Feedback/Bugs in unstable images DM8000/DM7020HD/DM800se/DM800/DM500HD OE2.0

danke für die schnelle Antwort

ja das stimmt. Nach dem neu flashen der Box habe ich erstmal freeze installiert und den USB von der Dreambox dafür benutzt.

wenn ich jetzt über telnet dmesg eingebe kommt folgendes:

] DVB: registering new adapter (BCM7400)
[ 18.848000] autodetecting NIMs...
[ 18.851000] ret: -145, feid: 00
[ 18.858000] ret: -145, feid: 00
[ 18.858000] Initializing adapter 0 (BCM4501 (internal)-DVB-S2)
[ 18.859000] fe_common: retrying i2c transfer
[ 18.860000] fe_common: retrying i2c transfer
[ 18.864000] fe_common: retrying i2c transfer
[ 18.864000] fe_common: retrying i2c transfer
[ 18.864000] fe_common: retrying i2c transfer
[ 18.864000] fe_common: retrying i2c transfer
[ 18.864000] fe_common: retrying i2c transfer
[ 18.864000] fe_common: retrying i2c transfer
[ 18.864000] fe_common: retrying i2c transfer
[ 18.865000] fe_common: retrying i2c transfer
[ 18.865000] fe: write ret=-145
[ 18.865000] bcm4501: mbox read error
[ 18.865000] attach bcm4501 failed.. try now bcm4506
[ 18.867000] bcm4506: found 4506, revision 0(a1)
[ 18.867000] bcm4506: bcm_initAP
[ 18.875000] bcm4506: upload & start firmware
[ 18.949000] enable tsm0
[ 21.002000] bcm4506: bcm4506: ap not running - start now
[ 21.099000] bcm4506: uCode 0x61
[ 21.116000] bcm4506: no bcm3445 detected
[ 21.128000] DVB: registering adapter 0 frontend 0 (bcm4506)...
[ 21.171000] Initializing adapter 1 (BCM4506 (internal)-DVB-S2)
[ 21.180000] bcm4506: no bcm3445 detected
[ 21.192000] DVB: registering adapter 0 frontend 1 (bcm4506)...
[ 22.070000] VIDEO0: stop decode
[ 22.070000] no decoder left in sync handling so disable xpt_sync
[ 22.075000] CI stopped...
[ 22.075000] CI stopped...
[ 22.075000] CI stopped...
[ 22.082000] registered vtuner misc/vtuner0, minor 49
[ 22.082000] registered vtuner misc/vtuner1, minor 48
[ 22.082000] IR-TX init!
[ 22.135000] CI stopped...
[ 22.283000] VIDEO0: set blank to 0
[ 22.283000] sync is off so we enable it
[ 22.283000] playback!
[ 22.283000] total video delay: 0 (0 ms)
[ 22.285000] VIDEO0: start decode
[ 22.285000] flush video decoder
[ 22.319000] VIDEO0: first pts 0x0
[ 22.319000] VIDEO0: framerate changed 3
[ 22.319000] VIDEO0: resolution changed (1280 720)
[ 22.319000] VIDEO0: aspect changed 3
[ 22.439000] set current avs auto aspect to 16:9
[ 22.439000] disable wss on display 0
[ 22.439000] disable wss on display 1
[ 22.439000] set current avs auto aspect to 16:9
[ 22.439000] disable wss on display 0
[ 22.439000] disable wss on display 1
[ 22.439000] set sb to 3(1)
[ 22.439000] Write AVS:VIDEO0: set blank to 0
[ 22.440000] 40VIDEO0: stop decode
[ 22.440000] 40VIDEO0: set blank to 0
[ 22.440000] no decoder left in sync handling so disable xpt_sync
[ 22.441000] 00 00 00 00 18 61 00 02 00 00 00 ff
[ 25.578000] input: dreambox remote control (native) as /devices/virtual/input/input1
[ 25.580000] input: dreambox advanced remote control (native) as /devices/virtual/input/input2
[ 25.596000] input: dreambox ir keyboard as /devices/virtual/input/input3
[ 25.608000] input: dreambox ir mouse as /devices/virtual/input/input4
[ 25.623000] 4020590 ms:
[ 25.720000] unionfs: remount ignoring option "dirs"
[ 25.745000] 122 ms: 12
[ 25.937000] Empty flash at 0x00328628 ends at 0x00328800
[ 26.072000] 327 ms: 14
[ 27.107000] 1035 ms: 16
[ 27.201000] 94 ms: 18
[ 27.233000] 32 ms: 20
[ 28.850000] 1617 ms: 22
[ 29.198000] 348 ms: 24
[ 34.318000] sd 2:0:0:0: [sdb] Unhandled sense code
[ 34.318000] sd 2:0:0:0: [sdb] Result: hostbyte=0x10 driverbyte=0x08
[ 34.318000] sd 2:0:0:0: [sdb] Sense Key : 0x7 [current]
[ 34.318000] Info fld=0x0
[ 34.318000] sd 2:0:0:0: [sdb] ASC=0x27 ASCQ=0x0
[ 34.318000] sd 2:0:0:0: [sdb] CDB: cdb[0]=0x2a: 2a 00 00 18 0f f0 00 00 08 00
[ 34.318000] end_request: critical target error, dev sdb, sector 1576944
[ 34.319000] Buffer I/O error on device sdb1, logical block 197117
[ 34.319000] lost page write due to I/O error on sdb1
[ 35.174000] EXT4-fs error (device loop2): ext4_journal_start_sb:327: Detected aborted journal
[ 35.174000] EXT4-fs (loop2): Remounting filesystem read-only
[ 35.276000] 6078 ms: 26
[ 35.349000] 73 ms: 28
[ 35.407000] 58 ms: 30
[ 36.373000] 966 ms: 33
[ 36.491000] 118 ms: 34
[ 38.380000] 1889 ms: 35
[ 38.510000] 130 ms: 36
[ 38.596000] 86 ms: 38
[ 38.727000] 131 ms: 39
[ 38.876000] 148 ms: 40
[ 39.132000] 256 ms: 41
[ 39.759000] 627 ms: 43
[ 39.825000] 66 ms: 44
[ 39.895000] 70 ms: 45
[ 41.059000] 1164 ms: 46
[ 41.081000] 22 ms: 48
[ 41.171000] VIDEO0: set blank to 0
[ 41.171000] sync is off so we enable it
[ 41.171000] playback!
[ 41.172000] total video delay: 0 (0 ms)
[ 41.173000] VIDEO0: start decode
[ 41.174000] flush video decoder
[ 41.219000] VIDEO0: first pts 0x0
[ 41.334000] VIDEO0: set blank to 0
[ 41.335000] VIDEO0: stop decode
[ 41.335000] VIDEO0: set blank to 0
[ 41.335000] no decoder left in sync handling so disable xpt_sync
[ 51.044000] prune_queue: c=3cbcec61
[ 57.161000] bcmfb: enable manual blit
[ 57.193000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
[ 57.350000] tsmux set cisource reg 00 to val 54
[ 57.352000] tsmux set cisource reg 00 to val 44
[ 57.352000] tsmux set cisource reg 01 to val 54
[ 57.354000] tsmux set cisource reg 01 to val 44
[ 57.355000] tsmux set tsports reg 02 to val dc
[ 57.356000] tsmux set tsports reg 02 to val dc
[ 57.358000] tsmux set tsports reg 03 to val fe
[ 57.360000] tsmux set tsports reg 03 to val fe
[ 58.190000] bcm4506: channel 0 is in normale mode now
[ 58.206000] bcm4506: channel 1 is in normale mode now
[ 58.210000] bcm4506: channel 0 is sleeping now
[ 58.230000] bcm4506: channel 1 is sleeping now
[ 60.845000] kjournald starting. Commit interval 5 seconds
[ 60.862000] EXT3-fs (sda1): using internal journal
[ 60.862000] EXT3-fs (sda1): mounted filesystem with writeback data mode
[ 61.825000] cdfs 2.6.27 loaded.
[ 62.194000] fuse init (API version 7.17)
[ 62.651000] UDF-fs: warning (device sdb): udf_fill_super: No partition found (1)
[ 62.766000] ioctl(CDROMREADTOCHDR) failed
[ 62.766000] cdfs_toc_read failed
[ 62.977000] UDF-fs: warning (device sdb): udf_fill_super: No partition found (1)
[ 63.141000] ioctl(CDROMREADTOCHDR) failed
[ 63.141000] cdfs_toc_read failed
[ 63.192000] sd 2:0:0:0: [sdb] Unhandled sense code
[ 63.192000] sd 2:0:0:0: [sdb] Result: hostbyte=0x10 driverbyte=0x08
[ 63.192000] sd 2:0:0:0: [sdb] Sense Key : 0x7 [current]
[ 63.192000] Info fld=0x0
[ 63.192000] sd 2:0:0:0: [sdb] ASC=0x27 ASCQ=0x0
[ 63.192000] sd 2:0:0:0: [sdb] CDB: cdb[0]=0x2a: 2a 00 00 00 00 08 00 00 08 00
[ 63.192000] end_request: critical target error, dev sdb, sector 8
[ 63.192000] Buffer I/O error on device sdb1, logical block 0
[ 63.192000] lost page write due to I/O error on sdb1
[ 63.334000] kjournald starting. Commit interval 5 seconds
[ 63.335000] sd 2:0:0:0: [sdb] Unhandled sense code
[ 63.336000] sd 2:0:0:0: [sdb] Result: hostbyte=0x10 driverbyte=0x08
[ 63.336000] sd 2:0:0:0: [sdb] Sense Key : 0x7 [current]
[ 63.336000] Info fld=0x0
[ 63.336000] sd 2:0:0:0: [sdb] ASC=0x27 ASCQ=0x0
[ 63.336000] sd 2:0:0:0: [sdb] CDB: cdb[0]=0x2a: 2a 00 00 00 00 08 00 00 08 00
[ 63.336000] end_request: critical target error, dev sdb, sector 8
[ 63.336000] Buffer I/O error on device sdb1, logical block 0
[ 63.336000] lost page write due to I/O error on sdb1
[ 63.336000] EXT3-fs (sdb1): I/O error while writing superblock
[ 63.336000] EXT3-fs (sdb1): using internal journal
[ 63.336000] EXT3-fs (sdb1): recovery complete
[ 63.336000] EXT3-fs (sdb1): mounted filesystem with writeback data mode
[ 68.721000] sd 2:0:0:0: [sdb] Unhandled sense code
[ 68.721000] sd 2:0:0:0: [sdb] Result: hostbyte=0x10 driverbyte=0x08
[ 68.721000] sd 2:0:0:0: [sdb] Sense Key : 0x7 [current]
[ 68.721000] Info fld=0x0
[ 68.721000] sd 2:0:0:0: [sdb] ASC=0x27 ASCQ=0x0
[ 68.721000] sd 2:0:0:0: [sdb] CDB: cdb[0]=0x2a: 2a 00 00 18 0f f0 00 00 08 00
[ 68.721000] end_request: critical target error, dev sdb, sector 1576944
[ 68.721000] Buffer I/O error on device sdb1, logical block 197117
[ 68.722000] lost page write due to I/O error on sdb1
[ 68.722000] JBD: I/O error detected when updating journal superblock for sdb1.
[ 68.723000] sd 2:0:0:0: [sdb] Unhandled sense code
[ 68.723000] sd 2:0:0:0: [sdb] Result: hostbyte=0x10 driverbyte=0x08
[ 68.723000] sd 2:0:0:0: [sdb] Sense Key : 0x7 [current]
[ 68.723000] Info fld=0x0
[ 68.723000] sd 2:0:0:0: [sdb] ASC=0x27 ASCQ=0x0
[ 68.723000] sd 2:0:0:0: [sdb] CDB: cdb[0]=0x2a: 2a 00 00 18 0f f8 00 00 10 00
[ 68.723000] end_request: critical target error, dev sdb, sector 1576952
[ 68.724000] Aborting journal on device sdb1.
[ 68.725000] sd 2:0:0:0: [sdb] Unhandled sense code
[ 68.725000] sd 2:0:0:0: [sdb] Result: hostbyte=0x10 driverbyte=0x08
[ 68.725000] sd 2:0:0:0: [sdb] Sense Key : 0x7 [current]
[ 68.725000] Info fld=0x0
[ 68.725000] sd 2:0:0:0: [sdb] ASC=0x27 ASCQ=0x0
[ 68.725000] sd 2:0:0:0: [sdb] CDB: cdb[0]=0x2a: 2a 00 00 18 0f f0 00 00 08 00
[ 68.725000] end_request: critical target error, dev sdb, sector 1576944
[ 68.725000] Buffer I/O error on device sdb1, logical block 197117
[ 68.725000] lost page write due to I/O error on sdb1
[ 68.726000] JBD: I/O error detected when updating journal superblock for sdb1.
[ 70.290000] EXT3-fs (sdb1): error: ext3_put_super: Couldn't clean up the journal
[ 70.290000] EXT3-fs (sdb1): error: remounting filesystem read-only
[ 78.539000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
[ 79.402000] Write AVS: 40 40 00 00 00 00 00 61 00 02 00 00 00 ff
[ 79.461000] set current avs auto aspect to 4:3
[ 79.461000] disable wss on display 0
[ 79.461000] disable wss on display 1
[ 79.461000] set sb to 3(2)
[ 79.461000] Write AVS: 40 40 00 00 00 00 00 63 00 02 00 00 00 ff
[ 79.559000] set current avs auto aspect to 4:3
[ 79.559000] disable wss on display 0
[ 79.559000] disable wss on display 1
[ 79.559000] set sb to 3(2)
[ 79.564000] disable wss on display 0
[ 79.564000] set wss 8 on display 1
[ 79.600000] set input to 0
[ 79.600000] set fb to 2(0)
[ 79.600000] set current avs auto aspect to 4:3
[ 79.601000] disable wss on display 0
[ 79.601000] set wss 8 on display 1
[ 79.601000] set sb to 3(2)
[ 79.605000] set ac3 to downmix
[ 86.339000] set current avs auto aspect to 16:9
[ 86.339000] disable wss on display 0
[ 86.339000] set wss 7 on display 1
[ 86.341000] set sb to 3(1)
[ 86.341000] Write AVS: 40 40 00 00 00 00 00 61 00 02 00 00 00 ff
[ 86.379000] set current avs auto aspect to 16:9
[ 86.379000] disable wss on display 0
[ 86.379000] set wss 7 on display 1
[ 86.380000] disable wss on display 0
[ 86.380000] set wss 7 on display 1
[ 86.381000] set sb to 3(1)
[ 86.382000] set current avs auto aspect to 16:9
[ 86.382000] disable wss on display 0
[ 86.382000] set wss 7 on display 1
[ 86.382000] set sb to 3(1)
[ 86.389000] set current avs auto aspect to 16:9
[ 86.389000] disable wss on display 0
[ 86.389000] set wss 7 on display 1
[ 86.389000] set sb to 3(1)
[ 86.391000] set current avs auto aspect to 16:9
[ 86.391000] disable wss on display 0
[ 86.391000] set wss 7 on display 1
[ 86.391000] set sb to 3(1)
[ 86.392000] disable wss on display 0
[ 86.393000] set wss 7 on display 1
[ 86.394000] set current avs auto aspect to 16:9
[ 86.394000] disable wss on display 0
[ 86.394000] set wss 7 on display 1
[ 86.394000] set sb to 3(1)
[ 86.400000] set current avs auto aspect to 16:9
[ 86.400000] disable wss on display 0
[ 86.400000] set wss 7 on display 1
[ 86.400000] set sb to 3(1)
[ 86.402000] set current avs auto aspect to 16:9
[ 86.402000] disable wss on display 0
[ 86.402000] set wss 7 on display 1
[ 86.402000] set sb to 3(1)
[ 86.404000] disable wss on display 0
[ 86.404000] set wss 7 on display 1
[ 86.405000] set current avs auto aspect to 16:9
[ 86.405000] disable wss on display 0
[ 86.406000] set wss 7 on display 1
[ 86.406000] set sb to 3(1)
[ 86.411000] set current avs auto aspect to 16:9
[ 86.411000] disable wss on display 0
[ 86.411000] set wss 7 on display 1
[ 86.411000] set sb to 3(1)
[ 86.413000] set current avs auto aspect to 16:9
[ 86.413000] disable wss on display 0
[ 86.413000] set wss 7 on display 1
[ 86.413000] set sb to 3(1)
[ 86.414000] disable wss on display 0
[ 86.414000] set wss 7 on display 1
[ 86.416000] set current avs auto aspect to 16:9
[ 86.416000] disable wss on display 0
[ 86.416000] set wss 7 on display 1
[ 86.416000] set sb to 3(1)
[ 86.422000] set current avs auto aspect to 16:9
[ 86.422000] disable wss on display 0
[ 86.422000] set wss 7 on display 1
[ 86.422000] set sb to 3(1)
[ 86.424000] set current avs auto aspect to 16:9
[ 86.424000] disable wss on display 0
[ 86.424000] set wss 7 on display 1
[ 86.424000] set sb to 3(1)
[ 86.442000] set current avs auto aspect to 16:9
[ 86.442000] disable wss on display 0
[ 86.442000] set wss 7 on display 1
[ 86.442000] set sb to 3(1)
[ 86.444000] set current avs auto aspect to 16:9
[ 86.444000] disable wss on display 0
[ 86.444000] set wss 7 on display 1
[ 86.444000] set sb to 3(1)
[ 86.446000] disable wss on display 0
[ 86.446000] set wss 7 on display 1
[ 86.448000] set current avs auto aspect to 16:9
[ 86.448000] disable wss on display 0
[ 86.448000] set wss 7 on display 1
[ 86.448000] set sb to 3(1)
[ 92.560000] kjournald starting. Commit interval 5 seconds
[ 92.561000] sd 2:0:0:0: [sdb] Unhandled sense code
[ 92.561000] sd 2:0:0:0: [sdb] Result: hostbyte=0x10 driverbyte=0x08
[ 92.561000] sd 2:0:0:0: [sdb] Sense Key : 0x7 [current]
[ 92.561000] Info fld=0x0
[ 92.561000] sd 2:0:0:0: [sdb] ASC=0x27 ASCQ=0x0
[ 92.561000] sd 2:0:0:0: [sdb] CDB: cdb[0]=0x2a: 2a 00 00 00 00 08 00 00 08 00
[ 92.561000] end_request: critical target error, dev sdb, sector 8
[ 92.561000] Buffer I/O error on device sdb1, logical block 0
[ 92.561000] lost page write due to I/O error on sdb1
[ 92.562000] EXT3-fs (sdb1): I/O error while writing superblock
[ 92.562000] EXT3-fs (sdb1): using internal journal
[ 92.562000] EXT3-fs (sdb1): recovery complete
[ 92.562000] EXT3-fs (sdb1): mounted filesystem with writeback data mode
[ 98.920000] sd 2:0:0:0: [sdb] Unhandled sense code
[ 98.921000] sd 2:0:0:0: [sdb] Result: hostbyte=0x10 driverbyte=0x08
[ 98.921000] sd 2:0:0:0: [sdb] Sense Key : 0x7 [current]
[ 98.921000] Info fld=0x0
[ 98.921000] sd 2:0:0:0: [sdb] ASC=0x27 ASCQ=0x0
[ 98.921000] sd 2:0:0:0: [sdb] CDB: cdb[0]=0x2a: 2a 00 00 00 00 08 00 00 08 00
[ 98.921000] end_request: critical target error, dev sdb, sector 8
[ 98.921000] Buffer I/O error on device sdb1, logical block 0
[ 98.921000] lost page write due to I/O error on sdb1
[ 98.923000] EXT3-fs (sdb1): I/O error while writing superblock
[ 105.113000] tsmux set ciclk reg fe to val 00
[ 105.118000] tsmux set ciclk reg fe to val 00
[ 105.122000] tsmux set ciclk reg fe to val 00
[ 105.127000] tsmux set ciclk reg fe to val 00
[ 108.277000] set mute 0 (000) 1
[ 134.809000] prune_queue: c=3cbe4126
[ 333.288000] out of order segment: rcv_next D34722DB seq D347244B - D34729EB
[ 333.371000] ofo requeuing : rcv_next D347244B seq D347244B - D34729EB
root@dm8000:~# [6n

ist damit was anzufangen? muss ich jetzt wieder neu flashen?

Danke

habe gerade den stick rausgeholt und box neugestartet und es läuft alles. Natürlich sind die ganzen plugins weg.

was wird den von euch supported wenn es um flasherweiterungen geht?

vielen Dank

Original von elpolako
habe gerade den stick rausgeholt und box neugestartet und es läuft alles. Natürlich sind die ganzen plugins weg.

was wird den von euch supported wenn es um flasherweiterungen geht?

vielen Dank

NIX

Kann ich den Extensions Ordner auf USB verlagern nach dieser Anleitung ohne bedenken?

Sag mal, was verstehst du nicht an kein Support für solche Spielchen?!

Machen kannst du was du willst, allerdings auf eigene Gefahr hin!

Was an der Frage ob es bei den anderen stabil läuft unter Newnigma oe2 ist support?

Für mich fällt unter support Hilfestellung bei Problemen während und nach der Durchführung der Anleitung.

Und ich habe kein Problem sondern nur eine frage!

Du brauchst mich also nicht blöd anzumachen.

Ist gut. Danke.

Ich verstehe jetzt nicht diese Diskussion.

Das ich mich an Gutemine wenden soll wurde mir schon gesagt und das habe ich auch getan.

die 256 MB meiner DM8000 habe mir nicht gereicht. Aber es spielt jetzt auch überhaupt keine Rolle.

Ich bedanke mich nochmals ganz herzlich für die schnelle Hilfe.

ja ich weis.

Ich hatte nur das Problem das ich keine Plugins mehr installieren konnte und mir wurde auch angezeigt das der voll war.

Ich gebe zu, viel Müll installiert zu haben um auch einfach zu testen was für mich ideal ist.

Als das Problem aufgetreten ist habe ich gelesen das es von Vorteil auch sein soll den Speicher auszulagern um den internen zu schonen. Ob da was dran ist, keine Ahnung aber schonen hört sich gut an.

Die Sache ist einfach die, das hier im NN2 Forum weder Multiboot noch Flasherweiterungen supported werden.
Deshalb der Hinweis auf Gutemine. (Was ja streng genommen schon support ist)
Solche Dinge werden in anderen Foren ausgiebig besprochen.

Hi,
ich denke wenn Ihr OE2 für die kleinen Boxen stellt, solltet Ihr Euch vielleicht auch Gedanken machen oder selbst was entwickeln das die auch in den Genuss von Hbbtv und usw kommen, oder sehe ich das Falsch??????

Ok Danke,
da hast Du wohl Recht!!

Original von sparksofinsanity
Wir benutzen so etwas nicht und kennen uns damit auch nicht aus.
Gutemine hat im ihad gut gepflegte Support Threads und wer seine Plugins benutzen möchte kann sich da auch entsprechend beraten lassen.

Und wie gesagt solche Lösungen sind nicht unproblematisch man sieht es ja an dem Crash.

Ja das stimmt wohl und der USB Stick ist jetzt auch hin. Lässt sich nirgends und mit nichts initialisieren.

Original von sparksofinsanity
Das ist aber alles nicht ganz unkompliziert und unproblematisch.
Frage doch mal bei DMM an wie die sich das gedacht haben ? Am einfachsten wäre es natürlich wenn man direkt auf USB "flashen" könnte

Was bei einer dm500HD aber auch "etwas" komplizierter ist.

Hi,
ja beim Orginal!! Duckundwech!!