Hd Temp wird nicht angezeigt

    • Hd Temp wird nicht angezeigt

      Auf meiner 800HDse wird keine HD (TOSHIBA MK1059GS 1TB) Temp. angezeigt.
      Was ist den default für ein Lüfter eingebaut, das Plugin fancontrol 2 will ja wissen wieviel Pin der Lüfter hat, außerdem friert die Box ein wenn ich das Pluin aktivieren will, Programm läuft weiter aber keine Befehle mehr über FB, geht nur meht Üower off schalter ;-).

    • RE: Hd Temp wird nicht angezeigt

      Original von liliom
      Auf meiner 800HDse wird keine HD (TOSHIBA MK1059GS 1TB) Temp. angezeigt.
      Was ist den default für ein Lüfter eingebaut, das Plugin fancontrol 2 will ja wissen wieviel Pin der Lüfter hat, außerdem friert die Box ein wenn ich das Pluin aktivieren will, Programm läuft weiter aber keine Befehle mehr über FB, geht nur meht Üower off schalter ;-).

      Alle Boxen, bei denen ein Lüfter mit geliefert wird, haben 4Pin-Lüfter.
      FC2 und HDD-Temperatur sind doch ersteinmal 2 Dinge. Beschreibe mal etwas genauer, was du alles proiert hast. Was für Infos liefert die WebIF-Ereignisanzeige von FC2. Gibt es dort evtl. ein Hinweis zu erlesen.
      Jörg

    • Original von oZxS
      smartctl -a /dev/sda

      im telnet eingeben und ausgabe posten



      Hier meine Ausgabe:
      ---------------------------------------------------------------------

      === START OF INFORMATION SECTION ===
      Device Model: SAMSUNG HM500JI
      Serial Number: S1WFJDRZ803111
      Firmware Version: 2AC101C4
      User Capacity: 500,107,862,016 bytes
      Device is: In smartctl database [for details use: -P show]
      ATA Version is: 8
      ATA Standard is: Not recognized. Minor revision code: 0x28
      Local Time is: Sun Jan 23 16:15:01 2011 CET

      ==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.

      SMART support is: Available - device has SMART capability.
      SMART support is: Disabled

      SMART Disabled. Use option -s with argument 'on' to enable it.

      --------------------------------------------------------------------------------------------------
      mfg frank

    • Bitte hier meine ausgabe

      *****************************
      * newnigma2.to *
      *****************************
      * the next step is done *
      *****************************
      OpenDreambox
      dm800se login: root
      root@dm800se:~# smartctl -a /dev/sda
      smartctl version 5.38 [mipsel-oe-linux-gnu] Copyright (C) 2002-8 Bruce Allen
      Home page is smartmontools.sourceforge.net/

      === START OF INFORMATION SECTION ===
      Device Model: TOSHIBA MK1059GSM
      Serial Number: 90OYT765T
      Firmware Version: GL001U
      User Capacity: 1,000,204,886,016 bytes
      Device is: Not in smartctl database [for details use: -P showall]
      ATA Version is: 8
      ATA Standard is: Exact ATA specification draft version not indicated
      Local Time is: Sun Jan 23 21:35:10 2011 CET
      SMART support is: Available - device has SMART capability.
      SMART support is: Enabled

      === START OF READ SMART DATA SECTION ===
      SMART overall-health self-assessment test result: PASSED

      General SMART Values:
      Offline data collection status: (0x00) Offline data collection activity
      was never started.
      Auto Offline Data Collection: Disabled.
      Self-test execution status: ( 0) The previous self-test routine completed
      without error or no self-test has ever
      been run.
      Total time to complete Offline
      data collection: ( 120) seconds.
      Offline data collection
      capabilities: (0x5b) SMART execute Offline immediate.
      Auto Offline data collection on/off supp
      ort.
      Suspend Offline collection upon new
      command.
      Offline surface scan supported.
      Self-test supported.
      No Conveyance Self-test supported.
      Selective Self-test supported.
      SMART capabilities: (0x0003) Saves SMART data before entering
      power-saving mode.
      Supports SMART auto save timer.
      Error logging capability: (0x01) Error logging supported.
      General Purpose Logging supported.
      Short self-test routine
      recommended polling time: ( 2) minutes.
      Extended self-test routine
      recommended polling time: ( 255) minutes.
      SCT capabilities: (0x003d) SCT Status supported.
      SCT Feature Control supported.
      SCT Data Table supported.

      SMART Attributes Data Structure revision number: 16
      Vendor Specific SMART Attributes with Thresholds:
      ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_
      FAILED RAW_VALUE
      1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always -
      0
      2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline -
      0
      3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always -
      3814
      4 Start_Stop_Count 0x0032 100 100 000 Old_age Always -
      428
      5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always -
      0
      7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always -
      0
      8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline -
      0
      9 Power_On_Hours 0x0032 098 098 000 Old_age Always -
      903
      10 Spin_Retry_Count 0x0033 108 100 030 Pre-fail Always -
      0
      12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always -
      81
      191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always -
      6
      192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always -
      4
      193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always -
      1610
      194 Temperature_Celsius 0x0022 100 100 000 Old_age Always -
      41 (Lifetime Min/Max 23/41)
      196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always -
      0
      197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always -
      0
      198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline -
      0
      199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always -
      0
      220 Disk_Shift 0x0002 100 100 000 Old_age Always -
      19
      222 Loaded_Hours 0x0032 100 100 000 Old_age Always -
      85
      223 Load_Retry_Count 0x0032 100 100 000 Old_age Always -
      0
      224 Load_Friction 0x0022 100 100 000 Old_age Always -
      0
      226 Load-in_Time 0x0026 100 100 000 Old_age Always -
      421
      240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline -
      0

      SMART Error Log Version: 1
      No Errors Logged

      SMART Self-test log structure revision number 1
      No self-tests have been logged. [To run self-tests, use: smartctl -t]


      SMART Selective self-test log data structure revision number 1
      SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
      1 0 0 Not_testing
      2 0 0 Not_testing
      3 0 0 Not_testing
      4 0 0 Not_testing
      5 0 0 Not_testing
      Selective self-test flags (0x0):
      After scanning selected spans, do NOT read-scan remainder of disk.
      If Selective self-test is pending on power-up, resume after 0 minute delay.

      root@dm800se:~#

    • Hallo,

      ich habe seit ein paar Tagen eine Dreambox 800se mit dem aktuellen Newnigma2 3.1.4 Image. Nach dem Einbau einer Samsung HM100UI 1TB Festplatte habe ich ebenfalls das Problem, dass die Temperatur der Festplate nur mit "0" angezeigt wird. Scheint so, als kommen die smartmontools nicht mit den smart Meldungen klar - hat jemand einen Tipp? Hier das Log:


      root@dm800se:/# smartctl -a /dev/sda

      smartctl version 5.38 [mipsel-oe-linux-gnu] Copyright (C) 2002-8 Bruce Allen
      Home page is smartmontools.sourceforge.net/

      === START OF INFORMATION SECTION ===
      Device Model: SAMSUNG HM100UI
      Serial Number: S2GHJ9AZ939079
      Firmware Version: 2AM10001
      User Capacity: 1,000,204,886,016 bytes
      Device is: In smartctl database [for details use: -P show]
      ATA Version is: 8
      ATA Standard is: Not recognized. Minor revision code: 0x28
      Local Time is: Wed Jan 26 12:12:51 2011 CET

      ==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.

      SMART support is: Available - device has SMART capability.
      SMART support is: Enabled


      === START OF READ SMART DATA SECTION ===

      SMART overall-health self-assessment test result: PASSED

      General SMART Values:
      Offline data collection status: (0x00) Offline data collection activity
      was never started.
      Auto Offline Data Collection: Disabled.
      Self-test execution status: ( 0) The previous self-test routine completed
      without error or no self-test has ever
      been run.
      Total time to complete Offline
      data collection: (14580) seconds.
      Offline data collection
      capabilities: (0x5b) SMART execute Offline immediate.
      Auto Offline data collection on/off support.
      Suspend Offline collection upon new
      command.
      Offline surface scan supported.
      Self-test supported.
      No Conveyance Self-test supported.
      Selective Self-test supported.
      SMART capabilities: (0x0003) Saves SMART data before entering
      power-saving mode.
      Supports SMART auto save timer.
      Error logging capability: (0x01) Error logging supported.
      General Purpose Logging supported.
      Short self-test routine
      recommended polling time: ( 2) minutes.
      Extended self-test routine
      recommended polling time: ( 243) minutes.
      SCT capabilities: (0x003f) SCT Status supported.
      SCT Feature Control supported.
      SCT Data Table supported.

      SMART Attributes Data Structure revision number: 16
      Vendor Specific SMART Attributes with Thresholds:
      ID# ATTRIBUTE_NAME FLAG VALUE WOR
      ST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
      1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 0
      2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
      3 Spin_Up_Time 0x0023 084 084 025 Pre-fail Always - 5007
      4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 30
      5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
      7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
      8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
      9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8
      10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
      11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0
      12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3
      181 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 2790
      181 Unknown_Attribute <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO
      191 G-Sense_Error_Rate <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA
      191 G-Sense_Error_Rate 0x0022 252 252 000 Old_age Always - 0
      191 G-Sense_Error_Rate <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO
      192 Power-Off_Retract_Count <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA
      192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
      192 Power-Off_Retract_Count <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO
      194 Temperature_Celsius <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA
      194 Temperature_Celsius 0x0002 064 064 000 Old_age Always - 32 (Lifetime Min/Max 32/36)
      194 Temperature_Celsius <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO
      195
      Hardware_ECC_Recovered <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA
      195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
      195 Hardware_ECC_Recovered <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO
      196 Reallocated_Event_Count <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA
      196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
      196 Reallocated_Event_Count <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO
      197 Current_Pending_Sector <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA
      197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
      197 Current_Pending_Sector <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO
      198 Offline_Uncorrectable <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA
      198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
      198 Offline_Uncorrectable <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO
      199 UDMA_CRC_Error_Count <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA
      199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
      199 UDMA_CRC_Error_Count <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO
      200 Multi_Zone_Error_Rate <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA
      200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 0
      200 Multi_Zone_Error_Rate <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO
      223 Load_Retry_Count <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA
      223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0
      223 Load_Retry_Count <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO
      225 Load_Cycle_Count <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA
      225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 215
      225 Load_Cycle_Count
      <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO
      0 Unknown_Attribute <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA

      SMART Error Log Version: 1
      No Errors Logged


      SMART Self-test log structure revision number 1
      No self-tests have been logged. [To run self-tests, use: smartctl -t]


      SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1
      SMART Selective self-test log data structure revision number 0
      Warning: ATA Specification requires selective self-test log data structure revision number = 1
      SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
      1 0 0 Completed [00% left] (0-65535)
      2 0 0 Not_testing
      3 0 0 Not_testing
      4 0 0 Not_testing
      5 0 0 Not_testing
      Selective self-test flags (0x0):
      After scanning selected spans, do NOT read-scan remainder of disk.
      If Selective self-test is pending on power-up, resume after 0 minute delay.