plugin for WIFI to lean v.4.??

    • Newnigma2 stable DM800se LEAN v4.0.16 . WIFI.?

      Hi.
      Update from telnet is successful.
      package task-opendreambox-wlan (1.0-r15)installed in flash is up to date.

      Sorry but i can`t get this to work.

      I`m using EDIMAX Wireless 802.1 b/g Turbo Mode
      High-Gain USB Adapter

      no problem if i use PeterPan Image,,but i don`t like that image.
      i hope in next update of Newnigma2 stable DM800se LEAN that WIFI is included.
      but thanks for the help anyway...i use a long LAN cable insted.No More PeterPan for me..

      Have a good weekend :D

    • Hi,
      i have the image of Newnigma2 stable DM800se LEAN v4.0.18
      and I have WiFi stick Logilink WL0084B Ralink RT5370 chipset
      Please tell me where to find drivers.

      Telnet command did:

      Quellcode

      1. opkg update
      2. opkg install task-opendreambox-wlan
      but without result.


      Telnet:
      cat /proc/bus/usb/devices

      Quellcode

      1. T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
      2. D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
      3. P: Vendor=148f ProdID=5370 Rev= 1.01
      4. S: Manufacturer=Ralink
      5. S: Product=802.11 n WLAN
      6. S: SerialNumber=1.0
      7. C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=450mA
      8. I:* If#= 0 Alt= 0 #EPs= 7 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
      9. E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
      10. E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
      11. E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
      12. E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
      13. E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
      Alles anzeigen
      Hardware-IDs

      Quellcode

      1. USB\VID_148F&PID_5370&REV_0101
      2. USB\VID_148F&PID_5370

      Thanks

      Dieser Beitrag wurde bereits 3 mal editiert, zuletzt von widder ()