meine esata will nicht mehr bekomme über telnet diese ausgabe
root@dm800se:~# mount /media/hdd2
mount: mounting /dev/disk/by-uuid/974cd537-b8b7-431c-bfd6-01f0922511e5 on /media/hdd2 failed: Invalid argument

bitte um hilfe danke euch

root@dm800se:~# cat /etc/fstab
rootfs / auto defaults 1 1
proc /proc proc defaults 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
usbfs /proc/bus/usb usbfs defaults 0 0
/dev/mtdblock2 /boot jffs2 ro 0 0
tmpfs /var tmpfs defaults 0 0
tmpfs /tmp tmpfs defaults 0 0
/dev/disk/by-uuid/0f422d4d-a85c-4d99-8da7-e3ca12cefe38 /media/hdd auto defaults 0 0
/dev/disk/by-uuid/974cd537-b8b7-431c-bfd6-01f0922511e5 /media/hdd2 auto defaults 0 0



root@dm800se:~# fdisk -l

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x35b22ac9

Device Boot Start End Blocks Id System
/dev/sda1 1 60801 488384032 83 Linux

Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xf1884cb0

Device Boot Start End Blocks Id System
/dev/sdb1 1 243201 1953512032 83 Linux

Disk /dev/sdc: 4211 MB, 4211081216 bytes
2 heads, 63 sectors/track, 65275 cylinders
Units = cylinders of 126 * 512 = 64512 bytes
Disk identifier: 0x00473e96

Device Boot Start End Blocks Id System
/dev/sdc1 * 1 65276 4112352 b W95 FAT32




bitte schön

root@dm800se:~# blkid
/dev/sda1: UUID="0f422d4d-a85c-4d99-8da7-e3ca12cefe38" TYPE="ext3"
/dev/sdb1: UUID="974cd537-b8b7-431c-bfd6-01f0922511e5" SEC_TYPE="ext2" TYPE="ext3"
/dev/sdc1: UUID="4372c9a0-766d-4aa7-8600-5b5d53ab8345" TYPE="ext3"


root@dm800se:~# ls -la /media/
drwxr-xr-x 14 root root 0 Apr 3 14:26 .
drwxr-xr-x 18 root root 0 Jan 1 1970 ..
drwxr-xr-x 2 root root 0 Jan 1 1970 card
drwxr-xr-x 2 root root 0 Jan 1 1970 cf
drwxr-xr-x 2 root root 0 Jan 1 1970 dev
drwxr-xr-x 26 1000 users 4096 Apr 5 20:52 hdd
drwxr-xr-x 2 root root 0 Jan 1 1970 hdd-int
drwxr-xr-x 2 root root 0 Apr 3 14:26 hdd2
drwxr-xr-x 2 root root 0 Jan 1 1970 mmc1
drwxr-xr-x 3 root root 0 Apr 3 15:06 net
drwxr-xr-x 3 root root 0 Jan 1 1970 ram
drwxr-xr-x 2 root root 0 Jan 1 1970 realroot
drwxr-xr-x 2 root root 0 Jan 1 1970 union
drwxr-xr-x 3 root root 0 Jan 1 1970 usb

ja habe ich das kabel ist ok

rootfs on / type rootfs (rw)
/dev/root on / type jffs2 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
none on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw)
usbfs on /proc/bus/usb type usbfs (rw)
/dev/mtdblock2 on /boot type jffs2 (ro)
tmpfs on /var type tmpfs (rw)
tmpfs on /tmp type tmpfs (rw)
/dev/disk/by-uuid/0f422d4d-a85c-4d99-8da7-e3ca12cefe38 on /media/hdd type ext3 (rw,data=ordered)
/dev/sdc1 on /autofs/4372c9a0-766d-4aa7-8600-5b5d53ab8345 type ext3 (rw,data=ordered)

die platte wird nicht gemaountet das is auch komisch

root@dm800se:~# mount /dev/sdb1 /media/hdd2
mount: mounting /dev/sdb1 on /media/hdd2 failed: Invalid argument

4294723.885000] set current avs auto aspect to 16:9
[4294723.886000] disable wss on display 0
[4294723.886000] set wss 7 on display 1
[4294723.887000] set sb to 3(1)
[4294723.892000] set current avs auto aspect to 16:9
[4294723.892000] disable wss on display 0
[4294723.893000] set wss 7 on display 1
[4294723.893000] set sb to 3(1)
[4294723.895000] set current avs auto aspect to 16:9

[4294667.436000] serial8250: ttyS0 at MMIO 0x0 (irq = 22) is a 16550A
[4294667.437000] serial8250: ttyS1 at MMIO 0x0 (irq = 67) is a 16550A
[4294667.438000] brcm-pm: enabling power to ENET block
[4294667.438000] Broadcom BCM7413 P21 Ethernet Network Device v2.0 May 2 2011 06:05:18
[4294667.444000] Config Internal PHY Through MDIO: 100 MB Full-Duplex (auto-neg)
[4294669.082000] libata version 2.00 loaded.
[4294669.082000] brcm-pm: enabling power to SATA block
[4294669.082000] sata_svw 0000:01:00.0: version 4.0
[4294669.099000] ata1: SATA max UDMA/133 cmd 0xB0510100 ctl 0xB0510120 bmdma 0xB0510130 irq 42
[4294669.101000] ata2: SATA max UDMA/133 cmd 0xB0510000 ctl 0xB0510020 bmdma 0xB0510030 irq 42
[4294669.102000] scsi0 : sata_svw
[4294669.409000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl F0000)
[4294669.415000] ata1.00: ATA-8, max UDMA7, 976773168 sectors: LBA48 NCQ (depth 0/32)
[4294669.421000] ata1.00: configured for UDMA/133
[4294669.421000] scsi1 : sata_svw
[4294671.718000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl F0000)
[4294671.731000] ata2.00: ATA-6, max UDMA/133, 3907029168 sectors: LBA48 NCQ (depth 0/32)
[4294671.732000] ata2.00: ata2: dev 0 multi count 0
[4294671.745000] ata2.00: configured for UDMA/133
[4294671.746000] Vendor: ATA Model: SAMSUNG HM500LI Rev: 2TF0
[4294671.747000] Type: Direct-Access ANSI SCSI revision: 05
[4294671.748000] SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
[4294671.749000] sda: Write Protect is off
[4294671.750000] sda: Mode Sense: 00 3a 00 00
[4294671.750000] SCSI device sda: drive cache: write back
[4294671.751000] SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
[4294671.751000] sda: Write Protect is off
[4294671.752000] sda: Mode Sense: 00 3a 00 00
[4294671.752000] SCSI device sda: drive cache: write back