Ich habe nun schon alle Versionen von Newnigama ( 2.8.1./2.8.2/2.8.3 )
Ich habe die installiert aber meine Medien werden nicht erkannt .
Kann das sein das es Backfehler in der soft Ware sind .
Ich habe eine USB HDD 1TB in Hardware ist die da und erkannt.
Steht sogar sda aber sie taucht nicht auf .
Die HDD ist in Ext3 format.
Telnet hat mir einer versucht zu helfen aber ohne erfolg. da ich mich da nicht auskenne.
Bin da Leihe.
Habe mir einen USB stick besorgt in Fat da kommt keine Medien .
Da sind 4 GB MP3 drauf.
Habe nun den MP3 Player geladen online nun gehen die MP3 .
Aber HDD nicht Mediaplayer / Mediacender alles geldaden.
In allen anderen Image ohne problem.
Nur in Newnigama da werden die 600GB Filme nicht engezeit .
Hoffe ich habe spezialiesten von euch angesprochen da Newenigama ein hammer image ist.
Ist die soft ware bei euch für Original oder Klone oder Beides mal aus neugiere
PS:
Wenn möglich ohne fach chinesisch.
Da ich leihe bin und nuuuul anung habe .
Aber beim lernen bin.
Telnet ausdruck:
*****************************
* newnigma2.to *
*****************************
* the next step is done *
*****************************
OpenDreambox 1.5.0 dm800
dm800 login: root
root@dm800:~# mount
/dev/mtdblock3 on / type jffs2 (rw,noatime)
none on /dev type devfs (rw)
proc on /proc type proc (rw,nodiratime)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw)
usbdevfs on /proc/bus/usb type usbfs (rw)
/dev/mtdblock/2 on /boot type jffs2 (ro,noatime)
tmpfs on /var type tmpfs (rw)
tmpfs on /tmp type tmpfs (rw)
/dev/sdb1 on /autofs/3433-3231 type vfat (rw,nodiratime,fmask=0022,dmask=0022,co
depage=cp437,iocharset=iso8859-1)
root@dm800:~# dmesg
set wss 7 on display 1
tda: afc=1 (-13476 Hz)
start pcr0 on dmx 0 pid:ff index 5
start audio on dmx 0 pid:100
audio xpt start
sync is off so we enable it
demux-index 0 pcr0pid ff
using 5 as pcr0 pidchannel
MPEG
audio: decoder start 0
video delay 0 (0 ms)
total video delay: 0 (0 ms)
start video0 on dmx 0 pid:ff
total video delay: 0 (0 ms)
VIDEO0: start decode
tda: afc=1 (-13476 Hz)
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
set sb to 3(1)
disable wss on display 0
set wss 7 on display 1
ch0: lock
RAP first pts 0xdb226b26, stc 0xdb225fab, pcr valid
RAP sampling rate info isr
eModeChange Isr.. set source_changed_event!
audio sampling rate event handler ... NYI!
VIDEO0: first pts db22cef7
VIDEO0: aspect changed 3
set current avs auto aspect to 16:9
set sb to 3(1)
disable wss on display 0
set wss 7 on display 1
VIDEO0: progressive changed (0)
enable tsm0
hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0004
brcm-ehci brcm-ehci.0: GetStatus port 2 status 001002 POWER sig=se0 CSC
hub 1-0:1.0: port 2, status 0100, change 0001, 12 Mb/s
usb 1-2: USB disconnect, address 4
usb 1-2: usb_disable_device nuking all URBs
usb 1-2: unregistering interface 1-2:1.0
usb 1-2:1.0: hotplug
usb 1-2: unregistering device
usb 1-2: hotplug
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0004
brcm-ehci brcm-ehci.0: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
brcm-ehci brcm-ehci.0: port 2 high speed
brcm-ehci brcm-ehci.0: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
usb 1-2: new high speed USB device using brcm-ehci and address 6
brcm-ehci brcm-ehci.0: port 2 high speed
brcm-ehci brcm-ehci.0: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
usb 1-2: default language 0x0409
usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=5
usb 1-2: Product: USB to ATA/ATAPI Bridge
usb 1-2: Manufacturer: JMicron
usb 1-2: SerialNumber: DCA43162073F
usb 1-2: hotplug
usb 1-2: adding 1-2:1.0 (config #1, interface 0)
usb 1-2:1.0: hotplug
usb-storage 1-2:1.0: usb_probe_interface
usb-storage 1-2:1.0: usb_probe_interface - got id
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
Vendor: WDC WD10 Model: EAVS-22D7B0 Rev:
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB)
sda: assuming drive cache: write through
SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB)
sda: assuming drive cache: write through
/dev/scsi/host4/bus0/target0/lun0: unknown partition table
Attached scsi disk sda at scsi4, channel 0, id 0, lun 0
usb-storage: device scan complete
kobject_register failed for scsi_mod (-17)
Call Trace:
[<80130514>] kobject_register+0x74/0x8c
[<801304cc>] kobject_register+0x2c/0x8c
[<800453b0>] load_module+0x1390/0x13e8
[<80045110>] load_module+0x10f0/0x13e8
[<80058d38>] vma_prio_tree_insert+0x28/0x5c
[<8005eff8>] __vma_link+0x34/0x80
[<8005fb4c>] vma_link+0x88/0x114
[<8005fb0c>] vma_link+0x48/0x114
[<80060eb0>] do_mmap_pgoff+0x750/0x790
[<80060dfc>] do_mmap_pgoff+0x69c/0x790
[<80046860>] sys_init_module+0x84/0x474
[<8000bbb4>] do_ri+0x104/0x278
[<8000d284>] stack_done+0x20/0x3c
[<80004bcc>] handle_ri_int+0x20/0x34
ch0: unlock
XVD pts error PTS 0xe053f63f, STC 0xe05e5485, type 1
ch0: lock
RAP pts error 0 PTS 0xe053c50e, STC 0xe05e551a, type 1
RAP pts error 0 PTS 0xe053c946, STC 0xe05e594d, type 1
XVD pts error PTS 0xe053fd47, STC 0xe05e6295, type 1
XVD pts error PTS 0xe054044f, STC 0xe05e6618, type 1
XVD pts error PTS 0xe0540b57, STC 0xe05e699d, type 1
rap watchdog flush!
flush audio decode
video delay 0 (0 ms)
total video delay: 0 (0 ms)
ch0: lock
RAP first pts 0xe05eb216, stc 0xe05ea6ce, pcr valid
RAP sampling rate info isr
eModeChange Isr.. set source_changed_event!
audio sampling rate event handler ... NYI!
ch0: unlock
ch0: lock
RAP pts error 0 PTS 0xe0970e36, STC 0xe0c2c228, type 1
RAP pts error 0 PTS 0xe097126e, STC 0xe0c2c65c, type 1
RAP pts error 0 PTS 0xe09716a6, STC 0xe0c2ca93, type 1
RAP pts error 0 PTS 0xe0971ade, STC 0xe0c2cecb, type 1
XVD pts error PTS 0xe09739c7, STC 0xe0c2d3de, type 1
XVD pts error PTS 0xe09740cf, STC 0xe0c2de67, type 1
XVD pts error PTS 0xe0974edf, STC 0xe0c2e1f0, type 1
XVD pts error PTS 0xe09755e7, STC 0xe0c2ec77, type 1
XVD pts error PTS 0xe09763f7, STC 0xe0c2effe, type 1
XVD pts error PTS 0xe0976aff, STC 0xe0c2f709, type 1
XVD pts error PTS 0xe097790f, STC 0xe0c2fa89, type 1
rap watchdog flush!
flush audio decode
video delay 0 (0 ms)
total video delay: 0 (0 ms)
ch0: lock
XVD pts error PTS 0xe0978017, STC 0xe0c316a7, type 1
RAP first pts 0xe0c32796, stc 0xe0c31bb0, pcr valid
XVD pts error PTS 0xe0978e27, STC 0xe0c31db5, type 1
RAP sampling rate info isr
eModeChange Isr.. set source_changed_event!
audio sampling rate event handler ... NYI!
out of order segment: rcv_next 38BF225E seq 38BF22AE - 38BF22B6
ofo requeuing : rcv_next 38BF22AE seq 38BF22AE - 38BF22B6
stop pcr0 on dmx 0 pid:ff
stop video0 on dmx 0 pid:ff
VIDEO0: stop decode
VIDEO0: set blank to 1
audio: decoder stop
stop audio on dmx 0 pid:100
audio: xpt stop(3)
no decoder left in sync handling so disable xpt_sync
bcm_audio_channel_stop(3) done
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
set sb to 3(1)
disable wss on display 0
set wss 7 on display 1
tda: afc=0 (0 Hz)
start pcr0 on dmx 0 pid:ff index 7
start audio on dmx 0 pid:100
audio xpt start
sync is off so we enable it
demux-index 0 pcr0pid ff
using 7 as pcr0 pidchannel
MPEG
audio: decoder start 0
video delay 0 (0 ms)
total video delay: 0 (0 ms)
start video0 on dmx 0 pid:ff
total video delay: 0 (0 ms)
VIDEO0: start decode
tda: afc=1 (-13476 Hz)
ch0: lock
RAP first pts 0xa58f330, stc 0xa58e7d4, pcr valid
RAP sampling rate info isr
eModeChange Isr.. set source_changed_event!
audio sampling rate event handler ... NYI!
VIDEO0: first pts a59d2aa
VIDEO0: resolution changed (480 576)
VIDEO0: aspect changed 2
set current avs auto aspect to 16:9
set sb to 3(1)
disable wss on display 0
set wss 7 on display 1
enable tsm0
stop pcr0 on dmx 0 pid:ff
stop video0 on dmx 0 pid:ff
VIDEO0: stop decode
VIDEO0: set blank to 1
audio: decoder stop
stop audio on dmx 0 pid:100
audio: xpt stop(5)
no decoder left in sync handling so disable xpt_sync
bcm_audio_channel_stop(5) done
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
set sb to 3(1)
disable wss on display 0
set wss 7 on display 1
tda: afc=1 (-13476 Hz)
start pcr0 on dmx 0 pid:64b index 6
start audio on dmx 0 pid:64c
audio xpt start
sync is off so we enable it
demux-index 0 pcr0pid 64b
using 6 as pcr0 pidchannel
MPEG
audio: decoder start 0
video delay 0 (0 ms)
total video delay: 0 (0 ms)
start video0 on dmx 0 pid:64b
total video delay: 0 (0 ms)
VIDEO0: start decode
ch0: lock
tda: afc=1 (-13476 Hz)
RAP first pts 0x67ba6e76, stc 0x67ba6d98, pcr valid
RAP sampling rate info isr
eModeChange Isr.. set source_changed_event!
audio sampling rate event handler ... NYI!
VIDEO0: first pts 67bb227d
VIDEO0: resolution changed (704 576)
enable tsm0
out of order segment: rcv_next 38C04768 seq 38C04770 - 38C04778
ofo requeuing : rcv_next 38C04770 seq 38C04770 - 38C04778
root@dm800:~#
Ich habe die installiert aber meine Medien werden nicht erkannt .
Kann das sein das es Backfehler in der soft Ware sind .
Ich habe eine USB HDD 1TB in Hardware ist die da und erkannt.
Steht sogar sda aber sie taucht nicht auf .
Die HDD ist in Ext3 format.
Telnet hat mir einer versucht zu helfen aber ohne erfolg. da ich mich da nicht auskenne.
Bin da Leihe.
Habe mir einen USB stick besorgt in Fat da kommt keine Medien .
Da sind 4 GB MP3 drauf.
Habe nun den MP3 Player geladen online nun gehen die MP3 .
Aber HDD nicht Mediaplayer / Mediacender alles geldaden.
In allen anderen Image ohne problem.
Nur in Newnigama da werden die 600GB Filme nicht engezeit .
Hoffe ich habe spezialiesten von euch angesprochen da Newenigama ein hammer image ist.
Ist die soft ware bei euch für Original oder Klone oder Beides mal aus neugiere
PS:
Wenn möglich ohne fach chinesisch.
Da ich leihe bin und nuuuul anung habe .
Aber beim lernen bin.
Telnet ausdruck:
*****************************
* newnigma2.to *
*****************************
* the next step is done *
*****************************
OpenDreambox 1.5.0 dm800
dm800 login: root
root@dm800:~# mount
/dev/mtdblock3 on / type jffs2 (rw,noatime)
none on /dev type devfs (rw)
proc on /proc type proc (rw,nodiratime)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw)
usbdevfs on /proc/bus/usb type usbfs (rw)
/dev/mtdblock/2 on /boot type jffs2 (ro,noatime)
tmpfs on /var type tmpfs (rw)
tmpfs on /tmp type tmpfs (rw)
/dev/sdb1 on /autofs/3433-3231 type vfat (rw,nodiratime,fmask=0022,dmask=0022,co
depage=cp437,iocharset=iso8859-1)
root@dm800:~# dmesg
set wss 7 on display 1
tda: afc=1 (-13476 Hz)
start pcr0 on dmx 0 pid:ff index 5
start audio on dmx 0 pid:100
audio xpt start
sync is off so we enable it
demux-index 0 pcr0pid ff
using 5 as pcr0 pidchannel
MPEG
audio: decoder start 0
video delay 0 (0 ms)
total video delay: 0 (0 ms)
start video0 on dmx 0 pid:ff
total video delay: 0 (0 ms)
VIDEO0: start decode
tda: afc=1 (-13476 Hz)
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
set sb to 3(1)
disable wss on display 0
set wss 7 on display 1
ch0: lock
RAP first pts 0xdb226b26, stc 0xdb225fab, pcr valid
RAP sampling rate info isr
eModeChange Isr.. set source_changed_event!
audio sampling rate event handler ... NYI!
VIDEO0: first pts db22cef7
VIDEO0: aspect changed 3
set current avs auto aspect to 16:9
set sb to 3(1)
disable wss on display 0
set wss 7 on display 1
VIDEO0: progressive changed (0)
enable tsm0
hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0004
brcm-ehci brcm-ehci.0: GetStatus port 2 status 001002 POWER sig=se0 CSC
hub 1-0:1.0: port 2, status 0100, change 0001, 12 Mb/s
usb 1-2: USB disconnect, address 4
usb 1-2: usb_disable_device nuking all URBs
usb 1-2: unregistering interface 1-2:1.0
usb 1-2:1.0: hotplug
usb 1-2: unregistering device
usb 1-2: hotplug
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0004
brcm-ehci brcm-ehci.0: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
brcm-ehci brcm-ehci.0: port 2 high speed
brcm-ehci brcm-ehci.0: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
usb 1-2: new high speed USB device using brcm-ehci and address 6
brcm-ehci brcm-ehci.0: port 2 high speed
brcm-ehci brcm-ehci.0: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
usb 1-2: default language 0x0409
usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=5
usb 1-2: Product: USB to ATA/ATAPI Bridge
usb 1-2: Manufacturer: JMicron
usb 1-2: SerialNumber: DCA43162073F
usb 1-2: hotplug
usb 1-2: adding 1-2:1.0 (config #1, interface 0)
usb 1-2:1.0: hotplug
usb-storage 1-2:1.0: usb_probe_interface
usb-storage 1-2:1.0: usb_probe_interface - got id
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
Vendor: WDC WD10 Model: EAVS-22D7B0 Rev:
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB)
sda: assuming drive cache: write through
SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB)
sda: assuming drive cache: write through
/dev/scsi/host4/bus0/target0/lun0: unknown partition table
Attached scsi disk sda at scsi4, channel 0, id 0, lun 0
usb-storage: device scan complete
kobject_register failed for scsi_mod (-17)
Call Trace:
[<80130514>] kobject_register+0x74/0x8c
[<801304cc>] kobject_register+0x2c/0x8c
[<800453b0>] load_module+0x1390/0x13e8
[<80045110>] load_module+0x10f0/0x13e8
[<80058d38>] vma_prio_tree_insert+0x28/0x5c
[<8005eff8>] __vma_link+0x34/0x80
[<8005fb4c>] vma_link+0x88/0x114
[<8005fb0c>] vma_link+0x48/0x114
[<80060eb0>] do_mmap_pgoff+0x750/0x790
[<80060dfc>] do_mmap_pgoff+0x69c/0x790
[<80046860>] sys_init_module+0x84/0x474
[<8000bbb4>] do_ri+0x104/0x278
[<8000d284>] stack_done+0x20/0x3c
[<80004bcc>] handle_ri_int+0x20/0x34
ch0: unlock
XVD pts error PTS 0xe053f63f, STC 0xe05e5485, type 1
ch0: lock
RAP pts error 0 PTS 0xe053c50e, STC 0xe05e551a, type 1
RAP pts error 0 PTS 0xe053c946, STC 0xe05e594d, type 1
XVD pts error PTS 0xe053fd47, STC 0xe05e6295, type 1
XVD pts error PTS 0xe054044f, STC 0xe05e6618, type 1
XVD pts error PTS 0xe0540b57, STC 0xe05e699d, type 1
rap watchdog flush!
flush audio decode
video delay 0 (0 ms)
total video delay: 0 (0 ms)
ch0: lock
RAP first pts 0xe05eb216, stc 0xe05ea6ce, pcr valid
RAP sampling rate info isr
eModeChange Isr.. set source_changed_event!
audio sampling rate event handler ... NYI!
ch0: unlock
ch0: lock
RAP pts error 0 PTS 0xe0970e36, STC 0xe0c2c228, type 1
RAP pts error 0 PTS 0xe097126e, STC 0xe0c2c65c, type 1
RAP pts error 0 PTS 0xe09716a6, STC 0xe0c2ca93, type 1
RAP pts error 0 PTS 0xe0971ade, STC 0xe0c2cecb, type 1
XVD pts error PTS 0xe09739c7, STC 0xe0c2d3de, type 1
XVD pts error PTS 0xe09740cf, STC 0xe0c2de67, type 1
XVD pts error PTS 0xe0974edf, STC 0xe0c2e1f0, type 1
XVD pts error PTS 0xe09755e7, STC 0xe0c2ec77, type 1
XVD pts error PTS 0xe09763f7, STC 0xe0c2effe, type 1
XVD pts error PTS 0xe0976aff, STC 0xe0c2f709, type 1
XVD pts error PTS 0xe097790f, STC 0xe0c2fa89, type 1
rap watchdog flush!
flush audio decode
video delay 0 (0 ms)
total video delay: 0 (0 ms)
ch0: lock
XVD pts error PTS 0xe0978017, STC 0xe0c316a7, type 1
RAP first pts 0xe0c32796, stc 0xe0c31bb0, pcr valid
XVD pts error PTS 0xe0978e27, STC 0xe0c31db5, type 1
RAP sampling rate info isr
eModeChange Isr.. set source_changed_event!
audio sampling rate event handler ... NYI!
out of order segment: rcv_next 38BF225E seq 38BF22AE - 38BF22B6
ofo requeuing : rcv_next 38BF22AE seq 38BF22AE - 38BF22B6
stop pcr0 on dmx 0 pid:ff
stop video0 on dmx 0 pid:ff
VIDEO0: stop decode
VIDEO0: set blank to 1
audio: decoder stop
stop audio on dmx 0 pid:100
audio: xpt stop(3)
no decoder left in sync handling so disable xpt_sync
bcm_audio_channel_stop(3) done
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
set sb to 3(1)
disable wss on display 0
set wss 7 on display 1
tda: afc=0 (0 Hz)
start pcr0 on dmx 0 pid:ff index 7
start audio on dmx 0 pid:100
audio xpt start
sync is off so we enable it
demux-index 0 pcr0pid ff
using 7 as pcr0 pidchannel
MPEG
audio: decoder start 0
video delay 0 (0 ms)
total video delay: 0 (0 ms)
start video0 on dmx 0 pid:ff
total video delay: 0 (0 ms)
VIDEO0: start decode
tda: afc=1 (-13476 Hz)
ch0: lock
RAP first pts 0xa58f330, stc 0xa58e7d4, pcr valid
RAP sampling rate info isr
eModeChange Isr.. set source_changed_event!
audio sampling rate event handler ... NYI!
VIDEO0: first pts a59d2aa
VIDEO0: resolution changed (480 576)
VIDEO0: aspect changed 2
set current avs auto aspect to 16:9
set sb to 3(1)
disable wss on display 0
set wss 7 on display 1
enable tsm0
stop pcr0 on dmx 0 pid:ff
stop video0 on dmx 0 pid:ff
VIDEO0: stop decode
VIDEO0: set blank to 1
audio: decoder stop
stop audio on dmx 0 pid:100
audio: xpt stop(5)
no decoder left in sync handling so disable xpt_sync
bcm_audio_channel_stop(5) done
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
set sb to 3(1)
disable wss on display 0
set wss 7 on display 1
tda: afc=1 (-13476 Hz)
start pcr0 on dmx 0 pid:64b index 6
start audio on dmx 0 pid:64c
audio xpt start
sync is off so we enable it
demux-index 0 pcr0pid 64b
using 6 as pcr0 pidchannel
MPEG
audio: decoder start 0
video delay 0 (0 ms)
total video delay: 0 (0 ms)
start video0 on dmx 0 pid:64b
total video delay: 0 (0 ms)
VIDEO0: start decode
ch0: lock
tda: afc=1 (-13476 Hz)
RAP first pts 0x67ba6e76, stc 0x67ba6d98, pcr valid
RAP sampling rate info isr
eModeChange Isr.. set source_changed_event!
audio sampling rate event handler ... NYI!
VIDEO0: first pts 67bb227d
VIDEO0: resolution changed (704 576)
enable tsm0
out of order segment: rcv_next 38C04768 seq 38C04770 - 38C04778
ofo requeuing : rcv_next 38C04770 seq 38C04770 - 38C04778
root@dm800:~#