Hello,
As I'm done setting-up my home installation thanks to all of you and thanks to the precious HowTo section of this forum I'm just left with one question.
In order to understand here is my configuration :
- dm920 has tuners inside
- dm900 has no tuner inside and gets all channels through the dm920 (with partnerbox method)
On the dm920 all the picons work fine and are visible in the channel list before the name of the channel, on the infobar, and in the channel list above the description and on the LCD display.
So everything is fine.
However on the dm900 the picons do appear in the channel list before the name of the channel BUT they do not appear on the infobar, in the channel list above the description and neither on the LCD display.
I first thought to check the name of the picons and adapt them.
In fact, for the dm920, the picons' names are like "1_0_19_4E85_C9_1_FFFF0000_0_0_0.png"
As on the dm900 the service appears in such a way "1:256:19:4E85:C9:1:FFFF0000:0:0:0.png" I was thinking to change all picons' names so that the "1_0_" would be replaced by "1_256_"
But it didn't work. And it actually changed in worst as the picons which would normally still appear in the channel list before the name of the channel don't appear anymore.
Any idea how to solve this ?
As I'm done setting-up my home installation thanks to all of you and thanks to the precious HowTo section of this forum I'm just left with one question.
In order to understand here is my configuration :
- dm920 has tuners inside
- dm900 has no tuner inside and gets all channels through the dm920 (with partnerbox method)
On the dm920 all the picons work fine and are visible in the channel list before the name of the channel, on the infobar, and in the channel list above the description and on the LCD display.
So everything is fine.
However on the dm900 the picons do appear in the channel list before the name of the channel BUT they do not appear on the infobar, in the channel list above the description and neither on the LCD display.
I first thought to check the name of the picons and adapt them.
In fact, for the dm920, the picons' names are like "1_0_19_4E85_C9_1_FFFF0000_0_0_0.png"
As on the dm900 the service appears in such a way "1:256:19:4E85:C9:1:FFFF0000:0:0:0.png" I was thinking to change all picons' names so that the "1_0_" would be replaced by "1_256_"
But it didn't work. And it actually changed in worst as the picons which would normally still appear in the channel list before the name of the channel don't appear anymore.
Any idea how to solve this ?