Übersicht: E-Sata Platten, die nicht funktionieren

  • Übersicht: E-Sata Platten, die nicht funktionieren

    Ich habe ein Iomega mdhd500-s Case mit einer ST3750640AS 3,5", die leider nicht mit dem Release, Unstable und mit dem aktuellen DMM-Image erkannt wird :o(

    Welche Platten werden bei Euch erkannt und nicht erkannt?

    Frohes Osterfest

    Quellcode

    1. --> brcm_pcibios_fixup_SATA
    2. PCI DEV in slot 0, ID=14e4:8602
    3. SATA: Primary Bus Master Status Register offset = b0520000 + 00000300 = b0520300
    4. SATA: before init Primary Bus Master Status reg = 0x00000000.
    5. SATA: after init Primary Bus Master Status reg = 0x00000020.
    6. SATA: Secondary Bus Master Status Register offset = b0520000 + 00000300 = b0520300
    7. SATA: before init Secondary Bus Master Status reg = 0x00000000.
    8. SATA: after init Secondary Bus Master Status reg = 0x00000060.
    9. PCI: Failed to allocate mem resource #6:20000@b0520000 for 0000:01:00.0
    10. TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
    11. ...
    12. Broadcom BCM7400B0 SATA2 IDE: IDE controller at PCI slot 0000:01:00.0
    13. Broadcom BCM7400B0 SATA2 IDE: chipset revision 0
    14. Broadcom BCM7400B0 SATA2 IDE: 100% native mode on irq 42
    15. ide0: BM-DMA at 0x0300-0x0307, BIOS settings: hda:DMA, hdb:pio
    16. ide1: BM-DMA at 0x0308-0x030f, BIOS settings: hdc:DMA, hdd:DMA
    Alles anzeigen

    Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von -=AS=- ()

  • Einen solchen Thread gibt es schon fuer das OE1.6, bitte die Platte dort eintragen und den Thread dort weiterfuehren.
    Kompatible Festplatten für OE1.6 (2.6.18)

    "Remember, if it's psychobilly, it's gotta have some rockabilly in it somwhere. It ain't just punk with a double bass." (P.Paul Fenech)

    Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von sparksofinsanity ()