Hello>Iam using my original polsat card in dm800 with newenigma2 image with cccam/sbox and nearly everything is fine card is decrypted and I can see this in cccam info but after few hours polsat channels going from net not from my card dont know why,on cccam info card is online.
configs:
on cccam cfg
N: 127.0.0.1 5555 polsat polsat 01 02 03 04 05 06 07 08 09 10 11 12 13 14
sbox conf
[main]
server_only=1 # 0=emu+newcamd server 1=only newcamd server
log=1 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
userspath=/var/bin/users.sbox # users list
webinterface=1 # 1=web interface on 0=web interface off
webport=81 # web interface port
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/sci0 # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=5555 # newcamd port
mhz=357 # Mhz for card in this reader, ONLY WORKS ON INTERNAL CARDREADER. Example: mhz=357, mhz=368
reader=1 # 0=phoenix, 1=sci (internal reader), 2=smartreader
[slot1]
active=0 # 0=inactive 1=active
sci=/dev/sci1 # upper
ncdserver=0 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=34000 # newcamd port
mhz=0 # Mhz for card in this reader, ONLY WORKS ON INTERNAL CARDREADER. Example: mhz=357, mhz=368
#Nagra2/3 Example
[2BE81DC5] # nagra2 camid (4 bytes) xxxxxCAM IDent : UA: debug gbox, lub Oscam: SER:
rsa=my rsa here
boxkey=my bk here
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath=/var/keys/port.list # path from port.list
users sbox
[slot0] # slot to connect
user=polsat # user
pass=polsat # password
au=1 # au on/off
and all running fine until few hours channels are not decrypted from my card but from net
So Iam trying to change to cccam/oscam and here again all is fine card is decrypted but after few hours oscam hardly killing cpu in dm800 the cpu usage when I put command top on telnet is about 70% for oscam and that freezing dreambox.
That was yesterday when I tryed newest versions of oscam,today morning change to 4842 downloaded from newenigma panel and will what happens 8)For inow is ok.
But can someone explain me why sbox stoping decrypt channels from card?
regards.
configs:
on cccam cfg
N: 127.0.0.1 5555 polsat polsat 01 02 03 04 05 06 07 08 09 10 11 12 13 14
sbox conf
[main]
server_only=1 # 0=emu+newcamd server 1=only newcamd server
log=1 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
userspath=/var/bin/users.sbox # users list
webinterface=1 # 1=web interface on 0=web interface off
webport=81 # web interface port
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/sci0 # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=5555 # newcamd port
mhz=357 # Mhz for card in this reader, ONLY WORKS ON INTERNAL CARDREADER. Example: mhz=357, mhz=368
reader=1 # 0=phoenix, 1=sci (internal reader), 2=smartreader
[slot1]
active=0 # 0=inactive 1=active
sci=/dev/sci1 # upper
ncdserver=0 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=34000 # newcamd port
mhz=0 # Mhz for card in this reader, ONLY WORKS ON INTERNAL CARDREADER. Example: mhz=357, mhz=368
#Nagra2/3 Example
[2BE81DC5] # nagra2 camid (4 bytes) xxxxxCAM IDent : UA: debug gbox, lub Oscam: SER:
rsa=my rsa here
boxkey=my bk here
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath=/var/keys/port.list # path from port.list
users sbox
[slot0] # slot to connect
user=polsat # user
pass=polsat # password
au=1 # au on/off
and all running fine until few hours channels are not decrypted from my card but from net
So Iam trying to change to cccam/oscam and here again all is fine card is decrypted but after few hours oscam hardly killing cpu in dm800 the cpu usage when I put command top on telnet is about 70% for oscam and that freezing dreambox.
That was yesterday when I tryed newest versions of oscam,today morning change to 4842 downloaded from newenigma panel and will what happens 8)For inow is ok.
But can someone explain me why sbox stoping decrypt channels from card?
regards.