Hallo,
ich nutze schon seit vielen Jahren VideoDB unter OE2.0/2.2 zu meiner vollsten Zufriedenheit. VideoDB-Datenbank und Filme liegen auf einem NAS, da ich mit mehreren Boxen darauf zugreifen möchte. Befanden sich die HDD's im NAS im Stand by , musste ich ich einen Moment warten, dann lief aber alles perfekt. Nun habe ich vor einiger Zeit auf OE2.5 upgegraded und bekomme Fehlermeldungen und Green Screens, wenn ich VideoDB starte, wenn sich die HDD's im NAS im Stand by befinden. Warte ich einen Moment bis zum vollendetem Spin up der HDD's, funktioniert alles einwandfrei. Verlagere ich die DB von VideoDB in den Flash der DM7080, bekomme ich kein Problem mehr beim Starten von VideoDB, dann aber beim Zugriff auf das .TS File, das abgespielt werden soll. Ich vermute ein Problem im NFS, da ich das Problem auch ganz ohne VideoDB nachstellen kann.
root@dm7080:~# cp /media/zeus/video/3/other/video.ts.cuts /tmp
cp: read error: Input/output error
Ein paar Sekunden später funktioniert alles perfekt.
Ich habe das NAS mit dem Netzwerkbrowser eingebunden. Der Eintrag in /etc/fstab sieht wie folgt aus:
192.168.1.77:/media /media/zeus nfs udp,x-systemd.automount,retrans=1,noauto,wsize=8192,x-systemd.idle-timeout=60,retry=0,nolock,rw,timeo=2,rsize=8192,x-systemd.device-timeout=2,vers=3,soft,nofail 0 0
Hat jemand eine Idee?
Danke, Thomas
ich nutze schon seit vielen Jahren VideoDB unter OE2.0/2.2 zu meiner vollsten Zufriedenheit. VideoDB-Datenbank und Filme liegen auf einem NAS, da ich mit mehreren Boxen darauf zugreifen möchte. Befanden sich die HDD's im NAS im Stand by , musste ich ich einen Moment warten, dann lief aber alles perfekt. Nun habe ich vor einiger Zeit auf OE2.5 upgegraded und bekomme Fehlermeldungen und Green Screens, wenn ich VideoDB starte, wenn sich die HDD's im NAS im Stand by befinden. Warte ich einen Moment bis zum vollendetem Spin up der HDD's, funktioniert alles einwandfrei. Verlagere ich die DB von VideoDB in den Flash der DM7080, bekomme ich kein Problem mehr beim Starten von VideoDB, dann aber beim Zugriff auf das .TS File, das abgespielt werden soll. Ich vermute ein Problem im NFS, da ich das Problem auch ganz ohne VideoDB nachstellen kann.
root@dm7080:~# cp /media/zeus/video/3/other/video.ts.cuts /tmp
cp: read error: Input/output error
Ein paar Sekunden später funktioniert alles perfekt.
Ich habe das NAS mit dem Netzwerkbrowser eingebunden. Der Eintrag in /etc/fstab sieht wie folgt aus:
192.168.1.77:/media /media/zeus nfs udp,x-systemd.automount,retrans=1,noauto,wsize=8192,x-systemd.idle-timeout=60,retry=0,nolock,rw,timeo=2,rsize=8192,x-systemd.device-timeout=2,vers=3,soft,nofail 0 0
Hat jemand eine Idee?
Danke, Thomas