Probleme mit der Festplatte

    • Probleme mit der Festplatte

      Ich habe Probleme mit meiner Festplatte in der Dreambox 8000, 3.3.2 stable.

      Was ist passiert? Meine Festplatte wurde fast voll, ca. 29 GB waren noch frei und ich hatte währender der wiedergabe lauter spinner und Aussetzter. Daher hatte ich vor die Festplatte aufzuräumen und habe ca. fürs erste 80 GB gelöscht. Der freie Speicher wurde auch im EMC angezeigt. Nach kurzer Zeit hatte ich das Problem, dass wenn ich Filme löschen wollte, diese zwar aus der Liste verschwunden sind, allerdings nicht im Papierkorb gelandet sind. Via Telnet waren die Datein noch noch da und der Löschbefehl rm wurde mit einer Löschfrage quitiert aber nichts gelöscht.Wie ich später mit mount feststellen konnte hatte sich die Berechtigung von rw auf ro geändert hat.
      Ein Neustart der Box behob das Problem zwar kurzfristig und ich konnte jetzt wieder mittels Telnet oder DCC Daten auf der HDD löschen. Allerdings mit dem Ergebnis, dass jetzt weniger (!) freier Speicherplatz vorhanden war (Ca. 19 GB).
      Diese Spiel wiederholte sich 3 mal bis ich letztendlich 13 GB frei hatte und ich die ganzen gelöschten Filme nicht mehr auf der HDD finden kann.

      Im Menü Information - Über wird ein ganz anderer Speicherplatz ausgewiesen (Bild)

      Kann es sein, dass sich das Filesystem zerschossen hat? Wie kann ich das überprüfen, oder welche Infos braucht ihr noch?

      Wenn ich jetzt Videos ansehen will, hab ich immer noch von Zeit zu Zeit kurze (ca. 1-2sek) Aussetzer mit Spinner.

      Vielen Dank für eure Hilfe!

      Hier noch ein paar weitere System Infos.
      root@dm8000:~# df -h
      Filesystem Size Used Available Use% Mounted on
      /dev/root 248.0M 66.7M 181.3M 27% /
      none 74.2M 60.0K 74.2M 0% /dev
      shm 74.2M 0 74.2M 0% /dev/shm
      /dev/mtdblock2 7.0M 2.7M 4.3M 38% /boot
      tmpfs 74.2M 1.3M 72.9M 2% /var
      tmpfs 74.2M 20.0K 74.2M 0% /tmp
      /dev/sdc1 3.7G 533.4M 3.2G 14% /autofs/4091-7026
      /dev/disk/by-uuid/2fbcb20e-c5e6-4696-b75d-ab2ce4a5a30f
      1.8T 1.7T 13.8G 99% /media/WDCWD20EARS00M


      root@dm8000:~# mount
      rootfs on / type rootfs (rw)
      /dev/root on / type jffs2 (rw)
      proc on /proc type proc (rw)
      sysfs on /sys type sysfs (rw)
      none on /dev type tmpfs (rw)
      devpts on /dev/pts type devpts (rw)
      usbfs on /proc/bus/usb type usbfs (rw)
      shm on /dev/shm type tmpfs (rw)
      /dev/mtdblock2 on /boot type jffs2 (ro)
      tmpfs on /var type tmpfs (rw)
      tmpfs on /tmp type tmpfs (rw)
      /dev/sdc1 on /autofs/4091-7026 type vfat (rw,fmask=0022,dmask=0022,codepage=cp4
      7,iocharset=iso8859-1)
      /dev/disk/by-uuid/2fbcb20e-c5e6-4696-b75d-ab2ce4a5a30f on /media/WDCWD20EARS00M
      type ext3 (rw,data=ordered)
      Bilder
      • screenshot.png

        35,36 kB, 720×405, 917 mal angesehen

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von eisbier ()

    • Hier die SMART - WERTE

      *****************************
      * newnigma2.to *
      *****************************
      * the next step is done *
      *****************************
      OpenDreambox
      dm8000 login: root
      Password:
      root@dm8000:~# smartctl -a /dev/sda
      smartctl version 5.38 [mipsel-oe-linux-gnu] Copyright (C) 2002-8 Bruce Allen
      Home page is smartmontools.sourceforge.net/

      === START OF INFORMATION SECTION ===
      Device Model: WDC WD20EARS-00MVWB0
      Serial Number: WD-WMAZA2450405
      Firmware Version: 51.0AB51
      User Capacity: 2,000,398,934,016 bytes
      Device is: Not in smartctl database [for details use: -P showall]
      ATA Version is: 8
      ATA Standard is: Exact ATA specification draft version not indicated
      Local Time is: Tue Jul 3 09:26:13 2012 CEST
      SMART support is: Available - device has SMART capability.
      SMART support is: Enabled

      === START OF READ SMART DATA SECTION ===
      SMART overall-health self-assessment test result: PASSED

      General SMART Values:
      Offline data collection status: (0x82) Offline data collection activity
      was completed without error.
      Auto Offline Data Collection: Enabled.
      Self-test execution status: ( 0) The previous self-test routine completed
      without error or no self-test has ever
      been run.
      Total time to complete Offline
      data collection: (38760) seconds.
      Offline data collection
      capabilities: (0x7b) SMART execute Offline immediate.
      Auto Offline data collection on/off supp
      ort.
      Suspend Offline collection upon new
      command.
      Offline surface scan supported.
      Self-test supported.
      Conveyance Self-test supported.
      Selective Self-test supported.
      SMART capabilities: (0x0003) Saves SMART data before entering
      power-saving mode.
      Supports SMART auto save timer.
      Error logging capability: (0x01) Error logging supported.
      General Purpose Logging supported.
      Short self-test routine
      recommended polling time: ( 2) minutes.
      Extended self-test routine
      recommended polling time: ( 255) minutes.
      Conveyance self-test routine
      recommended polling time: ( 5) minutes.
      SCT capabilities: (0x3035) SCT Status supported.
      SCT Feature Control supported.
      SCT Data Table supported.

      SMART Attributes Data Structure revision number: 16
      Vendor Specific SMART Attributes with Thresholds:
      ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_
      FAILED RAW_VALUE
      1 Raw_Read_Error_Rate 0x002f 161 161 051 Pre-fail Always -
      2628
      3 Spin_Up_Time 0x0027 253 165 021 Pre-fail Always -
      941
      4 Start_Stop_Count 0x0032 096 096 000 Old_age Always -
      4143
      5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always -
      0
      7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always -
      0
      9 Power_On_Hours 0x0032 095 095 000 Old_age Always -
      3828
      10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always -
      0
      11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always -
      0
      12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always -
      1762
      192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always -
      166
      193 Load_Cycle_Count 0x0032 195 195 000 Old_age Always -
      15645
      194 Temperature_Celsius 0x0022 099 089 000 Old_age Always -
      51
      196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always -
      0
      197 Current_Pending_Sector 0x0032 197 197 000 Old_age Always -
      1173
      198 Offline_Uncorrectable 0x0030 197 197 000 Old_age Offline -
      1067
      199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always -
      0
      200 Multi_Zone_Error_Rate 0x0008 148 148 000 Old_age Offline -
      13955

      SMART Error Log Version: 1
      ATA Error Count: 32 (device log contains only the most recent five errors)
      CR = Command Register [HEX]
      FR = Features Register [HEX]
      SC = Sector Count Register [HEX]
      SN = Sector Number Register [HEX]
      CL = Cylinder Low Register [HEX]
      CH = Cylinder High Register [HEX]
      DH = Device/Head Register [HEX]
      DC = Device Command Register [HEX]
      ER = Error register [HEX]
      ST = Status register [HEX]
      Powered_Up_Time is measured from power on, and printed as
      DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
      SS=sec, and sss=millisec. It "wraps" after 49.710 days.

      Error 32 occurred at disk power-on lifetime: 3828 hours (159 days + 12 hours)
      When the command that caused the error occurred, the device was active or idle
      .

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 38 ce 89 e9 Error: UNC at LBA = 0x0989ce38 = 160026168

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 00 b8 cd 89 e9 00 01:13:36.275 READ DMA
      c8 00 00 b8 cc 89 e9 00 01:13:35.726 READ DMA
      ec 00 1f 98 cd 89 a0 00 01:13:35.722 IDENTIFY DEVICE
      c8 00 00 b8 cc 89 e9 00 01:13:32.633 READ DMA
      ec 00 1f 98 cd 89 a0 00 01:13:32.629 IDENTIFY DEVICE

      Error 31 occurred at disk power-on lifetime: 3828 hours (159 days + 12 hours)
      When the command that caused the error occurred, the device was active or idle
      .

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 98 cd 89 e9 Error: UNC at LBA = 0x0989cd98 = 160026008

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 00 b8 cc 89 e9 00 01:13:32.633 READ DMA
      ec 00 1f 98 cd 89 a0 00 01:13:32.629 IDENTIFY DEVICE
      c8 00 00 b8 cc 89 e9 00 01:13:29.588 READ DMA
      ec 00 1f 98 cd 89 a0 00 01:13:29.584 IDENTIFY DEVICE
      c8 00 00 b8 cc 89 e9 00 01:13:27.290 READ DMA

      Error 30 occurred at disk power-on lifetime: 3828 hours (159 days + 12 hours)
      When the command that caused the error occurred, the device was active or idle
      .

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 98 cd 89 e9 Error: UNC at LBA = 0x0989cd98 = 160026008

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 00 b8 cc 89 e9 00 01:13:29.588 READ DMA
      ec 00 1f 98 cd 89 a0 00 01:13:29.584 IDENTIFY DEVICE
      c8 00 00 b8 cc 89 e9 00 01:13:27.290 READ DMA
      c8 00 00 b8 cb 89 e9 00 01:13:27.209 READ DMA
      c8 00 00 b8 ca 89 e9 00 01:13:27.068 READ DMA

      Error 29 occurred at disk power-on lifetime: 3828 hours (159 days + 12 hours)
      When the command that caused the error occurred, the device was active or idle
      .

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 98 cd 89 e9 Error: UNC at LBA = 0x0989cd98 = 160026008

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 00 b8 cc 89 e9 00 01:13:27.290 READ DMA
      c8 00 00 b8 cb 89 e9 00 01:13:27.209 READ DMA
      c8 00 00 b8 ca 89 e9 00 01:13:27.068 READ DMA
      c8 00 00 b8 c9 89 e9 00 01:13:27.051 READ DMA
      c8 00 00 b8 c8 89 e9 00 01:13:26.970 READ DMA

      Error 28 occurred at disk power-on lifetime: 3828 hours (159 days + 12 hours)
      When the command that caused the error occurred, the device was active or idle
      .

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 88 14 89 e9 Error: UNC at LBA = 0x09891488 = 159978632

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 00 40 14 89 e9 00 01:13:09.985 READ DMA
      c8 00 00 40 13 89 e9 00 01:13:09.949 READ DMA
      c8 00 00 40 12 89 e9 00 01:13:09.478 READ DMA
      c8 00 00 40 11 89 e9 00 01:13:09.383 READ DMA
      c8 00 00 40 10 89 e9 00 01:13:09.318 READ DMA

      SMART Self-test log structure revision number 1
      No self-tests have been logged. [To run self-tests, use: smartctl -t]


      SMART Selective self-test log data structure revision number 1
      SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
      1 0 0 Not_testing
      2 0 0 Not_testing
      3 0 0 Not_testing
      4 0 0 Not_testing
      5 0 0 Not_testing
      Selective self-test flags (0x0):
      After scanning selected spans, do NOT read-scan remainder of disk.
      If Selective self-test is pending on power-up, resume after 0 minute delay.

      root@dm8000:~#

      Eine Festplattenüberprüfung liefert folgende Fehlermeldung (Bild)

      Fsck in Telnet liefert folgendes :

      root@dm8000:~# fsck
      fsck (busybox 1.15.3, 2011-10-10 16:37:27 UTC)
      fsck: fsck.auto: No such file or directory


      btw. Ich wollte auch ein Bootlog erstellen, hab nur leider gemerkt, dass das RS232-USB-Kabel welches ich damals gekauft habe und heute verwenden will einen männlichen Stecker hat. Muss daher erst noch einen Adapter besorgen.
      Bilder
      • screenshot2.png

        10,26 kB, 720×405, 828 mal angesehen

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von eisbier ()

    • Quellcode

      1. 1 Raw_Read_Error_Rate 0x002f 161 161 051 Pre-fail Always - 2628
      2. 198 Offline_Uncorrectable 0x0030 197 197 000 Old_age Offline - 1067
      3. 200 Multi_Zone_Error_Rate 0x0008 148 148 000 Old_age Offline - 13955


      Naja sieht "kaputt" aus