DM8000 Wont boot anymore after update to 3.1.2

    • DM8000 Wont boot anymore after update to 3.1.2

      Hello,

      I have done a update to 3.1.2 this directly from the dreambox so i came from 3.1.1.

      A few hours after the update the box was blocked. The only solution was power off and on again.

      Now it is not possiblem anymore to get it started. the yellow bar in the display stays at +-40%?
      On the screen of the TV there is the standard startup screen .

      But this is locked again.

      ALready tried to power of and on again. Same result.

      Any ideas before i reprogram it with from the PC.

      Before 3.1.1 the system never locks up . So i am 100% sure that it has something to do with e the upgrda 3.1.2.

      Thanks

      DCA

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von didiercauberghe ()

    • Originally posted by didiercauberghe
      Thanks, can you give me suggestions how i do this ?

      I have always done it with dreamup.
      thanks.

      Dca



      From a windows "cmd" prompt:
      "telnet <BOXIP>"

      If you have a password set (which is preferred) you could also (and should) use "SSH". From Linux you run "ssh root@<BOXIP>". From windows u could use putty or any other tool with ssh support.

      After logging in, run the suggested commands.


      /Peo