servus leute!

welche art von festplatte würdet ihr mir empfehlen, ich will mir eine 500 GB festpaltte kaufen, weiß aber nicht ob ich eine USB oder sata festplatte nehmen soll.

ODER gibt festplatte mit beiden anschlüssen?

was sind die vorteile bzw. nachteil bei den o.g. platten. möchte die platte jedoch nicht in der 800 einbauen (also nicht im original gehäuse) ich möchte die festplatte seperat haben.

danke für die hinweise!

so nun hab ich meine festplatte, ich habe mich für eine WD My Book Home 500 GB
entschieden, kann die aber nicht intialisieren!

kann mit mal einer erklären wie das geht.

servus,

ich hatte zuerst meine WD 500 GB festplatte über USB angeschlossen (ich hatte nicht ein richtiges sata kabel (habe nicht gewußt dass es einen I und L type gibt, bei der dream sowie bei der WD 500 GB brauche ich aber ein I Type)

so nun habe ich mir ein kurzes (0.5 m) sata kabel - ich habe das usb entfernt und die festplatte per esata angeschlossen.

jetzt wird die platte nicht erkannt!

wer kann helfen?

... in der Rück-blende geführt ...

sorry versteh nicht ganz was du meinst?

d
m
e
s
g


/serial/usb-serial.c: USB Serial support registered for FTDI FT2232C Compatible
drivers/usb/serial/usb-serial.c: USB Serial support registered for USB-UIRT Infrared Tranceiver
drivers/usb/serial/usb-serial.c: USB Serial support registered for Home-Electronics TIRA-1 IR Transceiver
usbcore: registered new driver ftdi_sio
drivers/usb/serial/ftdi_sio.c: v1.4.2:USB FTDI Serial Converters Driver
drivers/usb/serial/usb-serial.c: USB Serial support registered for PL-2303
usbcore: registered new driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.12
1619 ms: 20
sync is off so we enable it
playback!
VIDEO0: first pts d2c6aa50
VIDEO0: aspect changed 1
VIDEO0: framerate changed 3
VIDEO0: resolution changed (1280 720)
set current avs auto aspect to 16:9
set sb to 2
SB final value: 2
disable wss on display 0
disable wss on display 1
set current avs auto aspect to 16:9
set sb to 2
SB final value: 2
disable wss on display 0
disable wss on display 1
VIDEO0: set blank to 0
no decoder left in sync handling so disable xpt_sync
disable video clip (SET_SOURCE_DEMUX)... no more device writers!
499 ms: 21
34 ms: 22
VIDEO0: progressive changed (1)
2802 ms: 23
156 ms: 24
eth0 Link UP.
5944 ms: 25
266 ms: =s
3680 ms: 41 Starting /etc/rcS.d/S40networking...
215 ms: =s
509 ms: 49 Starting /etc/rcS.d/S98configure...
sync is off so we enable it
playback!
VIDEO0: first pts d2c6aa50
VIDEO0: set blank to 0
no decoder left in sync handling so disable xpt_sync
disable video clip (SET_SOURCE_DEMUX)... no more device writers!
bcmfb: enable manual blit
bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
JFFS2 notice: (107) check_node_data: wrong data CRC in data node at 0x039da600: read 0x4ce3dff8, calculated 0x817cebfd.
22669 ms: =s
11 ms: 50
343 ms: 50
48 ms: 50
127 ms: 50
2238 ms: 50
1075 ms: 53
alps_bsbe2 is in powersave mode now
1445 ms: 55
439 ms: 56
11 ms: 57
5 ms: 57
10 ms: 57
7 ms: 57
209 ms: 57
944 ms: 57


8349 ms: 58
39 ms: 70
14 ms: 70
5 ms: 70
122 ms: 70
26 ms: 70
143 ms: 70
139 ms: 70
6 ms: 70
1109 ms: 70
6 ms: 72
28 ms: 72
43 ms: 72
59 ms: 72
4 ms: 72
13 ms: 72
190 ms: 72
6134 ms: 72
6 ms: 80
375 ms: 80
5 ms: 80
98 ms: 80
8 ms: 81
12 ms: 81
14 ms: 81
41 ms: 81
38 ms: 81
5 ms: 81
bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
930 ms: 81
17 ms: 82
set colorformat to 1
set current avs auto aspect to 16:9
set sb to 2
SB final value: 2
disable wss on display 0
disable wss on display 1
set current avs auto aspect to 4:3
set sb to 2
SB final value: 2
disable wss on display 0
disable wss on display 1
set current avs auto aspect to 4:3
set sb to 2
SB final value: 2
disable wss on display 0
disable wss on display 1
disable wss on display 0
set wss 8 on display 1
set sb to 2
SB final value: 2
disable wss on display 0
set wss 8 on display 1
set current avs auto aspect to 4:3
set sb to 2
SB final value: 2
disable wss on display 0
set wss 8 on display 1
disable wss on display 0
set wss 8 on display 1
set sb to 2
SB final value: 2
set colorformat to 1
set current avs auto aspect to 4:3
set sb to 2
SB final value: 2
disable wss on display 0
set wss 8 on display 1
set ac3 to downmix
246 ms: 82
21 ms: 82
112 ms: 82
612 ms: 82
1156 ms: 83
42 ms: 85
1723 ms: 85
15 ms: 87
28 ms: 87
set current avs auto aspect to 16:9
set sb to 2
SB final value: 2
disable wss on display 0
set wss 8 on display 1
set current avs auto aspect to 16:9
set sb to 2
SB final value: 2
disable wss on display 0
set wss 8 on display 1
disable wss on display 0
set wss 8 on display 1
set sb to 3
SB final value: 1
set current avs auto aspect to 16:9
set sb to 3
SB final value: 1
disable wss on display 0
set wss 8 on display 1
set current avs auto aspect to 16:9
set sb to 3
SB final value: 1
disable wss on display 0
set wss 8 on display 1
set current avs auto aspect to 16:9
set sb to 3
SB final va
lue: 1
disable wss on display 0
set wss 8 on display 1
disable wss on display 0
set wss 8 on display 1
set sb to 3
SB final value: 1
set current avs auto aspect to 16:9
set sb to 3
SB final value: 1
disable wss on display 0
set wss 8 on display 1
set current avs auto aspect to 16:9
set sb to 3
SB final value: 1
disable wss on display 0
set wss 8 on display 1
set current avs auto aspect to 16:9
set sb to 3
SB final value: 1
disable wss on display 0
set wss 8 on display 1
disable wss on display 0
set wss 8 on display 1
set sb to 3
SB final value: 1
set current avs auto aspect to 16:9
set sb to 3
SB final value: 1
disable wss on display 0
set wss 8 on display 1
set current avs auto aspect to 16:9
set sb to 3
SB final value: 1
disable wss on display 0
set wss 8 on display 1
set current avs auto aspect to 16:9
set sb to 3
SB final value: 1
disable wss on display 0
set wss 8 on display 1
disable wss on display 0
set wss 8 on display 1
set sb to 3
SB final value: 1
set current avs auto aspect to 16:9
set sb to 3
SB final value: 1
disable wss on display 0
set wss 8 on display 1
set current avs auto aspect to 16:9
set sb to 3
SB final value: 1
disable wss on display 0
set wss 8 on display 1
set current avs auto aspect to 16:9
set sb to 3
SB final value: 1
disable wss on display 0
set wss 8 on display 1
set current avs auto aspect to 16:9
set sb to 3
SB final value: 1
disable wss on display 0
set wss 8 on display 1
set current avs auto aspect to 16:9
set sb to 3
SB final value: 1
disable wss on display 0
set wss 8 on display 1
disable wss on display 0
set wss 8 on display 1
set sb to 3
SB final value: 1
set current avs auto aspect to 16:9
set sb to 3
SB final value: 1
disable wss on display 0
set wss 8 on display 1
8793 ms: 87
698 ms: 98
115 ms: 99
set mute 0 (000)
120 ms: 99
32 ms: 99
alps_bsbe2 is in normal mode now
DISEQC: e0
DISEQC: 10
DISEQC: 38
DISEQC: f4
DISEQC: e0
DISEQC: 10
DISEQC: 38
DISEQC: f4
start pcr0 on dmx 0 p
id:547 index 4
start video0 on dmx 0 pid:547
sync is off so we enable it
demux-index 0 pcr0pid 547
using 4 as pcr0 pidchannel
start audio on dmx 0 pid:548
audio xpt start
MPEG
audio: streamtype set 0
audio: streamtype_set: stop rave
audio: streamtype_set: restart rave
set mute 0 (111)
audio: decoder start
ch0: lock
RAP first pts a2780783
RAP sampling rate info isr
eBitRateChange Isr.. set source_changed_event!
eModeChange Isr.. set source_changed_event!
audio sampling rate event handler ... NYI!
VIDEO0: first pts a278b6db
VIDEO0: aspect changed 2
VIDEO0: resolution changed (544 576)
set current avs auto aspect to 16:9
set sb to 3
SB final value: 1
disable wss on display 0
set wss 8 on display 1
enable tsm0
VIDEO0: progressive changed (0)
HDMI: hotplug handler!
SET FORMAT: display[0], format=18
NO HDMI detected
DVI mode
using colorspace: 0
bcm_video_analog_port_setup (fmt=6)
SET FORMAT: display[1], format=6
set current avs auto aspect to 16:9
set sb to 3
SB final value: 1
disable wss on display 0
set wss 8 on display 1
HDMI: hotplug handler!
HDMI: no device attached
HDMI: hotplug handler!
SET FORMAT: display[0], format=18
HDMI detected
HDMI mode
using colorspace: 1
bcm_video_analog_port_setup (fmt=6)
SET FORMAT: display[1], format=6
set current avs auto aspect to 16:9
set sb to 3
SB final value: 1
disable wss on display 0
set wss 8 on display 1
root@dm800:~#

ich habe das "enigma2-plugin-extensions-usb2hdd_0.1.6_ mipsel.ipk" von hier


i-have-a-dreambox.com/wbb2/thr…=90055&hilight=festplatte

installiert als ich die platte über USB zur box verbunden hatte