Startparameter für scam
-k Pfad für keys-Verzeichnis
-s Pfad für scam-Verzeichnis
-v Info zur scam-Version
? Debug-Informationen
Beispiel: scam -k /usr/keys -s /usr/keys ?
Standardverzeichnisse der scam:
Die Standardverzeichnisse von scam wenn keine Parameter gesetzt worden sind sind
/var/keys #keys-Verzeichnis
/var/scam #scam-Verzeichnis
/usr/bin #für die scam selber (Dateirechte 755)
für normale zwecke wird keine config benötigt. man kann aber eine in var/keys erstellen
scam - config:
Dateiname = 'config'
sharing:
scam_to_scam
Server:
Client:
Anfragen auf bestimmte caid einschränken:
Beispiel:
Server hat die IP 192.168.0.100 und in der config steht
Client hat die IP 192.168.0.101 und in der config steht
Newcamd_to_scam
Beispiel:
newcs hat zb die IP 192.168.0.102 mit ORF Karte
Alles anzeigen
scam:
CCcam_to_Scam
Beispiel:
CCcam:
CCcam Server IP ist 192.168.0.103
C Line wird nicht gebraucht weil scam nicht zu CCcam sharen kann
scam:
*Timing-Anpassung
*PPS für via und cw disablen
*Priorität für ein Verschlüsselungssystem
*Anfragen auf bestimmte caid einschränken:
scam_to_gbox
/var/keys/config
*Serielle Kartenleser
Beispiel:
Datei: sc_cryptoworks
Datei: sc_nagravision
Alles anzeigen
Datei: nagra_boxkey
Alles anzeigen
-k Pfad für keys-Verzeichnis
-s Pfad für scam-Verzeichnis
-v Info zur scam-Version
? Debug-Informationen
Beispiel: scam -k /usr/keys -s /usr/keys ?
Standardverzeichnisse der scam:
Die Standardverzeichnisse von scam wenn keine Parameter gesetzt worden sind sind
/var/keys #keys-Verzeichnis
/var/scam #scam-Verzeichnis
/usr/bin #für die scam selber (Dateirechte 755)
für normale zwecke wird keine config benötigt. man kann aber eine in var/keys erstellen
scam - config:
Dateiname = 'config'
sharing:
scam_to_scam
Server:
Client:
Anfragen auf bestimmte caid einschränken:
Beispiel:
Server hat die IP 192.168.0.100 und in der config steht
Client hat die IP 192.168.0.101 und in der config steht
Newcamd_to_scam
Beispiel:
newcs hat zb die IP 192.168.0.102 mit ORF Karte
Quellcode
- <?xml version="1.0"?>
- <newCSconfig>
- <globals>
- <!-- valid value for listening-ip are:
- IPv4 adress of local interface.
- <listening-ip>127.0.0.1</listening-ip> -->
- </globals>
- <readers name="smargo">
- <device>
- <name>smargo</name>
- <type>phoenix</type>
- <mhz>368</mhz>
- <node>/dev/usb/tts/0</node>
- <parity>none</parity>
- <reset>normal</reset>
- <export>Yes</export>
- <enabled>Yes</enabled>
- <blocksa>No</blocksa>
- <blockua>No</blockua>
- <blockga>No</blockga>
- <blockC0>No</blockC0>
- <blockc0>No</blockc0>
- <crypto-special>Yes</crypto-special>
- <PTShandshake>Yes</PTShandshake>
- <carddetect>Yes</carddetect>
- <newcamd_port>9500</newcamd_port>
- <autosid>Yes</autosid>
- <Seca-PPV>no</Seca-PPV>
- <priority>round</priority>
- </device>
- </readers>
- <cache>
- <emm>20</emm>
- <ecm>-1</ecm>
- </cache
- <newcamdserver>
- <enabled>Yes</enabled>
- <name>newcs</name>
- <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14 0 0</deskey>
- <user>
- <name>dm800</name>
- <password>mypass</password>
- <au>on</au>
- <spider>No</spider>
- <rate>1</rate>
- <cardlevel>1</cardlevel>
- </user>
- </newcamdserver>
- </newCSconfig>
scam:
CCcam_to_Scam
Beispiel:
CCcam:
CCcam Server IP ist 192.168.0.103
C Line wird nicht gebraucht weil scam nicht zu CCcam sharen kann
scam:
*Timing-Anpassung
*PPS für via und cw disablen
*Priorität für ein Verschlüsselungssystem
*Anfragen auf bestimmte caid einschränken:
scam_to_gbox
/var/keys/config
*Serielle Kartenleser
Brainfuck-Quellcode
- ### serial port smartcard readers
- # device node
- # /sc/serial/<name>/device=<string>
- # <>e.g.: /dev/ttyUSB0
- # type
- # /sc/serial/<name>/type=<string>><><><><>[default: phoenix]
- # <>valid types: mastercrd2, phoenix, smartreader+
- # clock frequency in Hz
- # /sc/serial/<name>/fs=<num><><><><><>[default: 3571200]
- # z.b.
Beispiel:
Datei: sc_cryptoworks
Datei: sc_nagravision
Quellcode
- #Config Optionen für Nagra-Karten ohne DT08:
- # D: { AAAA BBBBBBBB { CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC }}
- #
- # Compressed P and Q, DT06 with key ID 0x0d, used to calculate N
- # +++ only needed for cards without DT08 +++
- # A = System Type
- # B = Card Serial
- # C = Key (24 bytes)
- # N: { AAAA BBBBBBBB { CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC }}
- #
- # RSA modulus used for session key negotiation, equal to decrypted DT08; SK of Secondary Key
- # +++ only needed for cards without DT08 +++
- # A = System Type
- # B = Card Serial
- # C = Modulus (64 bytes)
Datei: nagra_boxkey
Quellcode
- # Boxkey
- # B: { AAAA BBBBBBBB { CCCCCCCCCCCCCCCC }}
- # A = System Type
- # B = Card Serial
- # C = Key (8 bytes)
- #
- #
- # Shared RSA modulus
- # S: { AAAA BBBBBBBB { CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC }}
- # A = System Type
- # B = Card Serial
- # C = Modulus (64 bytes)
- #
- # Unique RSA modulus
- # U: { AAAA BBBBBBBB { CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC }}
- # A = System Type
- # B = Card Serial
- # C = Modulus (64 bytes)
Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von =sven= ()