Das letzte Update ist allerdings etwa zwei Monate her. Ich kann hier kein Problem mit dem Webinterface nachstellen und z.B. zwischen Betrieb und Idle hin- und herschalten.
Angepinnt OE2.5: Rückmeldungen zum weekly Image für DM520/DM525/DM820 und DM7080
-
-
zaratusta schrieb:
Es geht eigentlich alles im Webcontrol bis auf die (Power) Funktionen.
Da erscheint folgende Meldung: Request failed for /web/powerstate / Staus 500 internal Server Error
Man kann sich behelfen, indem man im Webcontrol / Steuerung die WebRemote benutzt. -
Hab ich das richtig verstanden?
Webinterface > oben "Power" > dann "Idle" > geht nicht
Webinterface > Steuerung > Webremote > Idle > geht? -
Power / Idle geht nicht.
Steuerung WebRemote aufrufen und dann mit der WebRemote entweder über Menü / "Standby / Neustart" oder die Ein/Aus-Taste geht. -
-
Da müssen andere helfen, ich kann nur für die 900 und eine 920 sprechen.
-
Wie, du hast das Problem auch bei den 9x0?
Dann wird es eher ein lokales Problem oder etwas einstellungsbedingtes sein. Hier geht die Funktion ohne Probleme im Softwarestand 12.07. -
Hier auch auf allen OE2.5 Boxen. Der internal server error 500 kommt schon beim Aufruf des Webinterface im FF Browser.
-
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von Joey ()
-
Joey schrieb:
Das letzte Update ist allerdings etwa zwei Monate her.
-
Das ist mir schon klar, nur finde ich innerhalb der letzten zwei Monate keine Updates, die damit etwas zu tun haben könnten und was erschwerend hinzukommt, kann ich den Fehler absolut nicht nachvollziehen.
Kannst du mal meine Webinterface-Einstellungen übernehmen, den Browsercache leeren, die Box neu starten, den Browser neu starten und dann nochmal testen? -
Ich habe das Backup von gestern zurückgespielt und der Zugriff (Power) mit dem Webinterface geht wieder.
-
Von gestern auf heute hat sich nichts geändert. Image und Feeds werden nur einmal in der Woche neu gebaut (jeweils sonntags).
Kannst du mal mit Softwarestand 12.07. testen, was ich im Beitrag über deinem geschrieben habe? -
Ich aktualisiere manuell. Gestern vor dem Aktualsieren habe ich das Backup gemacht. Das vorletzte Backup ist vom 5.7. und davor von 29.6..
-
Bei mir verschwindet die Fehlermeldung wenn ich die gutemine Erweiterungen deinstalliere. Vielleicht kann das jemand anderes noch bestätigen?
-
Vielleicht versteht jetzt mal jemand wie schön das für Imagebauer ist, wenn Fremdfeeds installiert sind.
-
jetzt müsste das nur noch jemand im toten sourgeforge support forum berichten ...
ich sag's mal zweideutig:
don't feed the troll ...
-
Joey schrieb:
Vielleicht versteht jetzt mal jemand wie schön das für Imagebauer ist, wenn Fremdfeeds installiert sind.
-
Ich installiere keine Software von gutemine, auch nicht zum Testen und habe mit keinem Wort behauptet, dass es daran liegt.
Ich habe nach dem Test mit einem Gebrauchsimage das nackte Image vom 12.07. ohne Übernahme von Einstellungen geflasht, den Startwizard durchlaufen und das Webinterface getestet. Beides geht hier ohne Beanstandung. -
Also liebe Leute, gutemine hat geantwortet: sourceforge.net/p/gutemine/plu…read/44617b4e2e/?limit=25
hier funktioniert alles wieder
Wichtig: nachdem dBackup aktualisiert wurde noch einmal das Webinterface neu installieren > apt --reinstall install enigma2-plugin-extensions-webinterfaceDieser Beitrag wurde bereits 1 mal editiert, zuletzt von hmich ()
-
Teilen
- Facebook 0
- Twitter 0
- Google Plus 0
- Reddit 0
-
Benutzer online 1
1 Besucher