Hi all,

There are a lot of articles here, but a lot of them are in German, and my German is not especially good.

This is my config:
DM800SE
Cable Tuner (Scandinavian Canal Digital KTV)
Newnigma 4.0.11
SKIN: infinity.mod.newnigma2-HD
USB Stick mounted as /media/usb

Picons downloaded from Halle's Picon Pack (piconpack.blogspot.com/) but the page is in Swedish, and should be for Cable.

My questions is;
1) How do I set up OSD Settings (Expert or USB stick)
1a) If Expert, where do I put the picons?
1b) If USB Stick, where do I put the picons?

2) In Expert Settings, I can only set /picons/ (or change the path physically)
2a) With Q1 in mind, what is the correct setting here?

3) Final is; for the Scandinavian Canal Digital KTV Cable Service, what package (if any) from Newnigma2 can I use?

I hope somebody will take the time to assist me to get this to work.

PS; Of course; I would like to get the ChannelList and LCD to work also

Kind Regards,
AFX in Norway

Hi Joey,

Thanks for the help so far.
I will then under <blue-System Tools-Expert Settings> set folder path to /media/usb/picons

Under <blue-OSD Settings> should I just use /picons/ ?

At last, is it a special name format (text) for the .png to be recognized?
Like BBC HD on 0.8W, the .png I have is named BBC_HD.png.

Ok; did actually just figure this out

But; can I have a picon for HD in the /picon list, or does Newnigna look in the piconHD folder for HD channels?

In DreamboxEdit, I can set a folder for picon path, and I did set /media/usb/picons

Just about to try to see what happens ...

Joey,

I did as you said.
Blue-System Tools-Expert Settings, changed path to "/media/usb/picons/"
Then Blue-OSD Settings and did set directory to the same

In Dreambox Edit, when I add a picon to a service, it creates the file with correct name.
I did put these files both in /media/usb/picons/picon and /media/usb/picons/piconHD, but still without luck

Can it be my Skin that does not support picons ??

I found in a different post the Picon Debug=an from telnet, but it doesnt work.

Im stuck!

EDIT; copied all the files from /picon to /piconHD and it worked !!!

Then I have a new question; the images is 100x60, will they work for ChannelList ?

EDIT 2: ALL WORKS !

Thank you Joey, putting me back on track. See I need to find smaller inages for Channel List, they got to big using 100x60, but same size (100x60) works great for LCD....

Thanks for helping me Joey,

HD Skin working perfect
LCD working perfect
ServiceList awful (set the size to 50x30)... Still way to big...

And what is xPicons ?