#####################################################################
Newnigma2 team proudly presents:
Newnigma2 v4.0.12
#####################################################################
Basics:
DM 7020 HD
changelog E2 05.01.2015:
Notice: Update from v4.0.x to 4.0.12 only possible by updating via console.
Changes:
Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
Multiboot: No support for multiboot. Not planned. No need for such a tool.
GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.
Important changes:
1. Install picons on USB-Drives:
press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.
2. network configuration:
If the IP address assigned manually, as well as the address of the DNS server must be entered.
press menu button -> setup -> system -> network -> adapter settings
3. install or upgrading:
before installing/upgrading packages, we now check if at least are 3mb free space in flash.
ipk's/packages from the newnigma2 team has a value which says the installer the minimum needed space for
the package. if the min required space is not available than the installation aborts.
!! Attention enigma2 ipk needs at least 9mb !!
4. issue due upgrade to v4.0.12:
if you have troubles by upgrading to v4.0.12 even no 9mb free space for the enigma2 package, so
you can first upgrade the newnigma2 installer package. After reboot try to upgrade again via gui, the installer
ignore's now the 9mb needed from the package and uses instead the value you set in
"blue button -> newnigma2 services -> system tools -> expert settings -> min. free space".
Wichtige Änderungen:
1. Picons auf USB-Laufwerken/der internen Festplatte installieren:
USB-Laufwerk über "Menü > Einstellungen > System > Speichergeräte" initialisieren und anschließend mounten"
"blaue Taste > Newnigma Services > System Werkzeuge > Experten Einstellungen > Opkg ignoriere USB/HDD = nein > E2 Neustart und anschließend auf USB installieren"
2. Netzwerk Konfiguration:
"Menü > Einstellungen > System > Netzwerk > LAN oder WLAN > Adapter Einstellungen"
Wird die IP-Adresse manuell konfiguriert so muss zwingend auch die Adresse des DNS-Servers eingetragen werden.
3. Installation oder Update des System:
Es müssen nun mindestens 3 MB freier Flashspeicher zur Verfügung stehen um Installationen/Updates vorzunehmen.
Vor Installation eines ipk's vom newnigma2 team, wird geprüft, ob für dieses Paket noch genügend freier Speicher vorhanden ist.
Sollte das nicht der Fall sein, bricht die Installation ab.
!!Achtung das enigma2 Paket benötigt min 9MB!!
4. Bei Problemen mit dem Update auf v4.0.12:
Sollte das Update auf v4.0.12 nicht funktionieren, weil dem enigma2 Paket keine 9MB zur Verfügung stehen, so ist zuerst der newnigma2 installer zu aktualisieren.
Nach anschließendem reboot kann man den Upgradevorgang via gui fortsetzen. Dabei wird der Check des freien Speichers beim Upgrade auf den Wert gesetzt, der unter
"blaue Taste -> Newnigma Services -> System Werkzeuge -> Experten Einstellungen -> min. free space" eingestellt ist.
Your
Newnigma2 Team
Image:
[Blockierte Grafik: http://pic.newnigma2.to/FAQ/DM7020HD.png][Blockierte Grafik: http://pic.newnigma2.to/FAQ/DM7020HDv2.png]
Newnigma2 team proudly presents:
Newnigma2 v4.0.12
#####################################################################
Basics:
- Enigma2 4.0: 05.01.2015
- Enigma2 Plugins: 06.01.2015
- Newnigma2 Plugins: 06.01.2015
DM 7020 HD
- driver: 16.06.2014
- secondstage: 88
- kernel 3.2.59
changelog E2 05.01.2015:
- auto-fallback for some shoutcast mp3 webradio servers which are unhappy with HBBTV_USER_AGENT string
(fixes GStreamer plugin text/html decoder not avaliable!) - ignore SDT caids when the service already have caids assigned (fixes a CI support bug)
- only add 0x0000 caid as "scrambled by sdt indicator" when no other caid exists on this transponder
- fixed another possible deadlock on skip forward/backward on mediafiles
- fixed crash on change servicelist style after use another ServiceList instance...
- fixed blindscan constellation display
Notice: Update from v4.0.x to 4.0.12 only possible by updating via console.
Changes:
- Added: Skin Evolution-HD by Kerni (thx)
- Added: newnigma2.Kerni.PanTV-HD by Kerni (thx)
- Added: Kerni.Gnome-HD by Kerni (thx)
- Added: VideoDB V2.2 by Dr.Best (click here for more information) (thx)
- Added: mediaportal
- Added: swapmanager
- Added: wget
- Added: stat
- Added: weathercomponent (needed for some skins)
- Added: eventposition (needed for some skins)
- Added: reftopiconname (needed for some skins)
- Added: ledmanager (be carefully changed source="ButtonGreentext" to source="key_green") screen for skinner
- Added: Black-Box.HD.ME (32bit skin)
- Added: cryptsetup more information
- Added: newnigma2-servicerestart: restart services via gui, like init.d, if telnet is not reachable screen for skinner
- Added: free space check's before installing or upgrade packages
- Added: min free flash space is 3mb for installing/upgrading some packages
- Added: improve network connectivity check in newnigma2 installer
- Added: new skin option: progress_pointer (since E2 14.02.2014 possible) screen for skinner
- Added: readded extendedinfobar
- Bugfix: Rebuild Picon handling/loading/caching (less memory consumption)
- Bugfix: Newnigma2 Services fix getPNG cache failure (memoryleak)
- Bugfix: Improved onlineinstaller cache handling (sometimes strange screen output)
- Bugfix: neutrino keymap
- Bugfix: newnigma2.Kerni.PanTV-HD icons
- Bugfix: Caid Renderer didn't close ecm.info and share.info properly
- Bugfix: for loading wrong or no newnigma2 service menu png's
- Bugfix: loosing picon value in servicelist after using configsaver
- Bugfix: for not shown all skins in nenwigma2 installer skin section, like tikila skins
- Bugfix: prevent of loading skin_infobar_wetter.xml on other skins then "newnigma2-" skins
- Bugfix: broken gui installer
- Update: Some improvements on our onlineinstaller
- Update: znc to version 1.4
- Update: openvpn to version 2.3.4
- Update: german translation
- Update: picon renderer. create piconSList dir for servicelist picons.
- Update: IPTV-List-Updater
- Update: cryptsetup
- Update: openssl
- Removed: we have removed non working plugins. most of them are integrated in mediaportal.
- Removed: keymanger plugin from image. It's still available from our feed.
- here u can find USB to UART driver
- here u can find DreamUP V1.3.3.11
Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
Multiboot: No support for multiboot. Not planned. No need for such a tool.
GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.
Important changes:
1. Install picons on USB-Drives:
press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.
2. network configuration:
If the IP address assigned manually, as well as the address of the DNS server must be entered.
press menu button -> setup -> system -> network -> adapter settings
3. install or upgrading:
before installing/upgrading packages, we now check if at least are 3mb free space in flash.
ipk's/packages from the newnigma2 team has a value which says the installer the minimum needed space for
the package. if the min required space is not available than the installation aborts.
!! Attention enigma2 ipk needs at least 9mb !!
4. issue due upgrade to v4.0.12:
if you have troubles by upgrading to v4.0.12 even no 9mb free space for the enigma2 package, so
you can first upgrade the newnigma2 installer package. After reboot try to upgrade again via gui, the installer
ignore's now the 9mb needed from the package and uses instead the value you set in
"blue button -> newnigma2 services -> system tools -> expert settings -> min. free space".
Wichtige Änderungen:
1. Picons auf USB-Laufwerken/der internen Festplatte installieren:
USB-Laufwerk über "Menü > Einstellungen > System > Speichergeräte" initialisieren und anschließend mounten"
"blaue Taste > Newnigma Services > System Werkzeuge > Experten Einstellungen > Opkg ignoriere USB/HDD = nein > E2 Neustart und anschließend auf USB installieren"
2. Netzwerk Konfiguration:
"Menü > Einstellungen > System > Netzwerk > LAN oder WLAN > Adapter Einstellungen"
Wird die IP-Adresse manuell konfiguriert so muss zwingend auch die Adresse des DNS-Servers eingetragen werden.
3. Installation oder Update des System:
Es müssen nun mindestens 3 MB freier Flashspeicher zur Verfügung stehen um Installationen/Updates vorzunehmen.
Vor Installation eines ipk's vom newnigma2 team, wird geprüft, ob für dieses Paket noch genügend freier Speicher vorhanden ist.
Sollte das nicht der Fall sein, bricht die Installation ab.
!!Achtung das enigma2 Paket benötigt min 9MB!!
4. Bei Problemen mit dem Update auf v4.0.12:
Sollte das Update auf v4.0.12 nicht funktionieren, weil dem enigma2 Paket keine 9MB zur Verfügung stehen, so ist zuerst der newnigma2 installer zu aktualisieren.
Nach anschließendem reboot kann man den Upgradevorgang via gui fortsetzen. Dabei wird der Check des freien Speichers beim Upgrade auf den Wert gesetzt, der unter
"blaue Taste -> Newnigma Services -> System Werkzeuge -> Experten Einstellungen -> min. free space" eingestellt ist.
Your
Newnigma2 Team
Image:
[Blockierte Grafik: http://pic.newnigma2.to/FAQ/DM7020HD.png][Blockierte Grafik: http://pic.newnigma2.to/FAQ/DM7020HDv2.png]