - 24099
  194 Temperature_Celsius 0x0022 038 052 000 Old_age Always - 38 (0 15 0 0 0)
  197 Current_Pending_Sector 0x0012 099 099 000 Old_age Always - 104
  198 Offline_Uncorrectable 0x0010 099 099 000 Old_age Offline - 104
  199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 1932 (147 214 0)
  241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 25286949087
  242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 5703307777
  254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
  
  
  SMART Error Log Version: 1
  No Errors Logged
  
  
  SMART Self-test log structure revision number 1
  Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  # 1 Short offline Aborted by host 70% 14784 -
  # 2 Extended offline Completed: read failure 90% 14783 92533184
  
  
  SMART Selective self-test log data structure revision number 1
  SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  1 0 0 Not_testing
  2 0 0 Not_testing
  3 0 0 Not_testing
  4 0 0 Not_testing
  5 0 0 Not_testing
  Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
  If Selective self-test is pending on power-up, resume after 0 minute delay
  
  
• ? Würdest Du mir helfen bei der Auswertung von SMART... ?
  
• Habe den HD Standby von 5 auf 120 min zwischen zeitlich erhöht!?
  
• Danke SIOLA
  
•