kleine Frage vor dem Umstieg

    • kleine Frage vor dem Umstieg

      Hallo Leute,

      ich möchte gern von Gemini zu Newnigma wechseln mit meiner DM8000, dabei habe ich aber eine Frage zu den aufgenommen Filmen auf der Festplatte.
      Wenn ich das Image neu flashe passiert ja erstmal nix mit der Festplatte, nur wenn ich die Festplatte benutzen will muss ich diese doch neu initialisieren!?!
      Damit sind doch alle meine Aufnahmen weg oder liege ich da falsch?

      Danke euch.

      Gruß the-grosser

    • Es passiert nichts und du musst auch nicht neu initialisieren.

      Beim Flashen eines neuen Images gehen keine Daten auf der Festplatte verloren. Ich habe das bestimmt schon mehr als 50 Mal gemacht und die Filme sind immer noch da.
      Gruß

      lapidis

    • Hm,

      kurios!?! Ich hatte vergangene Woche schon einmal das Newenigma geflasht, dann ist mir das ganze Image bei starten des Satfinders so abgeschmiert das nix mehr ging. Vorher hatte ich nach der Festplatte geschaut bzw. nach den Aufnahmen die da draufliegen, diese wurden mir aber nicht angezeigt.

      Woran kann das liegen?

    • Mhm ..
      naja in dem Thread steht ja auch welche Informationen ich benötige.
      Spuckt blkid denn auch /dev/sda aus ?

      Dann editieren mal die /etc/fstab
      Da gibt es eine Zeile wo am Anfang /dev/sda1 steht, mache mal die 1 weg so das /dev/sda da steht und starte neu.

    • würde dir aber raten, die Aufnahmen zu sichern und die Platte richtig zu initialisieren, d.h. eine korrekte Partitionstabelle

      ewig kann man nicht auf dem raw-device rummurksen - irgendwann geht nix mehr. dann hilft dann wirklich nur noch initialisieren. Und wenn du deine Daten nicht gesichert hast ....
      Gruß Fred

      Die Dreambox ist tot, es lebe die Dreambox

      ¯\_(ツ)_/¯

      Quellcode

      1. root@dm920:~$ mount | grep "/ "
      2. /dev/mmcblk1p1 on / type ext4 (rw,relatime,data=ordered)
      3. root@dm920:~$

    • Original von Fred Bogus Trumper
      würde dir aber raten, die Aufnahmen zu sichern und die Platte richtig zu initialisieren, d.h. eine korrekte Partitionstabelle

      ewig kann man nicht auf dem raw-device rummurksen - irgendwann geht nix mehr. dann hilft dann wirklich nur noch initialisieren. Und wenn du deine Daten nicht gesichert hast ....


      Hallo Fred,

      hab mir mal deinen Tipp zu Herzen genommen und wollte die Platte richtig initialisieren!
      Leider kommt schon nach kurzer Zeit eine Fehlermeldung mit mkfs failed.....

      Was kann ich da machen????

    • Also, hab die Befehle über Telnet ausgeführt, dann ist die Box gecrasht....

      Danach habe ich versucht über die GUI die Platte zu intialisieren, bleibt bei mfks failed

      Hier mal der Auszug vom putty wenn es was bringt...

      Quellcode

      1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2011.01.24 18:47:39 =~=~=~=~=~=~=~=~=~=~=~=
      4. *****************************
      6. * http://www.newnigma2.to *
      8. *****************************
      10. * the next step is done *
      12. *****************************
      14. OpenDreambox
      16. dm8000 login: root
      17. root@dm8000:~# init 4
      18. root@dm8000:~# enigma2
      19. setenv('prefix', '/usr', 0)
      20. setenv('exec_prefix', '/usr', 0)
      21. setenv('bindir', '/usr/bin', 0)
      22. setenv('sbindir', '/usr/sbin', 0)
      23. setenv('libexecdir', '/usr/libexec', 0)
      24. setenv('datarootdir', '${prefix}/share', 0)
      25. setenv('datadir', '/usr/share', 0)
      26. setenv('sysconfdir', '/etc', 0)
      27. setenv('sharedstatedir', '/com', 0)
      28. setenv('localstatedir', '/var', 0)
      29. setenv('libdir', '/usr/lib', 0)
      30. setenv('localedir', '${datarootdir}/locale', 0)
      31. setenv('prefix', '/usr', 1)
      32. setenv('exec_prefix', '/usr', 1)
      33. setenv('bindir', '/usr/bin', 1)
      34. setenv('sbindir', '/usr/sbin', 1)
      35. setenv('libexecdir', '/usr/libexec', 1)
      36. setenv('datarootdir', '/usr/share', 1)
      37. setenv('datadir', '/usr/share', 1)
      38. setenv('sysconfdir', '/etc', 1)
      39. setenv('sharedstatedir', '/com', 1)
      40. setenv('localstatedir', '/var', 1)
      41. setenv('libdir', '/usr/lib', 1)
      42. setenv('localedir', '/usr/share/locale', 1)
      43. resolve: resolve ${datadir}/enigma2/encoding.conf
      44. resolve: -> /usr/share/enigma2/encoding.conf
      45. resolve: resolve ${libdir}/enigma2/python
      46. resolve: -> /usr/lib/enigma2/python
      47. PYTHONPATH: /usr/lib/enigma2/python
      48. + (1) Background File Eraser
      49. + (8) graphics acceleration manager
      50. + (9) GFBDC
      51. 16384k video mem
      52. - double buffering available!
      53. 13144kB available for acceleration surfaces.
      54. resolution: 720 x 576 x 32 (stride: 2880)
      55. + (9) gLCDDC
      56. found OLED display!
      57. lcd buffer 0x6b5958 8448 bytes, stride 132
      58. + (9) Font Render Class
      59. [FONT] initializing lib...
      60. [FONT] loading fonts...
      61. [FONT] Intializing font cache, using max. 4MB...
      62. + (10) gRC
      63. RC thread created successfully
      64. + (15) eWindowStyleManager
      65. + (20) DVB-CI UI
      66. + (20) UHF Modulator
      67. couldnt open /dev/rfmod0!!!!
      68. + (20) RC Input layer
      69. + (20) misc options
      70. + (20) AVSwitch Driver
      71. + (21) input device driver
      72. Input device "dreambox remote control (native)" is not a keyboard.
      73. Input device "dreambox advanced remote control (native)" is not a keyboard.
      74. Input device "dreambox ir keyboard" is a keyboard.
      75. Input device "dreambox ir mouse" is not a keyboard.
      76. Input device "dreambox front panel" is not a keyboard.
      77. Found 5 input devices!
      78. + (21) Console RC Driver
      79. failed to open /dev/vc/0
      80. + (30) eActionMap
      81. + (35) CI Slots
      82. scanning for common interfaces..
      83. CI Slot 0 setSource(0)
      84. CI Slot 1 setSource(0)
      85. CI Slot 2 setSource(0)
      86. CI Slot 3 setSource(0)
      87. eDVBCIInterfaces->setInputSource(0, 0)
      88. eDVBCIInterfaces->setInputSource(1, 1)
      89. eDVBCIInterfaces->setInputSource(2, 2)
      90. eDVBCIInterfaces->setInputSource(3, 3)
      91. done, found 4 common interface slots
      92. + (40) eServiceCenter
      93. settings instance.
      94. + (41) eServiceFactoryM2TS
      95. + (41) eServiceFactoryMP3
      96. + (41) eServiceFactoryFS
      97. + (41) eServiceFactoryDVB
      98. reached rl 70
      99. resolve: resolve ${sysconfdir}/enigma2/lamedb
      100. resolve: -> /etc/enigma2/lamedb
      101. ---- opening lame channel db
      102. reading services (version 4)
      103. loaded 1499 services
      104. scanning for frontends..
      105. opening frontend 0
      106. detected satellite frontend
      107. close frontend 0
      108. opening frontend 1
      109. detected satellite frontend
      110. close frontend 1
      111. found 1 adapter, 2 frontends(2 sim) and 5 demux, boxtype 4
      112. Use valid Linux Time :) (RTC?)
      113. [EPGC] Initialized EPGCache (wait for setCacheFile call now)
      114. resolve: resolve ${datadir}/enigma2/skin_default/pal.png
      115. resolve: -> /usr/share/enigma2/skin_default/pal.png
      116. Loading spinners...
      117. resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait1.png
      118. resolve: -> /usr/share/enigma2/skin_default/spinner/wait1.png
      119. resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait2.png
      120. resolve: -> /usr/share/enigma2/skin_default/spinner/wait2.png
      121. resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait3.png
      122. resolve: -> /usr/share/enigma2/skin_default/spinner/wait3.png
      123. resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait4.png
      124. resolve: -> /usr/share/enigma2/skin_default/spinner/wait4.png
      125. resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait5.png
      126. resolve: -> /usr/share/enigma2/skin_default/spinner/wait5.png
      127. resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait6.png
      128. resolve: -> /usr/share/enigma2/skin_default/spinner/wait6.png
      129. resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait7.png
      130. resolve: -> /usr/share/enigma2/skin_default/spinner/wait7.png
      131. found 6 spinner!
      133. executing main
      134. setIoPrio best-effort level 3 ok
      135. resolve: resolve ${libdir}/enigma2/python/mytest.py
      136. resolve: -> /usr/lib/enigma2/python/mytest.py
      137. resolve: resolve ${sysconfdir}/
      138. resolve: -> /etc/
      139. resolve: resolve ${sysconfdir}/
      140. resolve: -> /etc/
      141. resolve: resolve ${datadir}/fonts/
      142. resolve: -> /usr/share/fonts/
      143. resolve: resolve ${sysconfdir}/enigma2/
      144. resolve: -> /etc/enigma2/
      145. resolve: resolve ${libdir}/enigma2/python/Plugins/
      146. resolve: -> /usr/lib/enigma2/python/Plugins/
      147. resolve: resolve ${datadir}/enigma2/po/
      148. resolve: -> /usr/share/enigma2/po/
      149. resolve: resolve ${datadir}/enigma2/
      150. resolve: -> /usr/share/enigma2/
      151. resolve: resolve ${datadir}/enigma2/
      152. resolve: -> /usr/share/enigma2/
      153. resolve: resolve ${sysconfdir}/enigma2/playlist/
      154. resolve: -> /etc/enigma2/playlist/
      155. resolve: resolve ${datadir}/enigma2/defaults/
      156. resolve: -> /usr/share/enigma2/defaults/
      157. resolve: resolve ${datadir}/enigma2/dealer
      158. resolve: -> /usr/share/enigma2/dealer
      159. resolve: resolve ${datadir}/meta
      160. resolve: -> /usr/share/meta
      161. resolve: resolve ${datadir}/enigma2/defaults/
      162. resolve: -> /usr/share/enigma2/defaults/
      163. /proc/stb/frontend/0/lnb_sense is 0
      165. enumerating block devices...
      166. found block device 'sdb': ok, removable=True, cdrom=False, partitions=['sdb1']
      167. found block device 'sdb1': error querying properties
      168. found block device 'mtdblock6': blacklisted
      169. found block device 'mtdblock5': blacklisted
      170. found block device 'mtdblock4': blacklisted
      171. found block device 'mtdblock3': blacklisted
      172. found block device 'mtdblock2': blacklisted
      173. found block device 'mtdblock1': blacklisted
      174. found block device 'mtdblock0': blacklisted
      175. found block device 'sda': ok, removable=False, cdrom=False, partitions=[]
      176. new Harddisk sda -> /dev/sda -> /dev/sda
      177. [ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sda')
      178. not loading user skin: [Errno 2] No such file or directory: '/etc/enigma2/skin_user.xml'
      179. main thread is non-idle! display spinner!
      180. Preferred tag editor set to None
      181. Reading satellites.xml
      182. resolve: resolve ${datadir}/enigma2/unicable.xml
      183. resolve: -> /usr/share/enigma2/unicable.xml
      184. removing internal link on frontend id 1
      185. sec config cleared
      186. setSlotInfo for dvb frontend 0 to slotid 0, descr BCM4506 (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
      187. setSlotInfo for dvb frontend 1 to slotid 1, descr BCM4506 (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
      188. slot: 0 configmode: simple
      189. diseqcmode: diseqc_a_b
      190. slot: 1 configmode: simple
      191. diseqcmode: diseqc_a_b
      192. sec config completed
      193. resolve: resolve ${datadir}/enigma2/setup.xml
      194. resolve: -> /usr/share/enigma2/setup.xml
      195. resolve: resolve ${sysconfdir}/enigma2/
      196. resolve: -> /etc/enigma2/
      197. loading bouquet... /etc/enigma2/bouquets.tv
      198. resolve: resolve ${sysconfdir}/enigma2/
      199. resolve: -> /etc/enigma2/
      200. loading bouquet... /etc/enigma2/userbouquet.favourites.tv
      201. 132 entries in Bouquet userbouquet.favourites.tv
      202. resolve: resolve ${sysconfdir}/enigma2/
      203. resolve: -> /etc/enigma2/
      204. loading bouquet... /etc/enigma2/userbouquet.sky__tv_.tv
      205. 60 entries in Bouquet userbouquet.sky__tv_.tv
      206. resolve: resolve ${sysconfdir}/enigma2/
      207. resolve: -> /etc/enigma2/
      208. loading bouquet... /etc/enigma2/userbouquet.favourites_hd.tv
      209. 21 entries in Bouquet userbouquet.favourites_hd.tv
      210. resolve: resolve ${sysconfdir}/enigma2/
      211. resolve: -> /etc/enigma2/
      212. loading bouquet... /etc/enigma2/userbouquet.orf__tv_.tv
      213. 16 entries in Bouquet userbouquet.orf__tv_.tv
      214. 4 entries in Bouquet bouquets.tv
      215. resolve: resolve ${sysconfdir}/enigma2/
      216. resolve: -> /etc/enigma2/
      217. loading bouquet... /etc/enigma2/bouquets.radio
      218. resolve: resolve ${sysconfdir}/enigma2/
      219. resolve: -> /etc/enigma2/
      220. loading bouquet... /etc/enigma2/userbouquet.favourites.radio
      221. 9 entries in Bouquet userbouquet.favourites.radio
      222. resolve: resolve ${sysconfdir}/enigma2/
      223. resolve: -> /etc/enigma2/
      224. loading bouquet... /etc/enigma2/userbouquet.sky__radio_.radio
      225. 7 entries in Bouquet userbouquet.sky__radio_.radio
      226. 2 entries in Bouquet bouquets.radio
      227. [eDVBLocalTimeHandler] enable sync local time with transponder time!
      228. main thread is non-idle! display spinner!
      229. /usr/lib/python2.6/site-packages/twisted/internet/_sslverify.py:5: DeprecationWarning: the md5 module is deprecated; use hashlib instead
      230. import itertools, md5
      231. add dreampackage scanner plugin
      232. added
      233. [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Display)
      234. - double buffering available!
      235. 9184kB available for acceleration surfaces.
      236. resolution: 1280 x 720 x 32 (stride: 5120)
      237. [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
      238. [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
      239. [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
      240. [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
      241. --> setting scaler_sharpness to: 0000000D
      242. couldn't open /proc/stb/misc/12V_output
      243. resolve: resolve ${datadir}/enigma2/keymap.xml
      244. resolve: -> /usr/share/enigma2/keymap.xml
      245. [ePopen] command: ip -o addr
      246. [ePopen] command: ip -o addr
      247. setLCDBrightness 25
      248. setLCDBrightness 127
      249. resolve: resolve ${datadir}/keymaps/
      250. resolve: -> /usr/share/keymaps/
      251. resolve: resolve ${datadir}/keymaps/
      252. resolve: -> /usr/share/keymaps/
      253. resolve: resolve ${datadir}/keymaps/
      254. resolve: -> /usr/share/keymaps/
      255. Activating keymap: Dreambox Keyboard Deutsch
      256. resolve: resolve ${datadir}/keymaps/
      257. resolve: -> /usr/share/keymaps/
      258. [ePopen] command: loadkmap < /usr/share/keymaps/dream-de.kmap
      259. Activating language German
      260. language set to de_DE
      261. /usr/lib/enigma2/python/Plugins/Extensions/WebInterface/__init__.py:4: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
      262. import os, gettext, sha
      263. [WebInterface] set language to de
      264. [WebInterface] set language to de
      265. [WebInterface] fallback to default translation for Webinterface
      266. [AudioSync] set language to de
      267. [AudioSync] set language to de
      268. resolve: resolve ${libdir}/enigma2/python/Plugins/SystemPlugins/WirelessLan
      269. resolve: -> /usr/lib/enigma2/python/Plugins/SystemPlugins/WirelessLan
      270. getModeList for port DVI-PC
      271. getModeList for port YPbPr
      272. getModeList for port Scart
      273. getModeList for port DVI-PC
      274. getModeList for port DVI
      275. hotplug on dvi
      276. -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
      277. -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
      278. -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
      279. -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
      280. setMode - port: DVI mode: 1080i rate: multi
      281. -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
      282. resolve: resolve ${datadir}/enigma2/
      283. resolve: -> /usr/share/enigma2/
      284. /usr/lib/python2.6/site-packages/twisted/mail/smtp.py:10: DeprecationWarning: the MimeWriter module is deprecated; use the email package instead
      285. import MimeWriter, tempfile, rfc822
      286. --> setting contrast to: 00008000
      287. --> setting saturation to: 00008000
      288. --> setting hue to: 00008000
      289. --> setting brightness to: 00008000
      290. --> setting block_noise_reduction to: 00000000
      291. --> setting mosquito_noise_reduction to: 00000000
      292. --> setting digital_contour_removal to: 00000000
      293. --> setting splitmode to: off
      294. --> setting sharpness to: 00000000
      295. --> setting auto_flesh to: 00000000
      296. --> setting green_boost to: 00000000
      297. --> setting blue_boost to: 00000000
      298. --> setting dynamic_contrast to: 00000000
      299. --> applying pep values
      300. [NetworkBrowser] set language to de
      301. [NetworkBrowser] set language to de
      302. [NetworkBrowser] fallback to default translation for NetworkBrowser
      303. [NetworkBrowser] fallback to default translation for Search for network shares
      304. [NetworkBrowser] fallback to default translation for MountManager
      305. [NetworkBrowser] fallback to default translation for Manage network shares
      306. [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (LCD_NN)
      307. [eCamdCtrl] starting cmd 5
      308. [eCamdCtrl] executing /usr/bin/camdctrl current
      309. starting hotplug handler
      310. add device sdb to bdpoll current state: medium inserted
      311. [CrashlogAutoSubmit] - autostart
      312. [CI_Assignment] activating ci configs:
      313. [CI_Activate] FOUND 4 CI Slots
      314. resolve: resolve ${sysconfdir}/enigma2/ci
      315. resolve: -> /etc/enigma2/ci
      316. [CI_Activate_Config_CI0] no config file found
      317. [CI_Activate_Config_CI0] error parsing xml...
      318. resolve: resolve ${sysconfdir}/enigma2/ci
      319. resolve: -> /etc/enigma2/ci
      320. [CI_Activate_Config_CI1] no config file found
      321. [CI_Activate_Config_CI1] error parsing xml...
      322. resolve: resolve ${sysconfdir}/enigma2/ci
      323. resolve: -> /etc/enigma2/ci
      324. [CI_Activate_Config_CI2] no config file found
      325. [CI_Activate_Config_CI2] error parsing xml...
      326. resolve: resolve ${sysconfdir}/enigma2/ci
      327. resolve: -> /etc/enigma2/ci
      328. [CI_Activate_Config_CI3] no config file found
      329. [CI_Activate_Config_CI3] error parsing xml...
      330. It's now Mon Jan 24 18:48:09 2011
      331. [timer.py] next activation: 1295891389 (in 99168 ms)
      332. It's now Mon Jan 24 18:48:09 2011
      333. [timer.py] next activation: 1295891389 (in 99144 ms)
      334. Looking for embedded skin
      335. Looking for embedded skin
      336. port changed to DVI
      337. mode changed to 1080i
      338. getModeList for port DVI
      339. default ('1080i', 'default')
      340. preferedmodes ['720p', '576p', '480p', '576i', '480i', ('1080i', 'default')]
      341. [CrashlogAutoSubmit] - autostart
      342. [CrashlogAutoSubmit] - getMailExchange
      343. No skin to read...
      344. [InstallerUpdateCheck] timer changed
      345. [InstallerUpdateCheck] next check at Mon Jan 31 18:48:11 2011
      346. [InstallerUpdateCheck] Check...
      347. Looking for embedded skin
      348. [EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
      349. [EPGC] time updated.. start EPG Mainloop
      350. before: 1
      351. after: 1
      352. not showing fine-tuning wizard, config variable doesn't exist
      353. showtestcard is false
      354. Looking for embedded skin
      355. setValue 100
      356. cannot open /proc/stb/audio/j1_mute(No such file or directory)
      357. Setvolume: 100 100 (raw)
      358. Setvolume: 0 0 (-1db)
      359. Setvolume: 100 100 (raw)
      360. Setvolume: 0 0 (-1db)
      361. nr_read 61809 nr_write 18229
      362. sum 80038 prev_sum 0
      363. hdd was accessed since previous check!
      364. [IDLE] 0 60 False
      365. allocating new converter!
      366. allocating new converter!
      367. allocating new converter!
      368. allocating new converter!
      369. allocating new converter!
      370. allocating new converter!
      371. allocating new converter!
      372. allocating new converter!
      373. allocating new converter!
      374. RemovePopup, id = ZapError
      375. allocating new converter!
      376. allocating new converter!
      377. allocating new converter!
      378. allocating new converter!
      379. allocating new converter!
      380. allocating new converter!
      381. allocating new converter!
      382. allocating new converter!
      383. allocating new converter!
      384. allocating new converter!
      385. allocating new converter!
      386. allocating new converter!
      387. allocating new converter!
      388. allocating new converter!
      389. allocating new converter!
      390. allocating new converter!
      391. allocating new converter!
      392. allocating new converter!
      393. allocating new converter!
      394. allocating new converter!
      395. allocating new converter!
      396. allocating new converter!
      397. allocating new converter!
      398. allocating new converter!
      399. allocating new converter!
      400. allocating new converter!
      401. allocating new converter!
      402. allocating new converter!
      403. allocating new converter!
      404. allocating new converter!
      405. allocating new converter!
      406. allocating new converter!
      407. allocating new converter!
      408. allocating new converter!
      409. allocating new converter!
      410. allocating new converter!
      411. allocating new converter!
      412. reused converter!
      413. allocating new converter!
      414. allocating new converter!
      415. reused converter!
      416. allocating new converter!
      417. allocating new converter!
      418. reused converter!
      419. allocating new converter!
      420. allocating new converter!
      421. reused converter!
      422. allocating new converter!
      423. allocating new converter!
      424. reused converter!
      425. allocating new converter!
      426. allocating new converter!
      427. allocating new converter!
      428. allocating new converter!
      429. allocating new converter!
      430. reused converter!
      431. reused converter!
      432. reused converter!
      433. reused converter!
      434. reused converter!
      435. reused converter!
      436. reused converter!
      437. reused converter!
      438. reused converter!
      439. reused converter!
      440. reused converter!
      441. reused converter!
      442. reused converter!
      443. reused converter!
      444. allocating new converter!
      445. allocating new converter!
      446. allocating new converter!
      447. playing 1:0:19:83:6:85:C00000:0:0:0:
      448. [Picon Renderer] not found: /autofs/sdb1/piconHD/SKY CINEMA HD.png
      449. [Picon Renderer] not found: /autofs/sdb1/piconlcd/SKY CINEMA HD.png
      450. [Picon Renderer] not found: /autofs/sdb1/piconlcd/1_0_19_83_6_85_C00000_0_0_0.png
      451. [Picon Renderer] Sorry, i give up!
      452. not pauseable.
      453. RemovePopup, id = ZapError
      454. allocate channel.. 0006:0085
      455. opening frontend 0
      456. [eDVBCAService] new channel 0x1939fd0!
      457. (0)tune
      458. RotorCmd ffffffff, lastRotorCmd ffffffff
      459. prepare_sat System 1 Freq 11914500 Pol 0 SR 27500000 INV 2 FEC 9 orbpos 192 system 1 modulation 1 pilot 2, rolloff 0
      460. tuning to 1314 mhz
      461. OURSTATE: tuning
      462. allocate Channel: res 0
      463. [eDVBCIInterfaces] addPMTHandler 1:0:19:83:6:85:C00000:0:0:0:
      464. allocate demux
      465. resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
      466. resolve: -> /etc/scan_tp_valid_check.py
      467. [SEC] set static current limiting
      468. set sequence pos 3
      469. set sequence pos 4
      470. [SEC] setVoltage 2
      471. [SEC] sleep 200ms
      472. child has terminated
      473. pipes closed
      474. child has terminated
      475. pipes closed
      476. [ePopen] command: route -n | grep eth0
      477. child has terminated
      478. pipes closed
      479. [ePopen] command: route -n | grep ath0
      480. poll: unhandled POLLERR/HUP/NVAL for fd 31(16)
      481. child has terminated
      482. pipes closed
      483. poll: unhandled POLLERR/HUP/NVAL for fd 36(16)
      484. poll: unhandled POLLERR/HUP/NVAL for fd 37(16)
      485. poll: unhandled POLLERR/HUP/NVAL for fd 39(16)
      486. child has terminated
      487. pipes closed
      488. poll: unhandled POLLERR/HUP/NVAL for fd 46(16)
      489. [SEC] invalidate current switch params
      490. [SEC] sendDiseqc: e00000(DiSEqC reset)
      491. [SEC] sleep 50ms
      492. child has terminated
      493. pipes closed
      494. 192.168
      495. 169.254
      496. 0.0.0.0
      497. child has terminated
      498. pipes closed
      499. nameservers: [[192, 168, 178, 1]]
      500. read configured interface: {'lo': {'dhcp': False}, 'ath0': {'dhcp': True}, 'eth0': {'dhcp': False}}
      501. self.ifaces after loading: {'ath0': {'preup': False, 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0], 'postdown': False}, 'eth0': {'preup': False, 'ip': [192, 168, 178, 102], 'up': True, 'mac': '00:09:34:1c:94:f6', 'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1], 'postdown': False}}
      502. [Toplevel.importExternalModules] Could NOT import external module: AutoTimer
      503. [Toplevel.importExternalModules] Exception Caught
      504. No module named AutoTimer.AutoTimerResource
      505. [Toplevel.importExternalModules] Could NOT import external module: EPGRefresh
      506. [Toplevel.importExternalModules] Exception Caught
      507. No module named EPGRefresh.EPGRefreshResource
      508. [Toplevel.importExternalModules] Imported external module: Example
      509. [WebInterface] checking for SSL Certificates
      510. [Webinterface] started on 0.0.0.0:80 auth=False ssl=False
      511. [WebInterface.registerBonjourService] No module named Bonjour.Bonjour
      512. [Webinterface] started on 0.0.0.0:443 auth=True ssl=True
      513. [WebInterface.registerBonjourService] No module named Bonjour.Bonjour
      514. poll: unhandled POLLERR/HUP/NVAL for fd 37(16)
      515. poll: unhandled POLLERR/HUP/NVAL for fd 38(16)
      516. [CrashlogAutoSubmit] gotMXServer: 82.149.226.184
      517. [CrashlogAutoSubmit] - mxServerFound --> 82.149.226.184
      518. [CrashlogAutoSubmit] - found crashlog: enigma2_crash_1295797128.log
      519. [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
      520. [91m[ExtendedInfoBar] CAIDs: ['1833'][m
      521. [91m[ExtendedInfoBar] SID: 0083[m
      522. [SEC] sleep 150ms
      523. child has terminated
      524. pipes closed
      525. poll: unhandled POLLERR/HUP/NVAL for fd 63(16)
      526. [SEC] sendDiseqc: e01038f3
      527. [SEC] sleep 50ms
      528. set sequence pos 3
      529. [SEC] setTone 1
      530. [SEC] sleep 10ms
      531. [SEC] update current switch params
      532. [SEC] startTuneTimeout 5000
      533. [SEC] setFrontend 1
      534. setting frontend 0
      535. [SEC] sleep 500ms
      536. (0)fe event: status 0, inversion off, m_tuning 1
      537. (0)fe event: status 1, inversion off, m_tuning 2
      538. (0)fe event: status 1f, inversion on, m_tuning 3
      539. OURSTATE: ok
      540. [eDVBCAService] channel 0x1939fd0 running
      541. [eDVBLocalTimerHandler] channel 0x1939fd0 running
      542. no version filtering
      543. 0014: 70 00 00 00 00 00
      544. mask: fc 00 00 00 00 00
      545. mode: 00 00 00 00 00 00
      546. [eEPGCache] channel 0x1939fd0 running
      547. stop release channel timer
      548. no version filtering
      549. 0012: 4e 00 83 00 00 00
      550. mask: ff ff ff 00 00 00
      551. mode: 00 00 00 00 00 00
      552. ok ... now we start!!
      553. no version filtering
      554. 0000: 00 00 00 00 00 00
      555. mask: ff 00 00 00 00 00
      556. mode: 00 00 00 00 00 00
      557. eventNewProgramInfo 0 0
      558. have 1 video stream(s) (04ff), and 1 audio stream(s) (0503), and the pcr pid is 04ff, and the text pid is 0020
      559. allocate demux
      560. disable teletext subtitles
      561. decoder state: play, vpid=1279, apid=1283
      562. DMX_SET_PES_FILTER(0x4ff) - pcr - ok
      563. DEMUX_START - pcr - ok
      564. DMX_SET_PES_FILTER(0x503) - audio - ok
      565. DEMUX_START - audio - ok
      566. AUDIO_SET_BYPASS(0) - ok
      567. AUDIO_PAUSE - ok
      568. AUDIO_PLAY - [EPGC] next update in 2 sec
      569. ok
      570. Video Device: /dev/dvb/adapter0/video0
      571. demux device: /dev/dvb/adapter0/demux0
      572. VIDEO_SET_STREAMTYPE 1 - ok
      573. DMX_SET_PES_FILTER(0x4ff) - video - ok
      574. DEMUX_START - video - ok
      575. VIDEO_FREEZE - ok
      576. VIDEO_PLAY - ok
      577. DMX_SET_PES_FILTER(0x20) - ttx - ok
      578. DEMUX_START - ttx - ok
      579. VIDEO_SLOWMOTION(0) - ok
      580. VIDEO_FAST_FORWARD(0) - ok
      581. VIDEO_CONTINUE - ok
      582. AUDIO_CONTINUE - ok
      583. AUDIO_CHANNEL_SELECT(0) - ok
      584. not pauseable.
      585. [AutoRes] service changed
      586. -+ 1/2 TID 4e
      587. nr_read 61809 nr_write 18231
      588. sum 80040 prev_sum 80038
      589. hdd was accessed since previous check!
      590. [IDLE] 0 60 False
      591. + 1/1 TID 00
      592. done!
      593. PATready
      594. use pmtpid 0064 for service_id 0083
      595. no version filtering
      596. 0064: 02 00 83 00 00 00
      597. mask: ff ff ff 00 00 00
      598. mode: 00 00 00 00 00 00
      599. doing version filtering
      600. 0000: 00 00 00 01 00 00
      601. mask: ff 00 00 3f 00 00
      602. mode: 00 00 00 3e 00 00
      603. + 1/1 TID 02
      604. done!
      605. eventNewProgramInfo 0 0
      606. have 1 video stream(s) (04ff), and 2 audio stream(s) (0503, 0504), and the pcr pid is 04ff, and the text pid is 0020
      607. decoder state: play, vpid=1279, apid=1283
      608. [eDVBCAService] new service 1:0:19:83:6:85:C00000:0:0:0:
      609. [eDVBCAService] add demux 0 to slot 0 service 1:0:19:83:6:85:C00000:0:0:0:
      610. [eDVBCIInterfaces] gotPMT
      611. demux 0 mask 01 prevhash 00000000
      612. [eDVBCAService] send 79 bytes
      613. 9f 80 32 4b 03 00 83 07 00 31 01 81 08 00 c0 00 00 00 06 00 85 82 02 01 00 84 02 00 64 09 04 18 33 f8 b6 09 04 18 34 fc b6 09 04 09 c4 fb b6 09 04 09 c7 fd b6 09 04 09 af ff b6 06 00 20 00 00 1b 04 ff 00 00 06 05 03 00 00 06 05 04 00 00
      614. doing version filtering
      615. 0064: 02 00 83 07 00 00
      616. mask: ff ff ff 3f 00 00
      617. mode: 00 00 00 3e 00 00
      618. [SEC] set dynamic current limiting
      619. child has terminated
      620. pipes closed
      621. [InstallerUpdateCheck] No updates available
      622. [InstallerUpdateCheck] next check at Mon Jan 31 18:48:15 2011
      623. poll: unhandled POLLERR/HUP/NVAL for fd 34(16)
      624. ++ 2/2 TID 4e
      625. done!
      626. doing version filtering
      627. 0012: 4e 00 83 2d 00 00
      628. mask: ff ff ff 3f 00 00
      629. mode: 00 00 00 3e 00 00
      630. [AutoRes] determineContent
      631. sdt update done!
      632. [eDVBLocalTimerHandler] diff is 1
      633. [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
      634. [eDVBLocalTimerHandler] update RTC
      635. [eDVBLocalTimerHandler] time update to 18:48:17
      636. [eDVBLocalTimerHandler] m_time_difference is 1
      637. [eDVBLocalTimerHandler] set Linux Time
      638. [EPGC] start caching events(1295891298)
      639. nr_read 61809 nr_write 18233
      640. sum 80042 prev_sum 80040
      641. hdd was accessed since previous check!
      642. [IDLE] 0 60 False
      643. action -> WizardActions down
      644. action -> DirectionActions downUp
      645. unknown action DirectionActions/downUp! typo in keymap?
      646. action -> WizardActions down
      647. action -> DirectionActions downUp
      648. unknown action DirectionActions/downUp! typo in keymap?
      649. [EPGC] abort non avail viasat reading
      650. [EPGC] abort non avail mhw reading
      651. [EPGC] nownext finished(1295891305)
      652. action -> WizardActions ok
      653. [CrashlogAutoSubmit] - handleAnswer --> send_not
      654. [CrashlogAutoSubmit] - not sending crashlogs for this time.
      655. nr_read 61809 nr_write 18233
      656. sum 80042 prev_sum 80042
      657. hdd IDLE!
      658. [IDLE] 6.00000405312 60 False
      659. [EPGC] schedule finished(1295891308)
      660. nr_read 61809 nr_write 18233
      661. sum 80042 prev_sum 80042
      662. hdd IDLE!
      663. [IDLE] 11.9999809265 60 False
      664. [EPGC] schedule other finished(1295891315)
      665. [EPGC] stop caching events(1295891315)
      666. [EPGC] next update in 60 min
      667. no ancillary data in audio stream... abort radiotext pes parser
      668. nr_read 61809 nr_write 18233
      669. sum 80042 prev_sum 80042
      670. hdd IDLE!
      671. [IDLE] 17.9999718666 60 False
      672. nr_read 61809 nr_write 18233
      673. sum 80042 prev_sum 80042
      674. hdd IDLE!
      675. [IDLE] 23.9999549389 60 False
      676. nr_read 61809 nr_write 18235
      677. sum 80044 prev_sum 80042
      678. hdd was accessed since previous check!
      679. [IDLE] 0 60 False
      680. nr_read 61809 nr_write 18235
      681. sum 80044 prev_sum 80044
      682. hdd IDLE!
      683. [IDLE] 5.99998998642 60 False
      684. action -> InfobarMenuActions mainMenu
      685. loading mainmenu XML...
      686. TimerEdit TimerEditList
      687. PluginBrowser PluginBrowser
      688. allocating new converter!
      689. allocating new converter!
      690. allocating new converter!
      691. allocating new converter!
      692. allocating new converter!
      693. allocating new converter!
      694. allocating new converter!
      695. allocating new converter!
      696. allocating new converter!
      697. allocating new converter!
      698. allocating new converter!
      699. allocating new converter!
      700. allocating new converter!
      701. allocating new converter!
      702. allocating new converter!
      703. allocating new converter!
      704. allocating new converter!
      705. allocating new converter!
      706. allocating new converter!
      707. allocating new converter!
      708. allocating new converter!
      709. allocating new converter!
      710. nr_read 61809 nr_write 18235
      711. sum 80044 prev_sum 80044
      712. hdd IDLE!
      713. [IDLE] 11.9999909401 60 False
      714. action -> OkCancelActions ok
      715. okbuttonClick
      716. Ci CiSelection
      717. ParentalControlSetup ParentalControlSetup
      718. allocating new converter!
      719. allocating new converter!
      720. allocating new converter!
      721. allocating new converter!
      722. allocating new converter!
      723. allocating new converter!
      724. allocating new converter!
      725. allocating new converter!
      726. allocating new converter!
      727. allocating new converter!
      728. allocating new converter!
      729. allocating new converter!
      730. allocating new converter!
      731. allocating new converter!
      732. allocating new converter!
      733. allocating new converter!
      734. action -> OkCancelActions ok
      735. okbuttonClick
      736. LanguageSelection LanguageSelection
      737. NetworkSetup NetworkAdapterSelection
      738. InputDeviceSetup InputDeviceSelection
      739. RecordPaths RecordPathsSettings
      740. allocating new converter!
      741. allocating new converter!
      742. action -> OkCancelActions ok
      743. okbuttonClick
      744. HarddiskSetup HarddiskSelection
      745. HarddiskSetup HarddiskFsckSelection
      746. allocating new converter!
      747. allocating new converter!
      748. nr_read 61809 nr_write 18235
      749. sum 80044 prev_sum 80044
      750. hdd IDLE!
      751. [IDLE] 18.0000648499 60 False
      752. action -> OkCancelActions ok
      753. okbuttonClick
      754. action -> OkCancelActions ok
      755. action -> ShortcutActions red
      756. nr_read 61809 nr_write 18235
      757. sum 80044 prev_sum 80044
      758. hdd IDLE!
      759. [IDLE] 23.9999790192 60 False
      760. [EPGC] start cleanloop
      761. [EPGC] stop cleanloop
      762. [EPGC] 376900 bytes for cache used
      763. action -> MsgBoxActions ok
      764. this will start either the initialize or the fsck now!
      765. BusyBox v1.15.3 (2010-12-22 13:14:30 UTC) multi-call binary
      767. Usage: umount [flags] FILESYSTEM|DIRECTORY
      769. Unmount file systems
      771. Options:
      772. -a Unmount all file systems
      773. -r Try to remount devices as read-only if mount is busy
      774. -l Lazy umount (detach filesystem)
      775. -f Force umount (i.e., unreachable NFS server)
      776. -d Free loop device if it has been used
      778. Checking that no-one is using this disk right now ...
      779. BLKRRPART: Invalid argument
      780. OK
      782. Disk /dev/sda: 60801 cylinders, 255 heads, 63 sectors/track
      783. Old situation:
      784. Units = sectors of 512 bytes, counting from 0
      786. Device Boot Start End #sectors Id System
      787. /dev/sda1 8 976768064 976768057 83 Linux
      788. /dev/sda2 0 - 0 0 Empty
      789. /dev/sda3 0 - 0 0 Empty
      790. /dev/sda4 0 - 0 0 Empty
      791. New situation:
      792. Units = sectors of 512 bytes, counting from 0
      794. Device Boot Start End #sectors Id System
      795. /dev/sda1 8 976768064 976768057 83 Linux
      796. /dev/sda2 0 - 0 0 Empty
      797. /dev/sda3 0 - 0 0 Empty
      798. /dev/sda4 0 - 0 0 Empty
      799. Warning: no primary partition is marked bootable (active)
      800. This does not matter for LILO, but the DOS MBR will not boot this disk.
      801. Successfully wrote the new partition table
      803. Re-reading the partition table ...
      804. BLKRRPART: Success
      806. If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
      807. to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1
      808. (See fdisk(8).)
      809. main thread is non-idle! display spinner!
      810. mke2fs 1.41.9 (22-Aug-2009)
      811. Could not stat /dev/sda1 --- No such file or directory
      813. The device apparently does not exist; did you specify it correctly?
      814. nr_read 61809 nr_write 18236
      815. sum 80045 prev_sum 80044
      816. hdd was accessed since previous check!
      817. [IDLE] 0 60 False
      818. Result: -2
      819. ERROR reading PES (fd=58) - Value too large for defined data type
      820. poll: unhandled POLLERR/HUP/NVAL for fd 58(8)
      821. nr_read 61809 nr_write 18236
      822. sum 80045 prev_sum 80045
      823. hdd IDLE!
      824. [IDLE] 0.207302808762 60 False
      825. nr_read 61809 nr_write 18236
      826. sum 80045 prev_sum 80045
      827. hdd IDLE!
      828. [IDLE] 6.20730185509 60 False
      829. nr_read 61809 nr_write 18236
      830. sum 80045 prev_sum 80045
      831. hdd IDLE!
      832. [IDLE] 12.2073009014 60 False
      833. nr_read 61809 nr_write 18236
      834. sum 80045 prev_sum 80045
      835. hdd IDLE!
      836. [IDLE] 18.2073178291 60 False
      837. It's now Mon Jan 24 18:49:50 2011
      838. [timer.py] next activation: 1295891490 (in 99997 ms)
      839. It's now Mon Jan 24 18:49:50 2011
      840. [timer.py] next activation: 1295891490 (in 99995 ms)
      841. nr_read 61809 nr_write 18236
      842. sum 80045 prev_sum 80045
      843. hdd IDLE!
      844. [IDLE] 24.2073199749 60 False
      845. nr_read 61809 nr_write 18236
      846. sum 80045 prev_sum 80045
      847. hdd IDLE!
      848. [IDLE] 30.2073059082 60 False
      849. nr_read 61809 nr_write 18236
      850. sum 80045 prev_sum 80045
      851. hdd IDLE!
      852. [IDLE] 36.2073149681 60 False
      853. nr_read 61809 nr_write 18236
      854. sum 80045 prev_sum 80045
      855. hdd IDLE!
      856. [IDLE] 42.2073068619 60 False
      857. action -> MsgBoxActions ok
      858. action -> OkCancelActions cancel
      859. nr_read 61809 nr_write 18236
      860. sum 80045 prev_sum 80045
      861. hdd IDLE!
      862. [IDLE] 48.2073159218 60 False
      863. action -> OkCancelActions cancel
      864. [EPGC] start cleanloop
      865. [EPGC] stop cleanloop
      866. [EPGC] 375989 bytes for cache used
      867. action -> OkCancelActions ok
      868. okbuttonClick
      869. action -> OkCancelActions ok
      870. nr_read 61809 nr_write 18236
      871. sum 80045 prev_sum 80045
      872. hdd IDLE!
      873. [IDLE] 54.2073099613 60 False
      874. action -> ShortcutActions red
      875. action -> DirectionActions down
      876. action -> DirectionActions downUp
      877. unknown action DirectionActions/downUp! typo in keymap?
      878. action -> MsgBoxActions ok
      879. action -> OkCancelActions cancel
      880. action -> OkCancelActions cancel
      881. nr_read 61809 nr_write 18236
      882. sum 80045 prev_sum 80045
      883. hdd IDLE!
      884. [IDLE] 60.2073159218 60 False
      885. [ePopen] command: ('hdparm', 'hdparm', '-y', '/dev/sda')
      886. child has terminated
      887. pipes closed
      888. poll: unhandled POLLERR/HUP/NVAL for fd 67(16)
      889. action -> OkCancelActions ok
      890. okbuttonClick
      891. nr_read 61809 nr_write 18236
      892. sum 80045 prev_sum 80045
      893. hdd IDLE!
      894. [IDLE] 66.2078609467 60 True
      895. nr_read 61809 nr_write 18236
      896. sum 80045 prev_sum 80045
      897. hdd IDLE!
      898. [IDLE] 72.2073018551 60 True
      899. nr_read 61809 nr_write 18236
      900. sum 80045 prev_sum 80045
      901. hdd IDLE!
      902. [IDLE] 78.2073159218 60 True
      903. nr_read 61809 nr_write 18236
      904. sum 80045 prev_sum 80045
      905. hdd IDLE!
      906. [IDLE] 84.2073118687 60 True
      907. nr_read 61809 nr_write 18236
      908. sum 80045 prev_sum 80045
      909. hdd IDLE!
      910. [IDLE] 90.2073178291 60 True
      911. nr_read 61809 nr_write 18236
      912. sum 80045 prev_sum 80045
      913. hdd IDLE!
      914. [IDLE] 96.207297802 60 True
      915. nr_read 61809 nr_write 18236
      916. sum 80045 prev_sum 80045
      917. hdd IDLE!
      918. [IDLE] 102.207314014 60 True
      919. nr_read 61809 nr_write 18236
      920. sum 80045 prev_sum 80045
      921. hdd IDLE!
      922. [IDLE] 108.207295895 60 True
      923. [EPGC] start cleanloop
      924. [EPGC] stop cleanloop
      925. [EPGC] 375920 bytes for cache used
      926. nr_read 61809 nr_write 18236
      927. sum 80045 prev_sum 80045
      928. hdd IDLE!
      929. [IDLE] 114.207321882 60 True
      930. nr_read 61809 nr_write 18236
      931. sum 80045 prev_sum 80045
      932. hdd IDLE!
      933. [IDLE] 120.207299948 60 True
      934. It's now Mon Jan 24 18:51:30 2011
      935. [timer.py] next activation: 1295891590 (in 99999 ms)
      936. It's now Mon Jan 24 18:51:30 2011
      937. [timer.py] next activation: 1295891590 (in 99997 ms)
      938. nr_read 61809 nr_write 18236
      939. sum 80045 prev_sum 80045
      940. hdd IDLE!
      941. [IDLE] 126.207317829 60 True
      942. nr_read 61809 nr_write 18236
      943. sum 80045 prev_sum 80045
      944. hdd IDLE!
      945. [IDLE] 132.207309008 60 True
      946. nr_read 61809 nr_write 18236
      947. sum 80045 prev_sum 80045
      948. hdd IDLE!
      949. [IDLE] 138.207350016 60 True
      950. nr_read 61809 nr_write 18236
      951. sum 80045 prev_sum 80045
      952. hdd IDLE!
      953. [IDLE] 144.207304955 60 True
      954. nr_read 61809 nr_write 18236
      955. sum 80045 prev_sum 80045
      956. hdd IDLE!
      957. [IDLE] 150.207314014 60 True
      958. nr_read 61809 nr_write 18236
      959. sum 80045 prev_sum 80045
      960. hdd IDLE!
      961. [IDLE] 156.207320929 60 True
      962. nr_read 61809 nr_write 18236
      963. sum 80045 prev_sum 80045
      964. hdd IDLE!
      965. [IDLE] 162.207314968 60 True
      966. nr_read 61809 nr_write 18236
      967. sum 80045 prev_sum 80045
      968. hdd IDLE!
      969. [IDLE] 168.207321882 60 True
      970. [EPGC] start cleanloop
      971. [EPGC] stop cleanloop
      972. [EPGC] 375920 bytes for cache used
      973. nr_read 61809 nr_write 18236
      974. sum 80045 prev_sum 80045
      975. hdd IDLE!
      976. [IDLE] 174.207311869 60 True
      977. nr_read 61809 nr_write 18236
      978. sum 80045 prev_sum 80045
      979. hdd IDLE!
      980. [IDLE] 180.207328796 60 True
      981. nr_read 61809 nr_write 18236
      982. sum 80045 prev_sum 80045
      983. hdd IDLE!
      984. [IDLE] 186.207290888 60 True
      985. nr_read 61809 nr_write 18236
      986. sum 80045 prev_sum 80045
      987. hdd IDLE!
      988. [IDLE] 192.207319021 60 True
      989. nr_read 61809 nr_write 18236
      990. sum 80045 prev_sum 80045
      991. hdd IDLE!
      992. [IDLE] 198.207314014 60 True
      993. nr_read 61809 nr_write 18236
      994. sum 80045 prev_sum 80045
      995. hdd IDLE!
      996. [IDLE] 204.207314014 60 True
      997. nr_read 61809 nr_write 18236
      998. sum 80045 prev_sum 80045
      999. hdd IDLE!
      1000. [IDLE] 210.207307816 60 True
      1001. nr_read 61809 nr_write 18236
      1002. sum 80045 prev_sum 80045
      1003. hdd IDLE!
      1004. [IDLE] 216.207294941 60 True
      1005. It's now Mon Jan 24 18:53:10 2011
      1006. [timer.py] next activation: 1295891690 (in 99998 ms)
      1007. It's now Mon Jan 24 18:53:10 2011
      1008. [timer.py] next activation: 1295891690 (in 99997 ms)
      1009. nr_read 61809 nr_write 18236
      1010. sum 80045 prev_sum 80045
      1011. hdd IDLE!
      1012. [IDLE] 222.207311869 60 True
      1013. nr_read 61809 nr_write 18236
      1014. sum 80045 prev_sum 80045
      1015. hdd IDLE!
      1016. [IDLE] 228.207307816 60 True
      1017. [EPGC] start cleanloop
      1018. [EPGC] stop cleanloop
      1019. [EPGC] 375920 bytes for cache used
      1020. nr_read 61809 nr_write 18236
      1021. sum 80045 prev_sum 80045
      1022. hdd IDLE!
      1023. [IDLE] 234.207302809 60 True
      1024. nr_read 61809 nr_write 18236
      1025. sum 80045 prev_sum 80045
      1026. hdd IDLE!
      1027. [IDLE] 240.207315922 60 True
      1028. nr_read 61809 nr_write 18236
      1029. sum 80045 prev_sum 80045
      1030. hdd IDLE!
      1031. [IDLE] 246.207329988 60 True
      1032. nr_read 61809 nr_write 18236
      1033. sum 80045 prev_sum 80045
      1034. hdd IDLE!
      1035. [IDLE] 252.207326889 60 True
      1036. nr_read 61809 nr_write 18236
      1037. sum 80045 prev_sum 80045
      1038. hdd IDLE!
      1039. [IDLE] 258.207298994 60 True
      1040. nr_read 61809 nr_write 18236
      1041. sum 80045 prev_sum 80045
      1042. hdd IDLE!
      1043. [IDLE] 264.207309008 60 True
      1044. nr_read 61809 nr_write 18236
      1045. sum 80045 prev_sum 80045
      1046. hdd IDLE!
      1047. [IDLE] 270.207305908 60 True
      1048. nr_read 61809 nr_write 18236
      1049. sum 80045 prev_sum 80045
      1050. hdd IDLE!
      1051. [IDLE] 276.207307816 60 True
      1052. nr_read 61809 nr_write 18236
      1053. sum 80045 prev_sum 80045
      1054. hdd IDLE!
      1055. [IDLE] 282.207285881 60 True
      1056. stopService
      1057. [eDVBCAService] free slot 0 demux 0 for service 1:0:19:83:6:85:C00000:0:0:0:
      1058. [eDVBCAService] free service 1:0:19:83:6:85:C00000:0:0:0:
      1059. decoder state: play, vpid=-1, apid=-1
      1060. DEMUX_STOP - pcr - ok
      1061. DEMUX_STOP - video - ok
      1062. VIDEO_STOP - ok
      1063. AUDIO_STOP - ok
      1064. DEMUX_STOP - audio - ok
      1065. AUDIO_CONTINUE - ok
      1066. DEMUX_STOP - ttx - ok
      1067. start release channel timer
      1068. [CrashlogAutoSubmit] - autostart
      1069. resolve: resolve ${sysconfdir}/enigma2/lamedb
      1070. resolve: -> /etc/enigma2/lamedb
      1071. ---- saving lame channel db
      1072. saved 84 channels and 1499 services!
      1073. release cached channel (timer timeout)
      1074. [eDVBCAService] remove channel 0x1939fd0
      1075. [eDVBLocalTimerHandler] remove channel 0x1939fd0
      1076. [eEPGCache] remove channel 0x1939fd0
      1077. stop release channel timer
      1078. main thread is non-idle! display spinner!
      1079. [EPGC] store epg to realpath '/media/hdd/epg.dat'
      1080. [EPGC] 6843 events written to /hdd/epg.dat
      1081. thread joined 0
      1082. set RTC to previous valid time
      1083. - (41) eServiceFactoryM2TS
      1084. - (41) eServiceFactoryMP3
      1085. - (41) eServiceFactoryFS
      1086. - (41) eServiceFactoryDVB
      1087. - (41) eServiceFactoryDVD
      1088. - (40) eServiceCenter
      1089. - (35) CI Slots
      1090. - (30) eActionMap
      1091. - (21) input device driver
      1092. - (21) Console RC Driver
      1093. - (20) DVB-CI UI
      1094. - (20) UHF Modulator
      1095. - (20) RC Input layer
      1096. - (20) misc options
      1097. - (20) AVSwitch Driver
      1098. - (15) eWindowStyleManager
      1099. - (10) gRC
      1100. waiting for gRC thread shutdown
      1101. gRC thread has finished
      1102. - (9) GFBDC
      1103. - (9) gLCDDC
      1104. - (9) Font Render Class
      1105. - (8) graphics acceleration manager
      1106. - (1) Background File Eraser
      1107. reached rl -1
      1108. close frontend 0
      1109. root@dm8000:~# root
      1110. -sh: root: not found
      1111. root@dm8000:~# exit
      Alles anzeigen

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von the-grosser ()

    • Hatte mit meiner Dream 8000 auch mal die Probleme mit dem initialisieren.

      Habe dann erst ein Dream Multimedia Image geflasht, Platte initialisiert und danach direkt Newnigma2 geflasht.

      Danach ging alles wunderbar.

    • danke max aber das ist nicht nötig ..
      Bitte empfehlt den usern nicht immer so einen Unsinn.
      Der Fehler den wir damals hatten ist schon längst behoben und wir machen da auch nichts anderes als DMM.

      @the-grosser
      Mache mal deine Änderung in der fstab rückgängig,reboote und versuche es nochmal, so wie es scheint legt er da keine neue Partition an.

      Plan b.)
      Im FAQ steht beschrieben wie man die Partition von Hand anlegt
      Festplatten initialisierung / Probleme