Halllo
ich habe dreambox 800 HD Orginal , instaliert ist newenigma2 - 3.2.2 update gestern gemacht
Festplatte 1GB Hitachi - ist schon4 Jahre alt und macht irgendwie Probleme
1 bei Aufnahmen bricht die manchmal Aufnahmen ab und sehe ich die Räder
das wars Hardreset hift nur

2 also habe ich die platt gemacht . neu initialisiert in "Menue" alles oki bisdahin
dann aber schrieb ich das in telnet

-------------------------------------------------------------------------------------
root@dm800:~# fsck.ext3 /dev/sda1
e2fsck 1.41.9 (22-Aug-2009)
/dev/sda1 is mounted.

WARNING!!! Running e2fsck on a mounted filesystem may cause
SEVERE filesystem damage.

Do you really want to continue (y/n)? yes

/dev/sda1: recovering journal
Error reading block 32768 (Attempt to read block from filesystem resulted in sho rt read). Ignore error<y>? yes

Force rewrite<y>? yes


Segmentation fault

-----------------------------------------------------------


ist die kapput ?
was kann ich noch machen

Danke euch

hi

danke für Antwort
na ja


----------------------------------------------------
root@dm800:~# smartctl -a /dev/sda1
smartctl version 5.38 [mipsel-oe-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is smartmontools.sourceforge.net/

Smartctl open device: /dev/sda1 failed: No such file or directory

-------------------------
das heisst ich melde mich wenn ich hinkrige dass HD an Box hängt

( ich habe kein zusätzlicher USB hub oder sowas
und newenigma 3.2.2 ist im Flash
auch kein BA oder USB
system gerade neu eingerichtet

root@dm800:~# smartctl -a /dev/sda
smartctl version 5.38 [mipsel-oe-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family: Hitachi Ultrastar 7K1000
Device Model: Hitachi HUA721010KLA330
Serial Number: GTA000PAG3PE1A
Firmware Version: GKAOA70M
User Capacity: 1,000,204,886,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 1
Local Time is: Tue Oct 25 17:14:26 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (15354) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off supp ort.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 054 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 114 114 024 Pre-fail Always - 667 (Average 551)
4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 7312
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 119 119 020 Pre-fail Offline - 39
9 Power_On_Hours 0x0012 097 097 000 Old_age Always - 23635
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 312
192 Power-Off_Retract_Count 0x0032 094 094 000 Old_age Always - 7519
193 Load_Cycle_Count 0x0012 094 094 000 Old_age Always - 7519
194 Temperature_Celsius 0x0002 125 125 000 Old_age Always - 48 (Lifetime Min/Max 16/72)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 573334

SMART Error Log Version: 1
ATA Error Count: 444 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 444 occurred at disk power-on lifetime: 23635 hours (984 days + 19 hours)
When the command that caused the error occurred, the device was active or idle .

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 5f 20 1c e0 Error: ABRT at LBA = 0x001c205f = 1843295

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
30 00 40 20 20 1c e0 08 00:00:30.100 WRITE SECTOR(S)
30 00 40 18 00 18 e0 08 00:00:30.100 WRITE SECTOR(S)
ec 03 08 00 00 00 a0 08 00:00:30.100 IDENTIFY DEVICE
ef 03 08 00 00 00 a0 08 00:00:30.100 SET FEATURES [Set transfer mode]
ec 00 01 01 00 00 a0 08 00:00:30.100 IDENTIFY DEVICE

Error 443 occurred at disk power-on lifetime: 23635 hours (984 days + 19 hours)
When the command that caused the error occurred, the device was active or idle .

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 3b 25 20 1c e0 Error: ABRT at LBA = 0x001c2025 = 1843237

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
30 00 40 20 20 1c e0 08 00:00:30.100 WRITE SECTOR(S)
30 00 40 18 00 18 e0 08 00:00:30.100 WRITE SECTOR(S)
ec 03 08 00 00 00 a0 08 00:00:30.100 IDENTIFY DEVICE
ef 03 08 00 00 00 a0 08 00:00:30.100 SET FEATURES [Set transfer mode]
ec 00 01 01 00 00 a0 08 00:00:30.100 IDENTIFY DEVICE

Error 442 occurred at disk power-on lifetime: 23635 hours (984 days + 19 hours)
When the command that caused the error occurred, the device was active or idle .

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 3e 21 20 14 e0 Error: ABRT at LBA = 0x00142021 = 1318945

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
30 00 40 20 20 14 e0 08 00:00:29.600 WRITE SECTOR(S)
ec 03 08 00 00 00 a0 08 00:00:29.600 IDENTIFY DEVICE
ef 03 08 00 00 00 a0 08 00:00:29.600 SET FEATURES [Set transfer mode]
ec 00 01 01 00 00 a0 08 00:00:29.600 IDENTIFY DEVICE
30 00 3d 22 20 14 e0 04 00:00:29.500 WRITE SECTOR(S)

Error 441 occurred at disk power-on lifetime: 23635 hours (984 days + 19 hours)
When the command that caused the error occurred, the device was active or idle .

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 3d 22 20 14 e0 Error: ABRT at LBA = 0x00142022 = 1318946

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
30 00 40 20 20 14 e0 08 00:00:29.200 WRITE SECTOR(S)
ec 03 08 00 00 00 a0 08 00:00:29.200 IDENTIFY DEVICE
ef 03 08 00 00 00 a0 08 00:00:29.200 SET FEATURES [Set transfer mode]
ec 00 01 01 00 00 a0 08 00:00:29.200 IDENTIFY DEVICE
30 00 3d 23 20 14 e0 04 00:00:29.000 WRITE SECTOR(S)

Error 440 occurred at disk power-on lifetime: 23635 hours (984 days + 19 hours)
When the command that caused the error occurred, the device was active or idle .

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 3d 23 20 14 e0 Error: ABRT at LBA = 0x00142023 = 1318947

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
30 00 40 20 20 14 e0 08 00:00:28.700 WRITE SECTOR(S)
ec 03 08 00 00 00 a0 08 00:00:28.700 IDENTIFY DEVICE
ef 03 08 00 00 00 a0 08 00:00:28.700 SET FEATURES [Set transfer mode]
ec 00 01 01 00 00 a0 08 00:00:28.700 IDENTIFY DEVICE
30 00 3a 26 20 14 e0 04 00:00:28.600 WRITE SECTOR(S)

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

----------------------------------------

bitte um Hilfe was kann ich noch testen ob die Platte noch oki ist ?

oki danke
ich suche zuerst nach wackelkontakt
kabel matherboard usw
ich schreibe hier gleich weiter

1 -- esata Platte an PC eingebaut --- keine Probs

2 -- dreambox aufgemacht Anschlüsse sauber gemacht sata raus rein

3 --- 3 verschiedene kabel sata probiert immer zirkus mit ext HD !!


4 .....ENDSTAND

ich glaube es ist Anschluss ! dies kleine esata rote zu matherboard macht Probs !! wenn ich Kabel dadrin bewege schaltet sich Platte aus und ein !!!!! hmmmm oder Probs von MAtherboard kann auch sein


5 jetzt habe ich es per USB verbunden ich teste ob alles oki nach 2 Stunden Aufnahme
6 Stunden vorbei alles bestens !!

Danke für deine Hilfe ich melde mich später