USB DTT stick on dm800se

    • reinsert usb stick and `dmesg| grep -i dvb`

      also check does /dev/dvb/adapter1 come and frontend0 present in it
      dm7080sstt; 2x dm8000sstt; dm7020s <- Diseq1x4 <- 3x Diseq1x10 <-
      Dishes:
      1.8m 36E;28E;23E;19E;16E;13E;7E
      1.6m 42E;36E
      1.0m 10/9E;5E;1W;8W
      1.0m 15W;22W;30W
      1.1m 4/5W;12W;18W;24W
      1.1m 53E;60E
      1.0m 75E
      TVs: Philips 46pfl9707s; Philips 42pfl9703h

    • Ok, after installing all packages now the dvb-t tuner has magically appeared!

      Quellcode

      1. *****************************
      2. * http://www.newnigma2.to *
      3. *****************************
      4. * the next step is done *
      5. *****************************
      6. OpenDreambox
      7. dm800se login: root
      8. Password:
      9. root@dm800se:~# dmesg | grep -i "dvb"
      10. [4294687.908000] DVB: registering new adapter (BCM7405)
      11. [4294688.054000] Initializing adapter 0 (BCM4505-DVB-S2)
      12. [4294690.091000] DVB: registering adapter 0 frontend 0 (bcm4506)...
      13. [4294695.389000] dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will t
      14. ry to load a firmware
      15. [4294695.430000] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.f
      16. w'
      17. [4294696.138000] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
      18. [4294696.148000] dvb-usb: will pass the complete MPEG2 transport stream to the s
      19. oftware demuxer.
      20. [4294696.153000] DVB: registering new adapter (Hauppauge Nova-T Stick)
      21. [4294696.382000] DVB: registering adapter 1 frontend 0 (DiBcom 7000PC)...
      22. [4294696.592000] input: IR-receiver inside an USB DVB receiver as /class/input/i
      23. nput5
      24. [4294696.595000] dvb-usb: schedule remote query interval to 50 msecs.
      25. [4294696.596000] dvb-usb: Hauppauge Nova-T Stick successfully initialized and co
      26. nnected.
      27. [4294696.598000] usbcore: registered new driver dvb_usb_dib0700
      28. [4294702.149000] 200 ms: 38 Starting /etc/rcS.d/S85dvbusb...
      29. [4294702.895000] DVB: registering adapter 0 frontend 0 (virtual DVB-S)...
      30. [4294702.927000] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
      31. [4294727.958000] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
      32. [4294728.155000] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
      33. root@dm800se:~#
      Alles anzeigen


      Now the last question to solve: during theese tests I installed both USBTunerBIN and extuner. Now with "ps" I see extuner running. Must I uninstall something? Do they make conflict with each other?

    • Original von oZxS
      restart gui and take a look in the tunermenu

      ls -all /dev/dvb/

      can u post me this output?


      Here you are:

      Quellcode

      1. *****************************
      2. * http://www.newnigma2.to *
      3. *****************************
      4. * the next step is done *
      5. *****************************
      6. OpenDreambox
      7. dm800se login: root
      8. Password:
      9. root@dm800se:~# ls -all /dev/dvb
      10. drwxr-xr-x 4 root root 80 Dec 30 14:48 .
      11. drwxr-xr-x 15 root root 2760 Dec 30 14:48 ..
      12. drwxr-xr-x 2 root root 360 Dec 30 14:48 adapter0
      13. drwxr-xr-x 2 root root 120 Dec 30 14:48 adapter1
      14. root@dm800se:~#
      Alles anzeigen

    • Original von oZxS
      ls -all /dev/dvb/adapter1/

      pls post me this output


      root@dm800se:~# ls -all /dev/dvb/adapter1
      drwxr-xr-x 2 root root 120 Dec 30 14:48 .
      drwxr-xr-x 4 root root 80 Dec 30 14:48 ..
      crw-rw---- 1 root video 212, 15 Dec 30 14:48 demux0
      crw-rw---- 1 root video 212, 16 Dec 30 14:48 dvr0
      crw-rw---- 1 root video 212, 18 Dec 30 14:48 frontend0
      crw-rw---- 1 root video 212, 17 Dec 30 14:48 net0
      root@dm800se:~#

    • I see:
      TUNER A: BCM4505 (DVB-S2)
      Single
      Satellites: Hot Bird 13.0E

      TUNER B: Nova-T Stick (DVB-T)
      Enabled



      I did dtt channels search and all works well.
      If I install only drivers in nn2 feed (v4 and not v47) it doesn't work.

      @MartiniB
      How the usbtuner pack can be used? How to start service once installed?
      Why, according to you, it's better than extuner?

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von zoltan ()

    • Hi zoltan,

      could you please tell me, which stick is it:

      hauppauge.de/de/site/products/data_novatstick.html

      or

      hauppauge.fr/site/products/data_novathdstick.html

      Because in germany we don't have (and will never have) HDTV over the air. So I guess this stick will never be sold in Germany (except some online stores for a very high price).

      Chris

    • Originally posted by bluemoon2510
      Hi zoltan,

      could you please tell me, which stick is it:

      hauppauge.de/de/site/products/data_novatstick.html

      or

      hauppauge.fr/site/products/data_novathdstick.html

      Because in germany we don't have (and will never have) HDTV over the air. So I guess this stick will never be sold in Germany (except some online stores for a very high price).

      Chris


      Mine is the second one, but the only difference between them is the included CD with software. You can buy the first and it will work for sure!!
      Bye

    • Got me a Hauppage NOVA-T stick also, and i had the same problem.
      Been trying to find out what the problem was all day...

      After a lot of re-flashes and reboots i made some progress.
      In witch order the packages are installed seems to be crucial!
      I finally composed a line that you can use in telnet :

      opkg install v4l-dvb-module-dib0090 v4l-dvb-module-dib7000m v4l-dvb-module-dib0070 v4l-dvb-module-dib8000 v4l-dvb-module-dib3000mc v4l-dvb-module-dibx000-common v4l-dvb-module-dib7000p v4l-dvb-firmware-dvb-usb-dib0700-1.20 v4l-dvb-module-dvb-usb-dib0700 v4l-dvb-module-dvb-usb v4l-dvb-module-dvb-core extuner

      Execute it, and after a reboot the stick is working.! :D
      (Also all those packs seem to be necessary to get the stick to work.)

      I'm using a Hauppage NOVA-T stick model 294 on a DM500HD with Newnigma 3.14.

      However i noted that the installed packs are "R4", and when i look at the Sifteam feed i see "R55".
      addons.enigma2.sifteam.eu/drea…e/dm500hd/Packages.stamps
      Those are the versions right.? (my Linux knowledge is very limited) is there a possibility to update your feed to those newer versions.?

      Now i just have scanned the DVB-T channels, and see the channels give 0% SNR in the infobar, but AGC is working correct. (See screenshot)
      The rest seems to work fine, just that i see the "turning wheels" blinking the first second i switch a channel. (have a feeling it has something to do with the EPG?)

      Anyway, hope this info helps someone that is planning the same. 8)
      Bilder

      • tuners.jpg

        109,9 kB, 1.009×582, 2.257 mal angesehen

      • installatie.jpg

        384,36 kB, 666×958, 2.331 mal angesehen

      • signaal.jpg

        115,04 kB, 1.000×586, 2.215 mal angesehen

      • tehcnisat.jpg

        91,42 kB, 680×342, 2.276 mal angesehen

    • Originally posted by neo_atomic
      I finally composed a line that you can use in telnet :

      opkg install v4l-dvb-module-dib0090 v4l-dvb-module-dib7000m v4l-dvb-module-dib0070 v4l-dvb-module-dib8000 v4l-dvb-module-dib3000mc v4l-dvb-module-dibx000-common v4l-dvb-module-dib7000p v4l-dvb-firmware-dvb-usb-dib0700-1.20 v4l-dvb-module-dvb-usb-dib0700 v4l-dvb-module-dvb-usb v4l-dvb-module-dvb-core extuner

      Execute it, and after a reboot the stick is working.! :D
      (Also all those packs seem to be necessary to get the stick to work.)


      It is necessary because the "-r4" driver included in newnigma feed hasn't the correct dependencies as the "-r55" sifteam one has.


      However i noted that the installed packs are "R4", and when i look at the Sifteam feed i see "R55".
      addons.enigma2.sifteam.eu/drea…e/dm500hd/Packages.stamps


      As said before, it would be useful to update newnigma feed to the newer driver versions...how much time it need?

    • ok sorry, but 'I inform you that I failed to install, I downloaded all the drivers but nothing, is there any procedure for the Hauppage win tv nova hd?
      I would not give up on this beautiful and too newnigma2
      You can hope that the new versions the key is recognized by yourself?

    • Original von neo_atomic
      Got me a Hauppage NOVA-T stick also, and i had the same problem.
      Been trying to find out what the problem was all day...

      After a lot of re-flashes and reboots i made some progress.
      In witch order the packages are installed seems to be crucial!
      I finally composed a line that you can use in telnet :

      opkg install v4l-dvb-module-dib0090 v4l-dvb-module-dib7000m v4l-dvb-module-dib0070 v4l-dvb-module-dib8000 v4l-dvb-module-dib3000mc v4l-dvb-module-dibx000-common v4l-dvb-module-dib7000p v4l-dvb-firmware-dvb-usb-dib0700-1.20 v4l-dvb-module-dvb-usb-dib0700 v4l-dvb-module-dvb-usb v4l-dvb-module-dvb-core extuner

      Execute it, and after a reboot the stick is working.! :D
      (Also all those packs seem to be necessary to get the stick to work.)

      I'm using a Hauppage NOVA-T stick model 294 on a DM500HD with Newnigma 3.14.

      However i noted that the installed packs are "R4", and when i look at the Sifteam feed i see "R55".
      addons.enigma2.sifteam.eu/drea…e/dm500hd/Packages.stamps
      Those are the versions right.? (my Linux knowledge is very limited) is there a possibility to update your feed to those newer versions.?

      Now i just have scanned the DVB-T channels, and see the channels give 0% SNR in the infobar, but AGC is working correct. (See screenshot)
      The rest seems to work fine, just that i see the "turning wheels" blinking the first second i switch a channel. (have a feeling it has something to do with the EPG?)

      Anyway, hope this info helps someone that is planning the same. 8)

      Thanks to you I solved, I used your telnet command, thanks again